Large, 4" Diameter, Useable Surface Will Not Embed Or Mar
Extra size and weight helps keep these blocks where you put them and the big face eliminates much of the “balancing act” when you’re driving pins. Cannot mar even the most highly polished surface. Two different models. Green - For rifles and shotguns; drilled with four through holes for easier pin removal and disassembly. Convenient, center “V” holds cylindrically shaped parts steady so they won’t roll. Blue - For revolvers and pistols. Larger through holes and partial “V” holds pistol barrels for easier link pin installation and removal. Can be drilled or modified with hand tools; will not melt when machined.
SPECS: Polyethylene, green or blue. 4" (10cm) diameter, 1-1⁄8" (2.8cm) high.
Plus...
Grand, 4" de diamètre, Surface utile ne sera pas incorporer ou Mar
Extra taille et le poids permet de garder ces blocs où vous les mettez et le gros visage élimine une grande partie de la « équilibriste » quand vous êtes au volant d'épingles. Ne peut pas mar même la surface plus polie. Deux modèles différents. Vert - pour les carabines et les fusils de chasse ; percée de quatre trous pour enlèvement de broche plus facile pour le démontage. Commode, Centre « V » détient cylindrique morceaux de forme régulière donc ils ne roulent pas. Bleu - pour revolvers et pistolets. Plus gros trous et partielle « V » cales barils de pistolet pour pose de broche de lien facile et l'enlèvement. Peut être percé ou modifiées avec main outils ; ne va pas fondre quand usiné.
SPECS : polyéthylène, vert ou bleu. 4"(10cm) de diamètre, 1-1 ⁄ 8" (2,8 cm) de haut.
Plus...
Évaluations client de BROWNELLS PISTOL BENCH BLOCK
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.8
Hamd bench tool(18.11.2009)
Any time I had to drive a pin I had to find a hole in my work bench to allow the pin to drop into. With this inexpensive little gem, I not only have the hole, but I also have a vee notch to steady the firearm. Works like a charm. well worth the money even if you only need it once.
Great item(20.11.2009)
greatly eases the process of removing a variety of pins from the frames of numerous types of handguns. keeps you from maring the frame on the table when removing the pins.
Very useful(02.05.2011)
This block is great for a number of gunsmithing jobs. I use it often. Its very durable and wont mar the finish on your guns
Versatile block(09.02.2015)
Since I had this block, goodbye to all those wood blocks that I could just find around when doing gunsmithing. I love the holes for the pins to drop and the channel across this block which secures barrels, slides during repair our punching out pins.
Mainspring housing woes? Get this!(04.05.2016)
Disassembling a 1911 mainspring housing with lanyard loop is a snap with this block. Position the housing so it doesn't move with loop down in a hole, press down (hard, always) and remove the retainer pin. Avoid the dreaded vice claws and don't be afraid to clean out your housing and replace the spring. Of course, I also use the block for anything that needs to be punched out. Armorer's plates are great but $$$. I consider this a versatile tool at a value price.
Invaluable tool(16.09.2009)
This tool makes driving pins in and out a piece of cake. Any repair kit is incomplete without a good bench block, and this is a very good bench block.
A must for any bench(08.11.2009)
This thing can take a beating. Perfect for driving out pins and you can drill it easily to make custom jig.
It really won't mar either.
wow(21.11.2009)
I can't believe I've gotten along without one for so long! Easily modified to meet your individual needs.
Must have rifle tool(07.03.2012)
Great product, prevents marring your rifle while working on it. Great if you're putting together your own lowers.
Just what the Doctor Ordered(12.06.2015)
The best bench block for all your rifle needs very durable, you can't go wrong with this item.
Large and Versitle for Rifles(14.09.2015)
I used this block immediately upon delivery to install a different AR15 fire control group. This block is very large with good sized through holes to drive a varitey of pins. I think the V channel will also be excellent for laying a Ruger MKII/III barrel on when tapping in those uncooperative bolt retention/mainspring packs. Definitely a must have along with a gunsmithing hammer with plastic/delrin and brass faces. A big roll of duct tape has always worked for me, but I like the V channel of this block that gives it some more versatility. I'll be grabbing this block instead of the duct tape roll now.
Works Fine(17.05.2016)
Worked fine with my AR15. But before I used it, I sanded down the edges of the center channel since it was still a little rough, and also to make the edges more "curved" instead it's sharp angle.
When I removed the pin from my FSB, some of the black phosphate finish rubbed off. I'll apply some electrical tape on the edges next time I use it.
Référence: 080000493 BROWNELLS PISTOL BENCH BLOCK Ref Fabricant: NONE Extra taille et le poids permet de garder ces blocs où vous les mettez et le gros visage élimine une grande partie de la « équilibriste » quand vous êtes au volant d'épingles. Ne peut pas mar même la surface plus polie. Deux modèles différents. Vert - pour les carabines et les fusils de chasse ; percée de quatre trous pour enlèvement de broche plus facile pour le démontage. Commode, Centre « V » détient cylindrique morceaux de forme régulière donc ils ne roulent pas. Bleu - pour revolvers et pistolets. Plus gros trous et partielle « V » cales barils de pistolet pour pose de broche de lien facile et l'enlèvement. Peut être percé ou modifiées avec main outils ; ne va pas fondre quand usiné.
