Lightweight & Reliable-Feeding, Ideal For Competition
Lightweight, molded polymer magazine has reinforced steel feed lips to ensure reliable delivery of all 10 rounds to the chamber of your 12 gauge Saiga shotgun. Ideal for the three-gun competition shooter, with deep, waffle texturing on the outside for a secure grasp during high-speed mag changes. Extra length ensures that even when fully loaded there s extra compressibility to the round stack so the magazine can be inserted with the bolt closed.
Leicht und zuverlässig füttern, ideal für den Wettbewerb
Das leichte, geformte Polymermagazin verfügt über verstärkte Stahlzuführlippen, um eine zuverlässige Abgabe aller 10 Patronen an die Kammer Ihrer 12-Gauge-Saiga-Schrotflinte zu gewährleisten. Ideal für den Wettkampfschützen mit drei Geschützen, mit einer tiefen Waffelstruktur an der Aussenseite für einen sicheren Halt beim schnellen Wechsel des Magazins. Durch die zusätzliche Länge wird sichergestellt, dass der Rundstapel auch bei voller Beladung besonders komprimierbar ist, sodass das Magazin bei geschlossenem Riegel eingesetzt werden kann.
SPEZIFIKATIONEN: Verstärktes spritzgegossenes Polymer, schwarz. 10-Runden-Kapazität. Passt nur für Saiga 12 Gauge Shotguns.
Mehr...
Kundenbewertungen zu PRO MAG SAIGA 12 GAUGE 10-ROUND MAGAZINE
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 2.3
Be prepared to hand fit these(11.09.2009)
I bought two of these and had to hand fit both. the plastic that engages the magazine fixed notch (not the release lever) is too long and won't allow the release lever to "click" into battery. Takes about 15 minutes of filing (didn't want to take off too much material). Once fitted they function fine. Tighter fit than SureFire but not as "snick-snick" to insert and release.
Shells jamming(11.11.2010)
The inside shell feeder, part that pushes the shells up, sticks inside while feeding and the shells jams on the inside end of the barrel (AK-12 shotgun). My investigation has found that the inside piece stops it's sliding, free flow no spring, at the top where it looks like part of the form molding was made. I'm going to file this inside area to see if it helps.
saiga 12 promag magazine(04.04.2011)
Almost all magazines require fitting up to your saiga 12. This is done on purpose, because the mfg. of your gun follows a very sloppy tolerance when it comes to dimensions during manufacturing. So to "custom fit " the magazine for every saiga 12 shotgun out there would be impossible for any manufacture of an aftermarket magazine to do for this gun. It feeds with no problems. My exprience so far with any feeding issues has been with the gun and ammo/ gas pressure and gas block settings. Look at these things also before concluding that it is a magazine problem.
Failure to feed(18.09.2012)
This is not a reliable mag. Failure to feed with the first 3 a las 2 rounds.
Needs improvement(18.09.2012)
I bought two of these and fitting them was not a prob but after about 100 rounds shot the spring in one just snapped in two places. I put it back together with ducktape and it works but not reliable anymore. other mag has done great though
Spring failure(01.01.2014)
I bought two of these as other magazines weren't available. The magazines had to be modified to fit the receiver (small common issue), but worked fine with numerous shells up to 3". This lasted for several range trips, until the follower failed to do it's job. After taking apart the mags, the internal spring had fallen apart in several pieces. I would suggest a better quality magazine than these.
Does not fit my Saiga 12(15.09.2014)
Second time I've tried a ProMag magazine. It does not fit the receiver of my Saiga 12.
Artikel-Nr.: 687000029 PRO MAG SAIGA 12 GAUGE 10-ROUND MAGAZINE Herstellerproduktnummer: SAI02708279008719 Das leichte, geformte Polymermagazin verfügt über verstärkte Stahlzuführlippen, um eine zuverlässige Abgabe aller 10 Patronen an die Kammer Ihrer 12-Gauge-Saiga-Schrotflinte zu gewährleisten. Ideal für den Wettkampfschützen mit drei Geschützen, mit einer tiefen Waffelstruktur an der Aussenseite für einen sicheren Halt beim schnellen Wechsel des Magazins. Durch die zusätzliche Länge wird sichergestellt, dass der Rundstapel auch bei voller Beladung besonders komprimierbar ist, sodass das Magazin bei geschlossenem Riegel eingesetzt werden kann.
