Supports a polymer frame pistol for armory work and detail disassembly.
Pre-positioned bosses, slots and holes remove pressure from critical function surfaces while pins are driven in and out. Thumb Safety and Magazine disconnect drop into holes and slots to prevent damage no matter what position they are in. High Density Polymer construction prevents marring of the frame while driving pins in and out. Retaining slots on each side of the block hold the striker making removal and installation of the striker spring a breeze. One side is for the 45 striker and the other is for the 9/40/357 striker. Moveable bosses are easily adjustable to position frames quickly and easily. Raised walls on each side of the block position the trigger bar within the trigger to easy trigger swapping. Apex logo and contact information cast directly into the body of the block for easy identification and access to Apex’s tech support staff. The Armorer's Tooling Plate is designed to attach directly to the underside of the Apex Polymer Armorer's Block, providing a raised surface for you to work on your M&P and Glock Pistols. The tooling plate has snap locks and slots to hold the 1/8" custom roll pin punch and 1/16" allen wrench. Rubber feet grip the work surface, allowing for a sturdy hold while working. a ring magnet on the underside of the plate will prevent magnetic parts from escaping.
SPECS: 7” Long x 4” Wide x 1.5” Tall.
Mehr...
Unterstützt eine Polymerrahmenpistole für Rüstungsarbeiten und die Demontage von Details.
Vorpositionierte Vorsprünge, Schlitze und Löcher leiten den Druck von kritischen Funktionsoberflächen ab, während die Stifte ein- und ausgefahren werden. Daumensicherheit und Magazin lösen das Fallenlassen in Löcher und Schlitze, um Beschädigungen zu vermeiden, egal in welcher Position sie sich befinden. Die Konstruktion aus hochdichtem Polymer verhindert, dass der Rahmen beschädigt wird, während Stifte ein- und ausgefahren werden. Halteschlitze an jeder Seite des Blocks halten den Schlagbolzen fest, sodass das Entfernen und Installieren der Schlagfeder ein Kinderspiel wird. Eine Seite ist für den Stürmer 45 und die andere für den Stürmer 9/40/357. Bewegliche Vorsprünge sind leicht einstellbar, um Rahmen schnell und einfach zu positionieren. Erhöhte Wände auf jeder Seite des Blocks positionieren die Abzugstange im Abzug, um ein einfaches Auswechseln des Abzugs zu ermöglichen. Das Apex-Logo und die Kontaktinformationen werden direkt in den Blockkörper eingegossen, sodass die Mitarbeiter des technischen Supports von Apex leicht identifiziert und darauf zugreifen können. Die Armorer's Tooling Plate kann direkt an der Unterseite des Apex Polymer Armorer's Block angebracht werden und bietet eine erhöhte Oberfläche für die Bearbeitung Ihrer M & P- und Glock-Pistolen. Die Werkzeugplatte verfügt über Schnappverschlüsse und Schlitze für den 1/8 "Custom Roll Pin Punch und den 1/16" Inbusschlüssel. Gummifüsse greifen die Arbeitsfläche und sorgen für einen stabilen Halt beim Arbeiten. Ein Ringmagnet an der Unterseite der Platte verhindert, dass magnetische Teile austreten.
Technische Daten: 7 "lang x 4" breit x 1,5 "hoch.
Mehr...
Kundenbewertungen zu APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 3.4
A Nice Addition(19.07.2014)
The Apex Armorer's Tray is a nice complement to the original Apex Armorer's Block. When coupled together, the tray's non-slip pads prevent the pair from moving around as you are working. The embedded ring magnet helps catch metal parts, although it could be a bit stronger. There is also a small fixture in the center of the tray for holding the muzzle steady while removing slide back plates. The included 1/8" roll pin punch and 1/16" hex wrench fit securely into special recesses for storage. There is also a spot for the Talon Tactical Rear Sight Tool (100-005-388WB; sold separately).
The one really disappointing feature of the Armorer's Tray is the cheap 1/16" hex wrench. Most of the bluing came off when I cleaned and oiled it for the first time. I still could have used it, but my obsessive nature forced me to replace it with a much nicer ball-ended hex wrench from Bondhus (Part# 16903). It snaps into the tray for storage, just as the original did, and the added utility of having one ball end is great.
Limited Uses(11.11.2013)
I bought one of these to work on my Glock pistols. I have found that even with two adjustable positioning rollers you are still very limited in the number of positions that you can use it with and the devise would not fit all Glock models I.E. G26, 27, & 33.It did, however hold my G17 & 19 well with the slide removed and the slide lock facing up. A roll of duct tape would work better for my uses.
Very Useful Tool for M&P Upgrades(09.12.2013)
This is a "must have" if you plan on installing the APEX Forward Set Sear or Action Enhancement kits on your M&P pistol. The product is very well thought out. It provides a tight fitting hold for your pistol frame and trigger. I cannot imagine completing these upgrades without this product.
