Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
076683372147 749014041
Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
23.9 23.9 1 CHF
Référence: 749014041
RCBS X-DIE MANDREL ASSEMBLY .223 REM
Ref Fabricant: 37214 076683372147 Tailler le cas une fois — jamais couper à nouveau ! Le X-Sizer Die ressemble à un ordinaire pleine longueur Sizer Die. A l'intérieur, la filière dispose d'un mandrin spécialement conçu avec une boule de l'expanseur et capsulage goupille attachée. Le mandrin est ce que le X-Die ® est tout au sujet. La matrice de X-Sizer breveté élimine le besoin de répété tailler après une initiale de la garniture de. 020" au large la longueur maximale du carter de normaliser le cas. Le X-Die ne Raccourcissez la longueur de l'affaire : le mandrin réduit le taux de croissance que l'affaire se développe à la suite de l'affaire bouche-contacter le mandrin au cours de dimensionnement. En raison d'une tolérance extrêmement étroite entre le mur de cou mandrin et meurent, le mur du cou de l'affaire ne pas épaissir comme la longueur du carter est repoussée. Cas de taille à plusieurs reprises dans le dé-X seront initialement pousser quelques millièmes de pouce, puis stabiliser inférieure à la longueur maximale du carter sans perte perceptible de précision ou affaire.
23.9 CHF 0 CHF 23.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Calibre: 223 Remington

Caractéristiques

Calibre: 223 Remington Poids du colis: 0.041kg Hauteur d'expédition: 19mm Largeur d'expédition: 51mm Longueur d'expédition: 102mm

Détails de l'article

Fabriqué au USA



Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
Newsletter