Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

BROWNELLS
B&R RECOIL PAD FITTING JIG

050806110250 080000868
Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.

SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.

139.9 139.9 1 CHF
Artikel-Nr.: 080000868
BROWNELLS B&R RECOIL PAD FITTING JIG 050806110250 Einer der schwierigsten Aspekte beim Anbringen eines Rückstosskissens war immer das endgültige Anbringen des Kissens an Holz, da es so einfach ist, den Schaft mit der Scheibe, dem Schleifstreifen oder der Feile zu schlagen - und das Finish zu ruinieren. Die B & R Rückstosskissen-Montagevorrichtung verhindert das Risiko von Materialschäden, indem Sie das Kissen vollständig vom Material entfernen und von diesem entfernen können. Die Schablone besteht aus zwei Grundelementen: (1) einem einstellbaren Dreieck, an dem das Polster angebracht ist, um auf Mass angefertigt zu werden, und (2) einer universellen Halterung, die am Schleifscheibentisch befestigt wird. Die Bedienung ist einfach. Schneiden Sie zuerst den Schaft auf die Länge und Teilung, die für den Kunden erforderlich sind. Befestigen Sie den Block am Schaft und zeichnen Sie den Umriss des Schafts scharf auf den Block. Übertragen Sie dann das Polster auf die Grundplatte der Schablone, stellen Sie den Neigungswinkel ein, setzen Sie die Schablone auf die Halterung und kleiden Sie das Polster so, dass nur die geritzte Linie entfernt wird (dies ist erforderlich, da die Linie ausserhalb des Schafts gezogen wurde ). Zum Schluss testen Sie, ob das Polster am Schaft befestigt ist, und führen Sie bei Bedarf das endgültige Anziehen von Hand durch. Die Linien des Stocks werden korrekt in das Pad getragen - und Sie haben eine perfekte Passform! Die Schablone beseitigt alle Schäden an der Schaftoberfläche und reduziert den gesamten Vorgang der Belagmontage auf eine einfache 15-minütige Übung - was die Arbeit zu einer einfachen und äusserst rentablen macht.
139.9 CHF 0 CHF 139.90 *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften: Hersteller/Modell: Universal Rifles, Universal Shotguns

Eigenschaften

Hersteller/Modell: Universal Rifles,Universal Shotguns Versandgewicht: 0.454kg Versandhöhe: 36mm Versandbreite: 102mm Versandlänge: 533mm

Artikeldetails

Made in USA



Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.

SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.

Newsletter