Features: Six position AR-15/M16/M4 receiver extension assembly Includes Mil-Spec receiver extension/buffer tube, receiver lock plate, lock-nut/castle nut, carbine buffer and carbine buffer spring Buffer tube is Mil-Spec diameter and 6061 aluminum Carbine buffer weight is 3 oz Buffer spring is 17-7 stainless steel
Fits standard AR-15/M16 lower receivers. Mil-spec diameter. Includes buffer tube, lock plate, castle nut, buffer and buffer spring.
Plus...
Caractéristiques : Position Six AR-15/M16/M4 receveur extension tube de rallonge/tampon de réception comprend Mil-Spec, récepteur verrouiller plaque, écrou de blocage-écrou/château, tampon de carabine, carabine tampon printemps tube de tampon est diamètre de Mil-Spec et 6061 aluminium carabine tampon pèse 3 oz butoir ressort est en acier inoxydable 17-7
S'adapte à des récepteurs inférieurs AR-15/M16 standard. Diamètre de mil-spec. Inclut le tube de tampon, plaque de verrouillage, écrou crénelé, tampon et butoir ressort.
Plus...
Évaluations client de BROWNELLS M4 MIL-SPEC BUFFER TUBE ASSEMBLY
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4.7
Pretty Good Product(17.06.2013)
Very easy product to install.
Good Quality(19.06.2013)
Easy installation. Good Product
Excellent fit and finish(10.08.2013)
The buffer tube has a very clean flat black finish was perfect with no defects. The receiver lock plate and castle nut have a good finish also. Comes with 3 oz carbine buffer and carbine buffer spring. Good quality product.
Exactly what I needed.(29.11.2013)
Excelent finish, no marks or blemishes, fits perfect. Not much more to say.
Good Fit(07.02.2014)
Went together very easy with no issues. I used it with the Magpul FCS fixed carbine stock when converting from A2 stock
Amazing Value(31.05.2015)
The fit was absolutely perfect, and the finish is flawless. Truly amazing quality for the price.
Okay product(26.06.2016)
The product is a basic mil spec kit which is what I wanted but my only concerns are four of the position holes have I small hole all the way through instead of a blind hole. Granted they are small holes that get covered by the stock but of all the kits I've done this is the first. Also the end plate does not fit flush to the receiver, I tried my fathers novinski to verify it wasn't my lower out of spec but it is definitely the plate. Again I don't think it will be a problem and I plan to switch it out later anyway. All in all, doesn't seem to be as good fit and finish as others but when on sale, the price out weighs the cons.
Can't complain, exactly what I needed(22.05.2017)
Not really much to say, does it's job and doesn't break the bank. Worth getting.
It's 6061 Not Mil Spec(13.06.2017)
I didn't know that it was 6061, and bought it without reading. When I installed it, end plate, ruined the threads; when I went to twist the buffer tube on. That was my fault for holding the end plate, but I torqued the castle nut on, and didn't feel any wobble. However the worst thing about this, was the part that covers the buffer retainer wore away. When I opened my AR one day, the retainer popped up into my face. Now the Rifle isn't safe to shoot, and I've replaced it with an actual Milspec 7075 buffer tube.
I needed one of these kits to finish up assembling an ar15 lower. The fit in finish was perfect for my stripped Ruger lower and I had no problems with the installation and functionality. The Magpul Mil-spec stock I already had fit perfectly with no extra play or slop. I would buy another one of these kits.
Référence: 080001039 BROWNELLS M4 MIL-SPEC BUFFER TUBE ASSEMBLY Ref Fabricant: NONE050806110830 Caractéristiques : Position Six AR-15/M16/M4 receveur extension tube de rallonge/tampon de réception comprend Mil-Spec, récepteur verrouiller plaque, écrou de blocage-écrou/château, tampon de carabine, carabine tampon printemps tube de tampon est diamètre de Mil-Spec et 6061 aluminium carabine tampon pèse 3 oz butoir ressort est en acier inoxydable 17-7
79.9CHF144CHF 79.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Features: Six position AR-15/M16/M4 receiver extension assembly Includes Mil-Spec receiver extension/buffer tube, receiver lock plate, lock-nut/castle nut, carbine buffer and carbine buffer spring Buffer tube is Mil-Spec diameter and 6061 aluminum Carbine buffer weight is 3 oz Buffer spring is 17-7 stainless steel
Fits standard AR-15/M16 lower receivers. Mil-spec diameter. Includes buffer tube, lock plate, castle nut, buffer and buffer spring.
Plus...
Caractéristiques : Position Six AR-15/M16/M4 receveur extension tube de rallonge/tampon de réception comprend Mil-Spec, récepteur verrouiller plaque, écrou de blocage-écrou/château, tampon de carabine, carabine tampon printemps tube de tampon est diamètre de Mil-Spec et 6061 aluminium carabine tampon pèse 3 oz butoir ressort est en acier inoxydable 17-7
S'adapte à des récepteurs inférieurs AR-15/M16 standard. Diamètre de mil-spec. