The entry into JP’s D2 Series gas block lineup. These ultra-minimized designs will fit under most any hand guard on the market while adding negligible weight to the barrel. The D2 Series features a redesigned forward-facing adjustment that avoids any access interference with hand guards. This new adjustment design is also excellent and shedding dirt and fouling while doubling the adjustment clicks per rotation to provide extremely fine gas control. The two-piece design allows for easier installations even on barrels with pin-and-weld muzzle treatments. Features: Slim Profile Design: The D2 Series boasts a streamlined profile, purpose-built to fit cleanly beneath even the slimmest profile hand guards with top rail, such as our M-LOK Series. Short Journal Optimized: Shorter dimensions cater to shorter gas block journals such as those on Proof Barrels, ensuring a superior fit. Enhanced Dirt Tolerance: The exterior detent mechanism on the nut enhances dirt and carbon tolerance while the robust 5/32 drive also allows for heavier torque to overcome and easily eject fouling. Minute Adjustment Refinement: With 52 clicks between full open and full close, the D2 Series doubles the adjustment clicks of our current detent blocks, making them ideal for SBRs and other high-pressure/short-dwell-time barrels. Versatile Adjustment Options: The adjustment nut features a 5/32 hex drive and slots, providing flexibility for customization with a range of tools, including screwdrivers and knives. Lightweight Design: The D2 Series add negligible weight at just 2.5 oz. Specifications: Barrel Diameter: .750/.875 Material: 416 stainless Finish: Black Weight: 1.73 oz. to 1.76 oz. Length: 1.5" Height: 1.24" – 1.33” (overall), .79" - .81” (over bore) Width: 1.17" – 1.29” Attachment: 6-32 x 3/8" socket head screws (includes 5/64 x 5/16 roll pin for gas tube installation) Adjustment: 5/32 hex or screw driver
Découvre le système de gaz ajustable D2 Series de J P Enterprises !
Voici l'entrée dans la gamme de blocs de gaz D2 de JP. Ces conceptions ultra-minimisées s'adaptent sous presque tous les garde-mains du marché tout en ajoutant un poids négligeable au canon.
Caractéristiques :
- Design profil mince : La série D2 se vante d'un profil épuré, conçu pour s'adapter proprement sous même les garde-mains les plus fins avec rail supérieur, comme notre série M-LOK.
- Optimisé pour un journal court : Des dimensions plus courtes s'adaptent aux journaux de blocs de gaz plus courts, comme ceux des Proof Barrels, garantissant un ajustement supérieur.
- Tolérance accrue à la saleté : Le mécanisme de détent extérieur sur l'écrou améliore la tolérance à la saleté et au carbone, tandis que le robuste entraînement 5/32 permet également un couple plus élevé pour surmonter et éjecter facilement les résidus.
- Affinage d'ajustement minute : Avec 52 clics entre complètement ouvert et complètement fermé, la série D2 double les clics d'ajustement de nos blocs de détent actuels, les rendant idéaux pour les SBR et autres canons à haute pression/temps de séjour court.
- Options d'ajustement polyvalentes : L'écrou d'ajustement dispose d'un entraînement hexagonal de 5/32 et de fentes, offrant une flexibilité pour la personnalisation avec une gamme d'outils, y compris des tournevis et des couteaux.
- Design léger : La série D2 ajoute un poids négligeable à seulement 2,5 oz.
Spécifications :
- Diamètre du canon : .750/.875
- Matériau : Acier inoxydable 416
- Finition : Noir
- Poids : 1.73 oz à 1.76 oz
- Longueur : 1.5"
- Hauteur : 1.24" – 1.33” (au total), .79" - .81” (au-dessus du trou)
- Largeur : 1.17" – 1.29”
- Fixation : Vis à tête hexagonale 6-32 x 3/8"
- (comprend une goupille de 5/64 x 5/16 pour l'installation du tube de gaz)
- Ajustement : 5/32 hex ou tournevis