Specialized Jaws Help You Get the Most from Your Brownells Bench Vise Jaw inserts slip over the factory jaws of your Brownells Gunsmith's Bench Vise and let you customize your vise for specific projects and types of workpieces. They are faced with different types of material that aid in gripping parts securely, while minimizing risk of damaging or scratching them. The insert bodies made of lightweight yet strong aluminum and are held in place on the vise by powerful rare-earth magnets. The aluminum material prevents the magnets from magnetizing steel parts held in the jaws. Prism Soft Jaws - Polyurethane prism jaw inserts are designed for securely clamping delicate round and oval workpieces without risk of damaging them. "Prism"-shaped cutouts of various sizes in the polyurethane help position the workpieces securely. The soft polyurethane face that is extremely flexible yet resistant to deforming or taking a permanent "set." Once pressure is removed, they will return to their original shape. This material also will not harden with age. Checkered Soft Jaws - These polyurethane jaw inserts have a unique "checkering" pattern on the gripping surfaces to hold delicate small parts without damaging them. The soft polyurethane face is extremely flexible yet resistant to deforming or taking a permanent "set." This material also will not harden with age. Prism Aluminum Jaws - These inserts have a hardness factor between that of copper and lead and are designed for securely clamping round/oval items in the Brownells Bench Vise. One horizontal prism-shaped cutout and three different vertical prisms are designed for securely clamping round or oval workpieces. The 90° cutout in the upper part of these jaws is designed for horizontal clamping of flat material. Grooved Aluminum Jaws - Help you securely clamp cylindrical work pieces in your Brownells vise. Six horizontal grooves hold workpieces securely in place, while a deeper center groove anchors bolts, rods, pins, and other cylindrical parts securely while you work on them. With a hardness factor between that of copper and lead, these jaws are naturally much softer than any steel item they will grasp, so you won't mar the work piece. Fiber Jaws - The dense fibrous material on the faces of these jaws securely holds finely machined or polished parts. The fibers will not mar the polished surface. The dense layers of fiber are heat-resistant and will not deform when clamping warm workpieces. Rubber Jaws - Designed specifically for holding very delicate wood and plastic parts, as well as thin-walled tubes, these jaw have a soft, synthetic rubber facing for gently holding fragile workpieces that can withstand only very light clamping force. The rubber material is backed by three layers of canvas, which counteracts the springy tendencies of the rubber and provides enough stiffness to hold the part securely. Felt Jaws - These jaw inserts have a felt face that is designed for clamping extremely delicate workpieces. The special abrasion-resistive felt material conforms closely the contours of the workpiece, so minimal clamping force is needed to hold the piece in place. Even the most delicate workpieces can be anchored without damaging them. Replacement Factory Steel Jaws - These are the same steel jaws that came installed on your Brownells Gunsmith's Bench Vise when it was new. Over time, the original jaws may become worn or damaged. They are easily replaced by simply removing the two bolts securing each jaw and replacing them with these. The bolts are inserted from the exterior of the jaw body, making them easier to install and less likely to be damaged. Like the originals, these jaws have both a smooth face and a "checkered" textured face. Use the side that works best for the project at hand.
Optimise ton établi avec les mâchoires interchangeables Brownells !
Les mâchoires spécialisées t'aideront à tirer le meilleur parti de ton étau de serrurier Brownells. Les inserts de mâchoires glissent sur les mâchoires d'origine de ton étau et te permettent de personnaliser ton outil pour des projets spécifiques et différents types de pièces à travailler.
Ces inserts sont fabriqués à partir de matériaux variés pour assurer une prise sécurisée des pièces tout en minimisant le risque de dommages ou de rayures. Les corps des inserts sont en aluminium léger mais robuste, maintenus en place par de puissants aimants en terres rares. Le matériau en aluminium empêche les aimants de magnétiser les pièces en acier maintenues dans les mâchoires.
Différents types de mâchoires :
- Mâchoires souples Prism - Inserts en polyuréthane conçus pour maintenir fermement des pièces rondes et ovales délicates sans risque de les endommager.
- Mâchoires souples à motif quadrillé - Ces inserts ont un motif unique sur les surfaces de préhension pour tenir de petites pièces délicates sans les abîmer.
- Mâchoires en aluminium Prism - Conçues pour le serrage sécurisé d'objets ronds/ovales, avec des découpes en forme de prisme pour un maintien optimal.
- Mâchoires en aluminium rainurées - Aident à maintenir les pièces cylindriques en place, avec des rainures horizontales et un groove central plus profond pour ancrer les boulons et autres pièces cylindriques.
- Mâchoires en fibre - Matériau dense qui tient fermement les pièces usinées ou polies sans les rayer.
- Mâchoires en caoutchouc - Spécialement conçues pour les pièces en bois et plastique très délicates, avec une face en caoutchouc synthétique douce.
- Mâchoires en feutre - Conçues pour maintenir des pièces extrêmement délicates, le feutre résistant à l'abrasion s'adapte parfaitement aux contours de la pièce.
- Mâchoires en acier de remplacement - Les mêmes mâchoires en acier qui étaient installées sur ton étau Brownells à l'origine, faciles à remplacer.
Chaque type de mâchoire est conçu pour répondre à des besoins spécifiques, te permettant de travailler avec précision et sécurité. Que tu sois un professionnel ou un amateur, ces mâchoires interchangeables sont un excellent ajout à ton atelier.