Of Limited Use For Glock Pistols...(18.12.2013)
After using this item for work on Glock only it seems one of the Brownells existing bench blocks is the more appropriate tool. Found it to have very limited use for above make and quite a bit more useful for the M&P models. In a nutshell try one of the poly bench blocks before trying this if your main use will be for Glock Pistols.
Great Product! Works as Described(17.01.2014)
I got this as a gift for Christmas because I do most of my own work on my M&P's it works great and the added bonus of having the trigger spots and firing pin holes is perfect...
Artikel-Nr.: 100011660 APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK Herstellerproduktnummer: 104-001856008005284 Vorpositionierte Vorsprünge, Schlitze und Löcher leiten den Druck von kritischen Funktionsoberflächen ab, während die Stifte ein- und ausgefahren werden. Daumensicherheit und Magazin lösen das Fallenlassen in Löcher und Schlitze, um Beschädigungen zu vermeiden, egal in welcher Position sie sich befinden. Die Konstruktion aus hochdichtem Polymer verhindert, dass der Rahmen beschädigt wird, während Stifte ein- und ausgefahren werden. Halteschlitze an jeder Seite des Blocks halten den Schlagbolzen fest, sodass das Entfernen und Installieren der Schlagfeder ein Kinderspiel wird. Eine Seite ist für den Stürmer 45 und die andere für den Stürmer 9/40/357. Bewegliche Vorsprünge sind leicht einstellbar, um Rahmen schnell und einfach zu positionieren. Erhöhte Wände auf jeder Seite des Blocks positionieren die Abzugstange im Abzug, um ein einfaches Auswechseln des Abzugs zu ermöglichen. Das Apex-Logo und die Kontaktinformationen werden direkt in den Blockkörper eingegossen, sodass die Mitarbeiter des technischen Supports von Apex leicht identifiziert und darauf zugreifen können. Die Armorer's Tooling Plate kann direkt an der Unterseite des Apex Polymer Armorer's Block angebracht werden und bietet eine erhöhte Oberfläche für die Bearbeitung Ihrer M & P- und Glock-Pistolen. Die Werkzeugplatte verfügt über Schnappverschlüsse und Schlitze für den 1/8 "Custom Roll Pin Punch und den 1/16" Inbusschlüssel. Gummifüsse greifen die Arbeitsfläche und sorgen für einen stabilen Halt beim Arbeiten. Ein Ringmagnet an der Unterseite der Platte verhindert, dass magnetische Teile austreten.
74.9CHF0CHF 74.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 100014075 APEX TACTICAL SPECIALTIES INC ARMORER'S BLOCK TOOLING PLATE Herstellerproduktnummer: 104-110856008005291 Vorpositionierte Vorsprünge, Schlitze und Löcher leiten den Druck von kritischen Funktionsoberflächen ab, während die Stifte ein- und ausgefahren werden. Daumensicherheit und Magazin lösen das Fallenlassen in Löcher und Schlitze, um Beschädigungen zu vermeiden, egal in welcher Position sie sich befinden. Die Konstruktion aus hochdichtem Polymer verhindert, dass der Rahmen beschädigt wird, während Stifte ein- und ausgefahren werden. Halteschlitze an jeder Seite des Blocks halten den Schlagbolzen fest, sodass das Entfernen und Installieren der Schlagfeder ein Kinderspiel wird. Eine Seite ist für den Stürmer 45 und die andere für den Stürmer 9/40/357. Bewegliche Vorsprünge sind leicht einstellbar, um Rahmen schnell und einfach zu positionieren. Erhöhte Wände auf jeder Seite des Blocks positionieren die Abzugstange im Abzug, um ein einfaches Auswechseln des Abzugs zu ermöglichen. Das Apex-Logo und die Kontaktinformationen werden direkt in den Blockkörper eingegossen, sodass die Mitarbeiter des technischen Supports von Apex leicht identifiziert und darauf zugreifen können. Die Armorer's Tooling Plate kann direkt an der Unterseite des Apex Polymer Armorer's Block angebracht werden und bietet eine erhöhte Oberfläche für die Bearbeitung Ihrer M & P- und Glock-Pistolen. Die Werkzeugplatte verfügt über Schnappverschlüsse und Schlitze für den 1/8 "Custom Roll Pin Punch und den 1/16" Inbusschlüssel. Gummifüsse greifen die Arbeitsfläche und sorgen für einen stabilen Halt beim Arbeiten. Ein Ringmagnet an der Unterseite der Platte verhindert, dass magnetische Teile austreten.
64.9CHF15CHF 64.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Hersteller/Modell: Glock, Smith & WessonModell: M&P, Universal Handguns
Supports a polymer frame pistol for armory work and detail disassembly.
