The Strike Industries Extended Magazine Plate for GLOCK™ G19 (9mm) was designed to provide smoother magazine reloading through a low drag/no snag design while maintaining maximum magazine capacity with any OEM Double Stack GLOCK™ magazine for G19. The Extended Magazine Plate (EMP) provides an additional +5 rounds to any G19 GLOCK™ magazine. Included is our special steel locking plate, which compared to other magazine extensions on the market, features a hook design which adds extra locking security to increase reliability when fully loaded with rounds. WARNING: DO NOT OVERTIGHTEN set screw when installing the steel locking plate. Steel locking plate may appear "loose" however when the set screw is flush with the back of the EMP body, you do not have to tighten any more. Overtightening from this point on will potentially damage your product. See instructional video for proper installation of item. If you are unsure, please contact our customer support team or consult with your local gunsmith. Package includes: 1x Magazine Plate Extension for GLOCK™ G19 1x Extended length spring 1x Steel locking plate 1x Steel locking plate set screw Features: Plus 5 round capacity for 9mm Low drag/No snag design Impact-resistant polymer Includes Locking steel plate COMPATIBILITY: SI EMP Pocket Clip NOT COMPATIBLE: G23 (.40 Cal) 10-round magazines SI Grip Plug Tool For GLOCK™ for GEN3 or GEN4&5 NOTE: Not for sale to California residents due to 10-round state laws. The checkout process will show NO shipping method available. COMPATIBILITY: For GLOCK™ factory OEM G19 double stack magazines ETS Magazines that are over 10 rounds. Please note we cannot control or even be aware if ETS ever changes their design and the SI EMP no longer is compatible Magwell: tested to work with SI Magwell, Magpul and JP Enterprises It is the responsibility of the customer to know and abide with local gun laws. DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Améliore ton expérience de tir avec le chargeur étendu pour GLOCK®19 !
Le Chargeur Étendu Strike Industries pour GLOCK™ G19 (9mm) a été conçu pour offrir un rechargement de magazine plus fluide grâce à un design à faible résistance et sans accrochage, tout en maintenant une capacité maximale avec n'importe quel magazine GLOCK™ à double pile d'origine pour G19. Cet Extension de Chargeur Étendu (EMP) ajoute 5 cartouches supplémentaires à n'importe quel magazine GLOCK™ G19.
Inclus, tu trouveras notre plaque de verrouillage en acier spéciale, qui, comparée aux autres extensions de magazine sur le marché, présente un design en crochet ajoutant une sécurité de verrouillage supplémentaire pour augmenter la fiabilité lorsque le magazine est complètement chargé.
Avertissement : NE PAS SERRER TROP VITE la vis de réglage lors de l'installation de la plaque de verrouillage en acier. La plaque de verrouillage en acier peut sembler "lâche", mais lorsque la vis de réglage est affleurante avec l'arrière du corps de l'EMP, il n'est pas nécessaire de serrer davantage. Un serrage excessif à partir de ce point pourrait endommager ton produit. Consulte la vidéo d'instruction pour une installation correcte de l'article. Si tu as des doutes, n'hésite pas à contacter notre équipe de support client ou à consulter ton armurier local.
Le paquet comprend :
- 1x Extension de Plaque de Chargeur pour GLOCK™ G19
- 1x Ressort de longueur étendue
- 1x Plaque de verrouillage en acier
- 1x Vis de réglage pour la plaque de verrouillage en acier
Caractéristiques :
- Capacité supplémentaire de 5 cartouches pour 9mm
- Design à faible résistance et sans accrochage
- Polymer résistant aux chocs
- Comprend une plaque de verrouillage en acier
COMPATIBILITÉ :
- Compatible avec les magazines GLOCK™ d'origine à double pile G19
- Magazines ETS de plus de 10 cartouches. Note que nous ne pouvons pas contrôler ni être au courant si ETS change un jour leur design et que l'EMP ne soit plus compatible.
- Magwell : testé pour fonctionner avec le Magwell SI, Magpul et JP Enterprises
Il est de la responsabilité du client de connaître et de respecter les lois locales sur les armes à feu.
AVIS DE NON-RESPONSABILITÉ :
- Ce produit n'est pas fabriqué, autorisé, approuvé ou garanti par GLOCK. GLOCK ne garantit ni ne représente que ce produit est compatible avec les pistolets GLOCK.
- “GLOCK” est une marque déposée au niveau fédéral de GLOCK, Inc. et fait partie des nombreuses marques détenues par GLOCK, Inc. et GLOCK Ges.m.b.H. Ni Strike Industries Inc. ni ce site ne sont affiliés de quelque manière que ce soit, ou autrement approuvés par, GLOCK, Inc. ou GLOCK Ges.m.b.H. L'utilisation de “GLOCK” sur cette page est simplement destinée à faire la publicité de la vente de pistolets, pièces ou composants GLOCK.
- Avertissement sur la Proposition 65 de Californie : Ce produit contient des produits chimiques connus de l'État de Californie pour causer le cancer et des malformations congénitales ou d'autres dommages reproductifs. Pour plus d'informations : www.P65Warnings.ca.gov