Snap caps are great for dry fire practice because they let you concentrate on keeping the firearm steady during the trigger pull, which helps eliminate flinch when using live ammo. Solid aluminum Rimfire snap caps protect the breech face and will last for hundreds of "shots".
SPECS: Aluminum body, fits .22 LR rifles and pistols.
Plus...
Tir à sec sans endommager votre arme à feu
Snap caps sont idéales pour la pratique de tir à sec parce qu'ils vous permettent de se concentrer sur le maintien de l'arme à feu constant au cours de la détente, qui aide à élimine flinch lors de l'utilisation de munitions direct. Casquettes de composant logiciel enfichable de Rimfire en aluminium massif protègent le visage de la culasse et durent pendant des centaines de « coups ».
Caractéristiques : corps en aluminium, s'adapte.22 LR fusils et pistolets.
Plus...
Évaluations client de CARLSONS RIMFIRE SNAP CAPS .22 LONG RIFLE, ALUMINUM
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.3
Description Not Accurate(14.01.2013)
It is "NOT" spring loaded as listed in the description. It appears to be solid aluminum. When I dried fired one in my Ruger 22/45 the firing pin left a noticeable dent in it that one would see in a fired 22 rimfire case. We will see how it holds up with repeated dry fires. I am disappointed that Brownells blindly copied what the maker listed on the package without checking them.
Works as expected(22.01.2013)
Since you can't spring-load a rimfire snap cap, these work just fine. Yes, the firing pin leaves a dent, turn the cap a bit and try again until the rim is fully dented. I believe it is still effective even though the rim of the cap is fully dented. The point is to prevent denting the barrel edge and these do that just fine.
Of course, you can also use a fired .22 case for the same effect. It's just harder to chamber.
BOO!(20.02.2015)
I am a a gunsmith. I don't want holes in my walls (or me) when I work on 22's. I bought these SPECIFICALLY for action proving, feeding, dry fire. The FIRST time I used them was great, cycled through the feeding tube, ejected (yay, I fixed it). The SECOND time, no go. (Here is where you learn from my experience). Feeding issues. They "disappeared". They were stuck in the feeding tube and the spring wouldn't push them past the little bump inside. Oh, old, weak spring, stretched it little, nope. Well, this guy never cleaned his gun, maybe it is gunked up, disassembled the entire feeding mechanism, cleaned, lightly buffed appropriate areas, nope. They are getting stuck near the elbow of the feeding tube. Checked the set screw to be sure it wasn't protruding, nope. Is the elbow bent or damaged, nope... couple hours after starting this quest I discovered that the dummy rounds rims were deformed just enough (from the dry fire that they were bought for) that they no longer would go through the elbow... tried several new live rounds and viola, they flew through like the had somewhere to be... GRR!
Référence: 155000211 CARLSONS RIMFIRE SNAP CAPS .22 LONG RIFLE, ALUMINUM Ref Fabricant: 00056723189000561 Snap caps sont idéales pour la pratique de tir à sec parce qu'ils vous permettent de se concentrer sur le maintien de l'arme à feu constant au cours de la détente, qui aide à élimine flinch lors de l'utilisation de munitions direct. Casquettes de composant logiciel enfichable de Rimfire en aluminium massif protègent le visage de la culasse et durent pendant des centaines de « coups ».
22.9CHF176CHF 22.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Snap caps are great for dry fire practice because they let you concentrate on keeping the firearm steady during the trigger pull, which helps eliminate flinch when using live ammo. Solid aluminum Rimfire snap caps protect the breech face and will last for hundreds of "shots".
SPECS: Aluminum body, fits .22 LR rifles and pistols.
Plus...
Tir à sec sans endommager votre arme à feu
Snap caps sont idéales pour la pratique de tir à sec parce qu'ils vous permettent de se concentrer sur le maintien de l'arme à feu constant au cours de la détente, qui aide à élimine flinch lors de l'utilisation de munitions direct. Casquettes de composant logiciel enfichable de Rimfire en aluminium massif protègent le visage de la culasse et durent pendant des centaines de « coups ».
Caractéristiques : corps en aluminium, s'adapte.22 LR fusils et pistolets.
Plus...
Évaluations client de CARLSONS RIMFIRE SNAP CAPS .22 LONG RIFLE, ALUMINUM
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.3
Description Not Accurate(14.01.2013)
It is "NOT" spring loaded as listed in the description. It appears to be solid aluminum. When I dried fired one in my Ruger 22/45 the firing pin left a noticeable dent in it that one would see in a fired 22 rimfire case. We will see how it holds up with repeated dry fires. I am disappointed that Brownells blindly copied what the maker listed on the package without checking them.
Works as expected(22.01.2013)
Since you can't spring-load a rimfire snap cap, these work just fine. Yes, the firing pin leaves a dent, turn the cap a bit and try again until the rim is fully dented. I believe it is still effective even though the rim of the cap is fully dented. The point is to prevent denting the barrel edge and these do that just fine.
Of course, you can also use a fired .22 case for the same effect. It's just harder to chamber.
BOO!(20.02.2015)
I am a a gunsmith. I don't want holes in my walls (or me) when I work on 22's. I bought these SPECIFICALLY for action proving, feeding, dry fire. The FIRST time I used them was great, cycled through the feeding tube, ejected (yay, I fixed it). The SECOND time, no go. (Here is where you learn from my experience). Feeding issues. They "disappeared". They were stuck in the feeding tube and the spring wouldn't push them past the little bump inside. Oh, old, weak spring, stretched it little, nope. Well, this guy never cleaned his gun, maybe it is gunked up, disassembled the entire feeding mechanism, cleaned, lightly buffed appropriate areas, nope. They are getting stuck near the elbow of the feeding tube. Checked the set screw to be sure it wasn't protruding, nope. Is the elbow bent or damaged, nope... couple hours after starting this quest I discovered that the dummy rounds rims were deformed just enough (from the dry fire that they were bought for) that they no longer would go through the elbow... tried several new live rounds and viola, they flew through like the had somewhere to be... GRR!