Pre-positioned bosses, slots and holes remove pressure from critical function surfaces while pins are driven in and out. Thumb Safety and Magazine disconnect drop into holes and slots to prevent damage no matter what position they are in. High Density Polymer construction prevents marring of the frame while driving pins in and out. Retaining slots on each side of the block hold the striker making removal and installation of the striker spring a breeze. One side is for the 45 striker and the other is for the 9/40/357 striker. Moveable bosses are easily adjustable to position frames quickly and easily. Raised walls on each side of the block position the trigger bar within the trigger to easy trigger swapping. Apex logo and contact information cast directly into the body of the block for easy identification and access to Apex’s tech support staff. The Armorer's Tooling Plate is designed to attach directly to the underside of the Apex Polymer Armorer's Block, providing a raised surface for you to work on your M&P and Glock Pistols. The tooling plate has snap locks and slots to hold the 1/8" custom roll pin punch and 1/16" allen wrench. Rubber feet grip the work surface, allowing for a sturdy hold while working. a ring magnet on the underside of the plate will prevent magnetic parts from escaping.
SPECS: 7” Long x 4” Wide x 1.5” Tall.
Mehr...
Unterstützt eine Polymerrahmenpistole für Rüstungsarbeiten und die Demontage von Details.
Vorpositionierte Vorsprünge, Schlitze und Löcher leiten den Druck von kritischen Funktionsoberflächen ab, während die Stifte ein- und ausgefahren werden. Daumensicherheit und Magazin lösen das Fallenlassen in Löcher und Schlitze, um Beschädigungen zu vermeiden, egal in welcher Position sie sich befinden. Die Konstruktion aus hochdichtem Polymer verhindert, dass der Rahmen beschädigt wird, während Stifte ein- und ausgefahren werden. Halteschlitze an jeder Seite des Blocks halten den Schlagbolzen fest, sodass das Entfernen und Installieren der Schlagfeder ein Kinderspiel wird. Eine Seite ist für den Stürmer 45 und die andere für den Stürmer 9/40/357. Bewegliche Vorsprünge sind leicht einstellbar, um Rahmen schnell und einfach zu positionieren. Erhöhte Wände auf jeder Seite des Blocks positionieren die Abzugstange im Abzug, um ein einfaches Auswechseln des Abzugs zu ermöglichen. Das Apex-Logo und die Kontaktinformationen werden direkt in den Blockkörper eingegossen, sodass die Mitarbeiter des technischen Supports von Apex leicht identifiziert und darauf zugreifen können. Die Armorer's Tooling Plate kann direkt an der Unterseite des Apex Polymer Armorer's Block angebracht werden und bietet eine erhöhte Oberfläche für die Bearbeitung Ihrer M & P- und Glock-Pistolen. Die Werkzeugplatte verfügt über Schnappverschlüsse und Schlitze für den 1/8 "Custom Roll Pin Punch und den 1/16" Inbusschlüssel. Gummifüsse greifen die Arbeitsfläche und sorgen für einen stabilen Halt beim Arbeiten. Ein Ringmagnet an der Unterseite der Platte verhindert, dass magnetische Teile austreten.
Technische Daten: 7 "lang x 4" breit x 1,5 "hoch.
Mehr...
Kundenbewertungen zu APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 3.4
A Nice Addition(19.07.2014)
The Apex Armorer's Tray is a nice complement to the original Apex Armorer's Block. When coupled together, the tray's non-slip pads prevent the pair from moving around as you are working. The embedded ring magnet helps catch metal parts, although it could be a bit stronger. There is also a small fixture in the center of the tray for holding the muzzle steady while removing slide back plates. The included 1/8" roll pin punch and 1/16" hex wrench fit securely into special recesses for storage. There is also a spot for the Talon Tactical Rear Sight Tool (100-005-388WB; sold separately).
The one really disappointing feature of the Armorer's Tray is the cheap 1/16" hex wrench. Most of the bluing came off when I cleaned and oiled it for the first time. I still could have used it, but my obsessive nature forced me to replace it with a much nicer ball-ended hex wrench from Bondhus (Part# 16903). It snaps into the tray for storage, just as the original did, and the added utility of having one ball end is great.
Limited Uses(11.11.2013)
I bought one of these to work on my Glock pistols. I have found that even with two adjustable positioning rollers you are still very limited in the number of positions that you can use it with and the devise would not fit all Glock models I.E. G26, 27, & 33.It did, however hold my G17 & 19 well with the slide removed and the slide lock facing up. A roll of duct tape would work better for my uses.
Very Useful Tool for M&P Upgrades(09.12.2013)
This is a "must have" if you plan on installing the APEX Forward Set Sear or Action Enhancement kits on your M&P pistol. The product is very well thought out. It provides a tight fitting hold for your pistol frame and trigger. I cannot imagine completing these upgrades without this product.
Of Limited Use For Glock Pistols...(18.12.2013)
After using this item for work on Glock only it seems one of the Brownells existing bench blocks is the more appropriate tool. Found it to have very limited use for above make and quite a bit more useful for the M&P models. In a nutshell try one of the poly bench blocks before trying this if your main use will be for Glock Pistols.
Great Product! Works as Described(17.01.2014)
I got this as a gift for Christmas because I do most of my own work on my M&P's it works great and the added bonus of having the trigger spots and firing pin holes is perfect...