Cushioned handle has 22 ball bearings inside for effortless rotation so the patch always follows the rifling. Full-length epoxy coating on spring steel rod is impervious to solvents. Index dots on the handle let you check twist rates. 6mm BR rod gives an exact fit to 6mm benchrest, varmint, and hunting rifles.
Poignée coussinée a 22 roulements à billes à l'intérieur pour une rotation sans effort pour le patch suive toujours les rayures. Revêtement époxy pleine longueur sur tige d'acier à ressort est insensible aux solvants. Points d'indice sur la poignée vous permettent de vérifier le taux de torsion. tige de 6mm BR donne un ajustement exact à benchrest 6mm, chasse aux nuisibles et fusils de chasse.
FICHE
: 8-32 filetage femelle. 17. Cal. et.20 Cal. tiges ont filetages femelles 5-40. Les poignées sont 11 ⁄ 8"(2,9 cm) de diamètre, 5" (12,7 cm) de long.
Plus...
Évaluations client de BORE TECH 6MM BR 44"
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Epoxy Coating Comes Off In Use(11.08.2009)
I bought this .22 caliber rod and used it very briefly and liked it so much I bought 4 more in calibers ranging from .17-7mm. After about a year of use in benchrest shooting and only with a high quality bore guide to help in keeping the rod in alignment with the bore; the expoxy coating started coming off everywhere on the rod. In other words the coating didn't come off due to scratching or scraping but just started delaminating itself from the steel. I first noticed it when I brushed the barrel and the black epoxy stuck to the brush. I use Butch's Bore Shine and Copper Killer products exclusively and don't know if this is why, but these rods have since all been sent back to Brownells even though 2 or 3 of them have not yet seen any real use. The .20 caliber rod had started to do the same thing near the tip. I thought these would be great but don't want any pieces of epoxy in my barrels as that can't be good.
GREAT ROD(23.12.2009)
Rod works very well. I own several in various calibers. I do know that Bore Tech has recently changed their coating to an extremely scratch and chemical resistant coating. I have used Butches on this new coating without a problem. Stopped using Butches as soon as I tried Bore Tech Eliminator. Talk about an impressive chemical that doesn't stink!!!!
Great cleaning rod!(24.03.2011)
I've been using this rod for a while on my AR's and it has held up well. No issues with the coating. The bearings in the handle spin like nothing I've uesd before!
Référence: 509000009 BORE TECH 6MM BR 44" Ref Fabricant: BSTX-6644-00667739966443 Poignée coussinée a 22 roulements à billes à l'intérieur pour une rotation sans effort pour le patch suive toujours les rayures. Revêtement époxy pleine longueur sur tige d'acier à ressort est insensible aux solvants. Points d'indice sur la poignée vous permettent de vérifier le taux de torsion. tige de 6mm BR donne un ajustement exact à benchrest 6mm, chasse aux nuisibles et fusils de chasse.
144.9CHF5CHF 144.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Calibre: 243/6 mm (.243)Longueur: 44Matériaux: Epoxy CoatedStyle: Carabine
Référence: 509000007 BORE TECH .22 CAL. 36" Ref Fabricant: BSTX-2236-00667739922364 Poignée coussinée a 22 roulements à billes à l'intérieur pour une rotation sans effort pour le patch suive toujours les rayures. Revêtement époxy pleine longueur sur tige d'acier à ressort est insensible aux solvants. Points d'indice sur la poignée vous permettent de vérifier le taux de torsion. tige de 6mm BR donne un ajustement exact à benchrest 6mm, chasse aux nuisibles et fusils de chasse.
144.9CHF18CHF 144.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 509000008 BORE TECH .22 CAL. 44" Ref Fabricant: BSTX-2244-00667739922449 Poignée coussinée a 22 roulements à billes à l'intérieur pour une rotation sans effort pour le patch suive toujours les rayures. Revêtement époxy pleine longueur sur tige d'acier à ressort est insensible aux solvants. Points d'indice sur la poignée vous permettent de vérifier le taux de torsion. tige de 6mm BR donne un ajustement exact à benchrest 6mm, chasse aux nuisibles et fusils de chasse.
144.9CHF2CHF 144.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 509000011 BORE TECH 7MM-30 CAL. 44" Ref Fabricant: BSTX-7344-00667739973441 Poignée coussinée a 22 roulements à billes à l'intérieur pour une rotation sans effort pour le patch suive toujours les rayures. Revêtement époxy pleine longueur sur tige d'acier à ressort est insensible aux solvants. Points d'indice sur la poignée vous permettent de vérifier le taux de torsion. tige de 6mm BR donne un ajustement exact à benchrest 6mm, chasse aux nuisibles et fusils de chasse.
144.9CHF8CHF 144.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 509000010 BORE TECH 7MM-30 CAL. 36" Ref Fabricant: BSTX-7336-00667739973366 Poignée coussinée a 22 roulements à billes à l'intérieur pour une rotation sans effort pour le patch suive toujours les rayures. Revêtement époxy pleine longueur sur tige d'acier à ressort est insensible aux solvants. Points d'indice sur la poignée vous permettent de vérifier le taux de torsion. tige de 6mm BR donne un ajustement exact à benchrest 6mm, chasse aux nuisibles et fusils de chasse.
144.9CHF0CHF 144.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Cushioned handle has 22 ball bearings inside for effortless rotation so the patch always follows the rifling. Full-length epoxy coating on spring steel rod is impervious to solvents. Index dots on the handle let you check twist rates. 6mm BR rod gives an exact fit to 6mm benchrest, varmint, and hunting rifles.
Poignée coussinée a 22 roulements à billes à l'intérieur pour une rotation sans effort pour le patch suive toujours les rayures. Revêtement époxy pleine longueur sur tige d'acier à ressort est insensible aux solvants. Points d'indice sur la poignée vous permettent de vérifier le taux de torsion. tige de 6mm BR donne un ajustement exact à benchrest 6mm, chasse aux nuisibles et fusils de chasse.
FICHE
: 8-32 filetage femelle. 17. Cal. et.20 Cal. tiges ont filetages femelles 5-40. Les poignées sont 11 ⁄ 8"(2,9 cm) de diamètre, 5" (12,7 cm) de long.
Plus...
Évaluations client de BORE TECH 6MM BR 44"
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Epoxy Coating Comes Off In Use(11.08.2009)
I bought this .22 caliber rod and used it very briefly and liked it so much I bought 4 more in calibers ranging from .17-7mm. After about a year of use in benchrest shooting and only with a high quality bore guide to help in keeping the rod in alignment with the bore; the expoxy coating started coming off everywhere on the rod. In other words the coating didn't come off due to scratching or scraping but just started delaminating itself from the steel. I first noticed it when I brushed the barrel and the black epoxy stuck to the brush. I use Butch's Bore Shine and Copper Killer products exclusively and don't know if this is why, but these rods have since all been sent back to Brownells even though 2 or 3 of them have not yet seen any real use. The .20 caliber rod had started to do the same thing near the tip. I thought these would be great but don't want any pieces of epoxy in my barrels as that can't be good.
GREAT ROD(23.12.2009)
Rod works very well. I own several in various calibers. I do know that Bore Tech has recently changed their coating to an extremely scratch and chemical resistant coating. I have used Butches on this new coating without a problem. Stopped using Butches as soon as I tried Bore Tech Eliminator. Talk about an impressive chemical that doesn't stink!!!!
Great cleaning rod!(24.03.2011)
I've been using this rod for a while on my AR's and it has held up well. No issues with the coating. The bearings in the handle spin like nothing I've uesd before!