Points forts
- Ébavurage des bords tranchants
- Chargement rapide des cylindres
- Alignement interchangeable des pilotes
Caractéristiques
- Calibre: 475 Caliber (.475)
- Degré: 45
- Matériaux: Steel
- Poids du colis: 0.243kg
- UPC: 050806013476
Le prix inclut la TVA mais pas la livraison .
Référence: 080948481
050806013476 Le cutter de chanfrein à 45° casse les arêtes des rayures pour une sortie de balle propre ou chanfreine les bouches des chambres de cylindre de revolver pour des recharges rapides. Comprend le cutter, une poignée et un pilote, le tout dans une boîte en polypropylène. Le pilote interchangeable maintient le cutter correctement aligné. Achetez des pilotes supplémentaires pour utiliser un cutter avec de nombreux calibres différents. Des pilotes pour d'autres calibres sont disponibles séparément. Le cutter à 45° fourni dans les ensembles marqués d'un * a un diamètre de 5/8" pour chanfreiner correctement les plus grandes bouches de canon et de cylindre sur ces calibres. Tous les autres ensembles ont un cutter de ½" de diamètre et à 45°.Sélectionnez l'un des éléments suivants pour d'autres outils de chanfreinage et de face pour canons de fusil/pistolet.
Should work, but doesn't 06.06.2016
I've ordered 79 degree and 90 degree cutter from Brownell's, and have had great success with them. But for whatever reason, I've had no luck with 45 degree cutter. I literally cannot get it to cut in any way whatsoever, either by hand or drill press. The Allen screw to hold the pilot stripped on the first use as well, making it impossible to secure the pilot to the cutter. I have no idea how but 45 degree cutter is not in the same league as the other two I've bought.
Perfect fit for Ruger rimfire barrels 30.03.2016
Called the Brownells tech and asked what size I should get for my 10/22 Ruger. They couldn't tell me from experience and suggested I slug my barrel. (you want the largest that will fit to eliminate chatter) Brownells offers 3 sizes for the 22 rimfire, .210, .211 and this .215. Not knowing which size, I tried every round object I had on hand and finally came up with a screw shank that mic'd exactly .215-perfect! So that's what I ordered. It only took maybe 3 revolutions total to get the bevel I was looking for. Oiled it up well, a couple light turns (could feel it cutting), pulled it out, cleared the chips with spray degreaser, re-oiled and one last LIGHT pass did it!
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.