Made in USA
US-Exportklassifizierung: 0A502
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Lightweight & Reliable-Feeding, Ideal For Competition
Lightweight, molded polymer magazine has reinforced steel feed lips to ensure reliable delivery of all 10 rounds to the chamber of your 12 gauge Saiga shotgun. Ideal for the three-gun competition shooter, with deep, waffle texturing on the outside for a secure grasp during high-speed mag changes. Extra length ensures that even when fully loaded there s extra compressibility to the round stack so the magazine can be inserted with the bolt closed.
Leicht und zuverlässig füttern, ideal für den Wettbewerb
Das leichte, geformte Polymermagazin verfügt über verstärkte Stahlzuführlippen, um eine zuverlässige Abgabe aller 10 Patronen an die Kammer Ihrer 12-Gauge-Saiga-Schrotflinte zu gewährleisten. Ideal für den Wettkampfschützen mit drei Geschützen, mit einer tiefen Waffelstruktur an der Aussenseite für einen sicheren Halt beim schnellen Wechsel des Magazins. Durch die zusätzliche Länge wird sichergestellt, dass der Rundstapel auch bei voller Beladung besonders komprimierbar ist, sodass das Magazin bei geschlossenem Riegel eingesetzt werden kann.
SPEZIFIKATIONEN: Verstärktes spritzgegossenes Polymer, schwarz. 10-Runden-Kapazität. Passt nur für Saiga 12 Gauge Shotguns.
Mehr...
Kundenbewertungen zu PRO MAG SAIGA 12 GAUGE 10-ROUND MAGAZINE
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 2.3
Be prepared to hand fit these(11.09.2009)
I bought two of these and had to hand fit both. the plastic that engages the magazine fixed notch (not the release lever) is too long and won't allow the release lever to "click" into battery. Takes about 15 minutes of filing (didn't want to take off too much material). Once fitted they function fine. Tighter fit than SureFire but not as "snick-snick" to insert and release.
Shells jamming(11.11.2010)
The inside shell feeder, part that pushes the shells up, sticks inside while feeding and the shells jams on the inside end of the barrel (AK-12 shotgun). My investigation has found that the inside piece stops it's sliding, free flow no spring, at the top where it looks like part of the form molding was made. I'm going to file this inside area to see if it helps.
saiga 12 promag magazine(04.04.2011)
Almost all magazines require fitting up to your saiga 12. This is done on purpose, because the mfg. of your gun follows a very sloppy tolerance when it comes to dimensions during manufacturing. So to "custom fit " the magazine for every saiga 12 shotgun out there would be impossible for any manufacture of an aftermarket magazine to do for this gun. It feeds with no problems. My exprience so far with any feeding issues has been with the gun and ammo/ gas pressure and gas block settings. Look at these things also before concluding that it is a magazine problem.
Failure to feed(18.09.2012)
This is not a reliable mag. Failure to feed with the first 3 a las 2 rounds.
Needs improvement(18.09.2012)
I bought two of these and fitting them was not a prob but after about 100 rounds shot the spring in one just snapped in two places. I put it back together with ducktape and it works but not reliable anymore. other mag has done great though
Spring failure(01.01.2014)
I bought two of these as other magazines weren't available. The magazines had to be modified to fit the receiver (small common issue), but worked fine with numerous shells up to 3". This lasted for several range trips, until the follower failed to do it's job. After taking apart the mags, the internal spring had fallen apart in several pieces. I would suggest a better quality magazine than these.
Does not fit my Saiga 12(15.09.2014)
Second time I've tried a ProMag magazine. It does not fit the receiver of my Saiga 12.