Exclusive, rubber O-Ring gently centers the jag and patch in the muzzle, and all the way through the bore, to help prevent muzzle damage. Pointed, brass jag firmly holds all types of patches for efficient swabbing during cleaning. 12 gauge, 8 - 32 fits standard rifle cleaning rod. 12 gauge, 5/16"- 27 fits standard shotgun cleaning rod.
SPECS: Brass, 1½" (3.8cm) long, All are 8 - 32 thread except 12 gauge 5/16"- 27.
Plus...
Joint torique en caoutchouc protège la Couronne des dommages
Exclusif, joint torique en caoutchouc centres doucement la jag et le patch dans la bouche et tout au long de l'alésage, pour aider à prévenir les dommages du museau. Pointé, jag laiton maintient fermement tous les types de patchs pour un écouvillonnage efficace pendant le nettoyage. calibre 12, 8-32 pour standard fusil tige de nettoyage. calibre 12, 5/16"-27 correspond à fusil standard tige de nettoyage. Remplacement joints toriques - chaque paquet contient 12 joints toriques.
Spécifications : laiton, 1½ po (3,8 cm) de long, sont tous 8-32 fil sauf calibre 12 5/16"-27.
Plus...
Évaluations client de ACCUPRO .375/380 CALIBER PRO JAG
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3.5
Awesome!(12.09.2010)
I really like this jag. The fit and finish is perfect and the o-ring really helps to get all the crud out of the rifling. The .45 was the first one I ordered, but I will be completing all the calibers I shoot with this jag. A+
Does not fit bore(28.03.2011)
This jag is beautifully machined and nicely conceived in concept but it simply is too large to fit down a .45 cold forged hexagonally-rifled bore with standard properly-sized cotton patches. I measured it and it was a full .050 larger in OD than my other previously-used jags that were a nice snug fit in this caliber.
Simply put, it requires major lathe work to get it to carry a patch down the bore.
Too big and too small(30.03.2013)
I bought this Jag for my 1911 in .45ACP. The end of the Jag is actually too small for a patch to have a snug fit through the barrel. When the patch gets over the o-ring it's too big to pass through the barrel. You have to cut the patch down so it's short of the o-ring.
An excellent jag.....(25.06.2010)
I am a benchrest shooter, I have been using these jags for over 10 years. I like the way these jags ride the o ring down the bore & keep the brass from contacting the lands. I'm glad you carry these, after Accupro went out of business I wasn't sure I would be able to find them. Now I get a few every chance I get so I won't run out in the future.....
Référence: 745022375 ACCUPRO .375/380 CALIBER PRO JAG Ref Fabricant: 22375CS757883223759 Exclusif, joint torique en caoutchouc centres doucement la jag et le patch dans la bouche et tout au long de l'alésage, pour aider à prévenir les dommages du museau. Pointé, jag laiton maintient fermement tous les types de patchs pour un écouvillonnage efficace pendant le nettoyage. calibre 12, 8-32 pour standard fusil tige de nettoyage. calibre 12, 5/16"-27 correspond à fusil standard tige de nettoyage. Remplacement joints toriques - chaque paquet contient 12 joints toriques.
18.9CHF31CHF 18.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 745000010 ACCUPRO .50 CAL. PRO JAG Ref Fabricant: 22500 Exclusif, joint torique en caoutchouc centres doucement la jag et le patch dans la bouche et tout au long de l'alésage, pour aider à prévenir les dommages du museau. Pointé, jag laiton maintient fermement tous les types de patchs pour un écouvillonnage efficace pendant le nettoyage. calibre 12, 8-32 pour standard fusil tige de nettoyage. calibre 12, 5/16"-27 correspond à fusil standard tige de nettoyage. Remplacement joints toriques - chaque paquet contient 12 joints toriques.
19.9CHF48CHF 19.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 745022270 ACCUPRO .270/7MM CALIBER PRO JAG Ref Fabricant: 22277757883222707 Exclusif, joint torique en caoutchouc centres doucement la jag et le patch dans la bouche et tout au long de l'alésage, pour aider à prévenir les dommages du museau. Pointé, jag laiton maintient fermement tous les types de patchs pour un écouvillonnage efficace pendant le nettoyage. calibre 12, 8-32 pour standard fusil tige de nettoyage. calibre 12, 5/16"-27 correspond à fusil standard tige de nettoyage. Remplacement joints toriques - chaque paquet contient 12 joints toriques.
19.9CHF28CHF 19.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Exclusive, rubber O-Ring gently centers the jag and patch in the muzzle, and all the way through the bore, to help prevent muzzle damage. Pointed, brass jag firmly holds all types of patches for efficient swabbing during cleaning. 12 gauge, 8 - 32 fits standard rifle cleaning rod. 12 gauge, 5/16"- 27 fits standard shotgun cleaning rod.
SPECS: Brass, 1½" (3.8cm) long, All are 8 - 32 thread except 12 gauge 5/16"- 27.
Plus...
Joint torique en caoutchouc protège la Couronne des dommages
Exclusif, joint torique en caoutchouc centres doucement la jag et le patch dans la bouche et tout au long de l'alésage, pour aider à prévenir les dommages du museau. Pointé, jag laiton maintient fermement tous les types de patchs pour un écouvillonnage efficace pendant le nettoyage. calibre 12, 8-32 pour standard fusil tige de nettoyage. calibre 12, 5/16"-27 correspond à fusil standard tige de nettoyage. Remplacement joints toriques - chaque paquet contient 12 joints toriques.
Spécifications : laiton, 1½ po (3,8 cm) de long, sont tous 8-32 fil sauf calibre 12 5/16"-27.
Plus...
Évaluations client de ACCUPRO .375/380 CALIBER PRO JAG
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 3.5
Awesome!(12.09.2010)
I really like this jag. The fit and finish is perfect and the o-ring really helps to get all the crud out of the rifling. The .45 was the first one I ordered, but I will be completing all the calibers I shoot with this jag. A+
Does not fit bore(28.03.2011)
This jag is beautifully machined and nicely conceived in concept but it simply is too large to fit down a .45 cold forged hexagonally-rifled bore with standard properly-sized cotton patches. I measured it and it was a full .050 larger in OD than my other previously-used jags that were a nice snug fit in this caliber.
Simply put, it requires major lathe work to get it to carry a patch down the bore.
Too big and too small(30.03.2013)
I bought this Jag for my 1911 in .45ACP. The end of the Jag is actually too small for a patch to have a snug fit through the barrel. When the patch gets over the o-ring it's too big to pass through the barrel. You have to cut the patch down so it's short of the o-ring.
An excellent jag.....(25.06.2010)
I am a benchrest shooter, I have been using these jags for over 10 years. I like the way these jags ride the o ring down the bore & keep the brass from contacting the lands. I'm glad you carry these, after Accupro went out of business I wasn't sure I would be able to find them. Now I get a few every chance I get so I won't run out in the future.....