Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Plus...
Original Mil Spec chambre brosses
Militaire original design, M16, avec filetage de 8-36 pour enfiler direct dans le « nettoyage Rod, armes de petit calibre », ou AR-15, 8-32 fileté pour s'adapter à des tiges standards. AR-10 nettoie la plus grande chambre.308 utilisé sur ces fusils. Soies bronze digne de chambre, plus longue, inox touffes propre verrouillage patte évidements.
Fiche : M16 - RSN 1005-00-999-1435, a fil militaire 8-36. Conforme aux spécifications Mil : MIL-B - 20100C. AR-15 et AR-10 ont 8-32 filetage standard. M16 et AR-15 sont 37/8"(9,8 cm) globale. AR-10, 4 3/8 po (11,2 cm).
Plus...
Évaluations client de BROWNELLS AR-15/M16 CHAMBER BRUSH 8-36M THREADS
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 4.8
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.
Référence: 084116016 BROWNELLS AR-15/M16 CHAMBER BRUSH 8-36M THREADS Militaire original design, M16, avec filetage de 8-36 pour enfiler direct dans le « nettoyage Rod, armes de petit calibre », ou AR-15, 8-32 fileté pour s'adapter à des tiges standards. AR-10 nettoie la plus grande chambre.308 utilisé sur ces fusils. Soies bronze digne de chambre, plus longue, inox touffes propre verrouillage patte évidements.
16.9CHF471CHF 16.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 084116015 BROWNELLS AR-15/M16 CHAMBER BRUSH 8-32M THREADS Ref Fabricant: MR140660050806111424 Militaire original design, M16, avec filetage de 8-36 pour enfiler direct dans le « nettoyage Rod, armes de petit calibre », ou AR-15, 8-32 fileté pour s'adapter à des tiges standards. AR-10 nettoie la plus grande chambre.308 utilisé sur ces fusils. Soies bronze digne de chambre, plus longue, inox touffes propre verrouillage patte évidements.
13.9CHF154CHF 13.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 084116025 BROWNELLS AR-10/AR-308 CHAMBER BRUSH 8-32M THREADS Militaire original design, M16, avec filetage de 8-36 pour enfiler direct dans le « nettoyage Rod, armes de petit calibre », ou AR-15, 8-32 fileté pour s'adapter à des tiges standards. AR-10 nettoie la plus grande chambre.308 utilisé sur ces fusils. Soies bronze digne de chambre, plus longue, inox touffes propre verrouillage patte évidements.
12.9CHF831CHF 12.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Plus...
Original Mil Spec chambre brosses
Militaire original design, M16, avec filetage de 8-36 pour enfiler direct dans le « nettoyage Rod, armes de petit calibre », ou AR-15, 8-32 fileté pour s'adapter à des tiges standards. AR-10 nettoie la plus grande chambre.308 utilisé sur ces fusils. Soies bronze digne de chambre, plus longue, inox touffes propre verrouillage patte évidements.
Fiche : M16 - RSN 1005-00-999-1435, a fil militaire 8-36. Conforme aux spécifications Mil : MIL-B - 20100C. AR-15 et AR-10 ont 8-32 filetage standard. M16 et AR-15 sont 37/8"(9,8 cm) globale. AR-10, 4 3/8 po (11,2 cm).
Plus...
Évaluations client de BROWNELLS AR-15/M16 CHAMBER BRUSH 8-36M THREADS
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 4.8
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.