54.9CHF471CHF 54.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Manufacture: Universel Arme de Poing
Manufacture:
Universel Arme de Poing
Poids du colis: 0.249kgHauteur d'expédition: 36mmLargeur d'expédition: 99mmLongueur d'expédition: 99mm
Détails de l'article
Fabriqué au USA
Référence: 080000492 BROWNELLS RIFLE BENCH BLOCK Ref Fabricant: NONE Extra taille et le poids permet de garder ces blocs où vous les mettez et le gros visage élimine une grande partie de la « équilibriste » quand vous êtes au volant d'épingles. Ne peut pas mar même la surface plus polie. Deux modèles différents. Vert - pour les carabines et les fusils de chasse ; percée de quatre trous pour enlèvement de broche plus facile pour le démontage. Commode, Centre « V » détient cylindrique morceaux de forme régulière donc ils ne roulent pas. Bleu - pour revolvers et pistolets. Plus gros trous et partielle « V » cales barils de pistolet pour pose de broche de lien facile et l'enlèvement. Peut être percé ou modifiées avec main outils ; ne va pas fondre quand usiné.
54.9CHF178CHF 54.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Large, 4" Diameter, Useable Surface Will Not Embed Or Mar
Extra size and weight helps keep these blocks where you put them and the big face eliminates much of the “balancing act” when you’re driving pins. Cannot mar even the most highly polished surface. Two different models. Green - For rifles and shotguns; drilled with four through holes for easier pin removal and disassembly. Convenient, center “V” holds cylindrically shaped parts steady so they won’t roll. Blue - For revolvers and pistols. Larger through holes and partial “V” holds pistol barrels for easier link pin installation and removal. Can be drilled or modified with hand tools; will not melt when machined.
SPECS: Polyethylene, green or blue. 4" (10cm) diameter, 1-1⁄8" (2.8cm) high.
Plus...
Grand, 4" de diamètre, Surface utile ne sera pas incorporer ou Mar
Extra taille et le poids permet de garder ces blocs où vous les mettez et le gros visage élimine une grande partie de la « équilibriste » quand vous êtes au volant d'épingles. Ne peut pas mar même la surface plus polie. Deux modèles différents. Vert - pour les carabines et les fusils de chasse ; percée de quatre trous pour enlèvement de broche plus facile pour le démontage. Commode, Centre « V » détient cylindrique morceaux de forme régulière donc ils ne roulent pas. Bleu - pour revolvers et pistolets. Plus gros trous et partielle « V » cales barils de pistolet pour pose de broche de lien facile et l'enlèvement. Peut être percé ou modifiées avec main outils ; ne va pas fondre quand usiné.
SPECS : polyéthylène, vert ou bleu. 4"(10cm) de diamètre, 1-1 ⁄ 8" (2,8 cm) de haut.
Plus...
Évaluations client de BROWNELLS PISTOL BENCH BLOCK
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.8
Hamd bench tool(18.11.2009)
Any time I had to drive a pin I had to find a hole in my work bench to allow the pin to drop into. With this inexpensive little gem, I not only have the hole, but I also have a vee notch to steady the firearm. Works like a charm. well worth the money even if you only need it once.
Great item(20.11.2009)
greatly eases the process of removing a variety of pins from the frames of numerous types of handguns. keeps you from maring the frame on the table when removing the pins.
Very useful(02.05.2011)
This block is great for a number of gunsmithing jobs. I use it often. Its very durable and wont mar the finish on your guns
Versatile block(09.02.2015)
Since I had this block, goodbye to all those wood blocks that I could just find around when doing gunsmithing. I love the holes for the pins to drop and the channel across this block which secures barrels, slides during repair our punching out pins.
Mainspring housing woes? Get this!(04.05.2016)
Disassembling a 1911 mainspring housing with lanyard loop is a snap with this block. Position the housing so it doesn't move with loop down in a hole, press down (hard, always) and remove the retainer pin. Avoid the dreaded vice claws and don't be afraid to clean out your housing and replace the spring. Of course, I also use the block for anything that needs to be punched out. Armorer's plates are great but $$$. I consider this a versatile tool at a value price.
Invaluable tool(16.09.2009)
This tool makes driving pins in and out a piece of cake. Any repair kit is incomplete without a good bench block, and this is a very good bench block.
A must for any bench(08.11.2009)
This thing can take a beating. Perfect for driving out pins and you can drill it easily to make custom jig.
It really won't mar either.
wow(21.11.2009)
I can't believe I've gotten along without one for so long! Easily modified to meet your individual needs.
Must have rifle tool(07.03.2012)
Great product, prevents marring your rifle while working on it. Great if you're putting together your own lowers.
Just what the Doctor Ordered(12.06.2015)
The best bench block for all your rifle needs very durable, you can't go wrong with this item.
Large and Versitle for Rifles(14.09.2015)
I used this block immediately upon delivery to install a different AR15 fire control group. This block is very large with good sized through holes to drive a varitey of pins. I think the V channel will also be excellent for laying a Ruger MKII/III barrel on when tapping in those uncooperative bolt retention/mainspring packs. Definitely a must have along with a gunsmithing hammer with plastic/delrin and brass faces. A big roll of duct tape has always worked for me, but I like the V channel of this block that gives it some more versatility. I'll be grabbing this block instead of the duct tape roll now.
Works Fine(17.05.2016)
Worked fine with my AR15. But before I used it, I sanded down the edges of the center channel since it was still a little rough, and also to make the edges more "curved" instead it's sharp angle.
When I removed the pin from my FSB, some of the black phosphate finish rubbed off. I'll apply some electrical tape on the edges next time I use it.