Eigenschaften
- Farbe: Silver
- Finish: Silver
- Grösse: .837
- Kaliber: 30 Caliber (.308)
- Material: Steel
- Waffentyp: AR-15,AR .308
- Versandgewicht: 0.045kg
- Versandhöhe: 10mm
- Versandbreite: 97mm
- Versandlänge: 104mm
Artikel-Nr.: 100005379
Herst.-Nr.: 5MDAS301
Härtete Stahlunterlegscheiben sorgen für eine präzise Passform und die korrekte Ausrichtung von Flash Suppressors, Mündungsbremsen und Kompensatoren. Die grosse (dicke) Unterlegscheibe ermöglicht 90° Drehung und kann als Abstandshalter für Läufe ohne Ausschnitt hinter den Gewinden verwendet werden. Mittlere Unterlegscheiben fügen etwa 45° Drehung hinzu. Kleine Unterlegscheiben, die mit grossen und mittleren Unterlegscheiben verwendet werden, bieten kleinere Drehwinkel für eine fein abgestimmte, kritische Ausrichtung.Inexpensive, answer to 'clocking' brakes 10.01.2015
Replaced a factory attached brake with an aftermarket counterpart (M11 American Defense). Had a nice selection of sizes, but could have used one or two additional wafer-thin pieces.
The ID was perfect for the threads; the OD was very close to the barrel spec OD. There was however a tiny bit of OD size difference between the thin shims and the main 'spacer' style shim which made installation a bit touchy to get it symmetrical.
The set placed me just short of ideal, requiring me to 'plane' the main spacer (120 grit on plate glass) to shave off enough material to get an exact line-up at 12 o'clock. Simple, but a bit time consuming. The shims are bright steel, so they are quite noticeable, but, actually attractive as they set-off the brake.
Allowed proper position with crushwasher 01.02.2014
This shim set allowed for the correct timing (positioning)and tensioning of a A2 FS on my precison rifle using a crush washer.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.