Caractéristiques
- Calibre:
17 Caliber
- Poids du colis: 0.159kg
- Hauteur d'expédition: 41mm
- Largeur d'expédition: 30mm
- Longueur d'expédition: 84mm
- UPC: 050806111158
17 Caliber
Le prix inclut la TVA mais pas la livraison .
Référence: 749011715
050806111158 Nos dies expandeurs de génération II capturent complètement le mandrin à l'intérieur du die, de sorte que le mandrin ne peut pas se retirer. Un O-ring dans le capuchon du die permet au mandrin de flotter un peu et de trouver son propre centre à l'intérieur du col de douille. Les trois dies de génération II sont usinés avec précision en acier inoxydable et les dies de 7/8 pouce - 14 incluent l'anneau de verrouillage fendu en acier inoxydable Sinclair. Les dies expandeurs de gros calibre acceptent uniquement les mandrins de calibre 35 à 50. Tous les mandrins expandeurs pour les corps expandeurs Sinclair sont vendus séparément : Trouvez des mandrins ici.Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Le prix inclut la TVA mais pas la livraison .
Les Generation II Expander Dies de SINCLAIR INTERNATIONAL sont conçus pour capturer complètement le mandrin à l'intérieur du die, empêchant ainsi tout retrait accidentel. Grâce à un O-ring dans le capuchon du die, le mandrin peut légèrement flotter et trouver son propre centre à l'intérieur du col de la douille.
Note que tous les mandrins pour les corps expandeurs Sinclair sont vendus séparément. Trouve les mandrins ici.
17 Caliber
Why did I wait so long 16.07.2018
Insert your desired arbor into the die and screw it into your press , while not over-tightening the cap to allow for a small amount of "float" for the arbor pin . I tried both Imperial Die Lube , and Imperial Dry Lube , and found the Dry Lube worked much better , and gave a smoother extraction of the arbor from the case . Since I shoot both F-Open , and F-TR , I go thru a lot of cases in a month , and this tool saves a lot of time , and improves concentricity to a standard of .0010-.0015 . Easy to set-up , easy to use , and worth every penny . Only wish I had purchased one three years ago . Nothing negative to say about this product . This tool , properly used will improve accuracy , Period !
Works great! 10.10.2016
I purchased this expander die to improve neck uniformity with my .308 and .223 brass for target and competitions. The die is well made and easy to adjust. Under the cap is an o-ring which allows for some expander float. This helps the expander self-align and improves concentricity. I have used it with carbide and HSS expanders and recommend using lube for either. Imperial wax or a lanolin based spray work well.
Best of all it works with my PMA carbide and HSS expanding mandrels!
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.