When a standard AR-15 is converted to .22lr through a conversion bolt or replacement upper, the bolt catch stops working. Magazines that hold the bolt open after the last round are a good stopgap but it doesn't offer the same functionality as a standard AR and most ranges won't let you leave an empty magazine in your rifle in order to keep the bolt open and show that it's clear. This is where the Catch22 V1 comes in. The Catch22 V1 is a direct replacement for your standard bolt catch and will work with most common .22lr conversions. To install, just punch out the bolt catch roll pin and replace the stock .223 catch with the Catch22. PLEASE NOTE: The Catch22 is not backwards compatible with .223 bolts. The bolt catch is compatible with CMMG, RTB, Spike's Tactical, and Tactical Solutions dedicated upper receivers and conversion bolts, as well as similar Ceiner kit conversion bolts. For the bolt catch to provide true last-round-hold-open, the magazine that is used needs to have a follower that sticks out of the back and will engage the bolt catch after the last round. Because of this, different magazines will offer different last round functionality. - CMMG / Black Dog ""Standard"" (X-form, Sonic Weld, etc.): These magazines have a follower that sticks up after the last round is fired, but it doesn't reach out of thee back which is required to hit the bolt catch. The bolt catch will need to be manually engaged to hold the bolt back after the magazine is removed. - S&W 15-22: These magazines have a follower that can hit the bolt catch consistently after the last round is fired and are the best way to get last-round-hold-open functionality. These magazines need to be shimmed using a Catch22 clip-on adapter to take up the slack in the magwell as they are slimmer than a standard AR magazine.
Améliore ton AR-15 avec le Catch22 V1 !
Lorsque tu convertis un AR-15 standard en .22lr via un bolt de conversion ou un upper de remplacement, le bolt catch cesse de fonctionner. Les chargeurs qui maintiennent le bolt ouvert après la dernière cartouche sont une solution temporaire, mais ils n'offrent pas la même fonctionnalité qu'un AR standard. De plus, la plupart des stands de tir ne te permettront pas de laisser un chargeur vide dans ton fusil pour garder le bolt ouvert et montrer qu'il est clair.
C'est là que le Catch22 V1 entre en jeu. Le Catch22 V1 est un remplacement direct pour ton bolt catch standard et fonctionnera avec la plupart des conversions .22lr courantes. Pour l'installer, il te suffit de retirer la goupille de maintien du bolt catch et de remplacer le catch .223 d'origine par le Catch22.
REMARQUE : Le Catch22 n'est pas compatible avec les bolts .223. Le bolt catch est compatible avec les upper receivers et bolts de conversion de CMMG, RTB, Spike's Tactical et Tactical Solutions, ainsi qu'avec des bolts de conversion similaires des kits Ceiner.
Pour que le bolt catch offre une véritable fonctionnalité de dernier coup maintenu ouvert, le chargeur utilisé doit avoir un follower qui dépasse à l'arrière et qui engagera le bolt catch après la dernière cartouche. En raison de cela, différents chargeurs offriront différentes fonctionnalités de dernier coup.
- CMMG / Black Dog "Standard" (X-form, Sonic Weld, etc.) : Ces chargeurs ont un follower qui dépasse après le dernier tir, mais il ne sort pas à l'arrière, ce qui est nécessaire pour toucher le bolt catch. Le bolt catch devra être engagé manuellement pour maintenir le bolt en arrière après le retrait du chargeur.
- S&W 15-22 : Ces chargeurs ont un follower qui peut toucher le bolt catch de manière cohérente après le dernier tir et sont le meilleur moyen d'obtenir la fonctionnalité de dernier coup maintenu ouvert. Ces chargeurs doivent être shimmés à l'aide d'un adaptateur clip-on Catch22 pour combler le vide dans le magwell, car ils sont plus fins qu'un chargeur AR standard.