High-quality springs provide smoother action function and operation, plus reduce felt trigger pull. Coil springs are slightly reduced in diameter to eliminate guide rod spring bind. Colt hammer spring is narrowed along the sides, maintains strength and reduces cocking effort, trigger spring is durable wire-type.
SPECS:Spring steel. Colt SAA - Hammer and trigger springs.Fits Colt and clones. Ruger Blackhawk/Vaquero - Hammer and trigger springs.
Plus...
Alléger la détente & lisse Action Cyclisme
Ressorts de haute qualité offrent la fonction d'action plus lisse et le fonctionnement, ainsient que réduisent l'appui sur la détente de feutre. Ressorts hélicoïdaux ont été légèrement réduites de diamètre afin d'éliminer les lier de ressort tige guide. Ressort de marteau de Colt est réduite sur les côtés, maintient la résistance et réduit l'effort de l'armement, ressort de gâchette est fil-type durable.
Spécifications : acier à ressort. Colt SAA - marteau et détente des ressorts.S'adapte Colt et des clones. Ruger Blackhawk/Vaquero - marteau et détente des ressorts.
Plus...
Évaluations client de LEES GUNSMITHING COLT SAA SPRING KIT
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Excellent product!(18.11.2011)
I installed a set of Wolff springs in my Uberti Cattleman, then installed this set of Lee Gunslinger springs. I wanted to see which I liked the best. The Lee Gunslinger springs are much better in my humble opinion; noticeably easier cocking and also more consistent hammer resistance throughout its arc of travel while cocking. The Lee Gunslinger springs are my choice. I did have to use my Dremel tool to grind a small bit of metal off of the end of the spring at the hammer end for the spring to work well without binding up, but that was very minor work and the end result is a spring that I consider superior to the Wolff spring.
Works with Pietta guns(30.11.2013)
I bought this kit and installed it in a Pietta 1873 it made the hammer real easy to work and the trigger pull was dropped by 1 lbs, I bought a Pietta 1851 navy cap and ball revolver and found out it had the same hammer spring in it as the 1873 so I got another kit for it, now both of them are much better.
too light(04.02.2014)
The spring is too light. It miss fires, even with Federal primers. I have two Uberti .45LC 1873 SAA.
Référence: 100000509 LEES GUNSMITHING COLT SAA SPRING KIT Ref Fabricant: NONE Ressorts de haute qualité offrent la fonction d'action plus lisse et le fonctionnement, ainsient que réduisent l'appui sur la détente de feutre. Ressorts hélicoïdaux ont été légèrement réduites de diamètre afin d'éliminer les lier de ressort tige guide. Ressort de marteau de Colt est réduite sur les côtés, maintient la résistance et réduit l'effort de l'armement, ressort de gâchette est fil-type durable.
41.9CHF3CHF 41.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
High-quality springs provide smoother action function and operation, plus reduce felt trigger pull. Coil springs are slightly reduced in diameter to eliminate guide rod spring bind. Colt hammer spring is narrowed along the sides, maintains strength and reduces cocking effort, trigger spring is durable wire-type.
SPECS:Spring steel. Colt SAA - Hammer and trigger springs.Fits Colt and clones. Ruger Blackhawk/Vaquero - Hammer and trigger springs.
Plus...
Alléger la détente & lisse Action Cyclisme
Ressorts de haute qualité offrent la fonction d'action plus lisse et le fonctionnement, ainsient que réduisent l'appui sur la détente de feutre. Ressorts hélicoïdaux ont été légèrement réduites de diamètre afin d'éliminer les lier de ressort tige guide. Ressort de marteau de Colt est réduite sur les côtés, maintient la résistance et réduit l'effort de l'armement, ressort de gâchette est fil-type durable.
Spécifications : acier à ressort. Colt SAA - marteau et détente des ressorts.S'adapte Colt et des clones. Ruger Blackhawk/Vaquero - marteau et détente des ressorts.
Plus...
Évaluations client de LEES GUNSMITHING COLT SAA SPRING KIT
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Excellent product!(18.11.2011)
I installed a set of Wolff springs in my Uberti Cattleman, then installed this set of Lee Gunslinger springs. I wanted to see which I liked the best. The Lee Gunslinger springs are much better in my humble opinion; noticeably easier cocking and also more consistent hammer resistance throughout its arc of travel while cocking. The Lee Gunslinger springs are my choice. I did have to use my Dremel tool to grind a small bit of metal off of the end of the spring at the hammer end for the spring to work well without binding up, but that was very minor work and the end result is a spring that I consider superior to the Wolff spring.
Works with Pietta guns(30.11.2013)
I bought this kit and installed it in a Pietta 1873 it made the hammer real easy to work and the trigger pull was dropped by 1 lbs, I bought a Pietta 1851 navy cap and ball revolver and found out it had the same hammer spring in it as the 1873 so I got another kit for it, now both of them are much better.
too light(04.02.2014)
The spring is too light. It miss fires, even with Federal primers. I have two Uberti .45LC 1873 SAA.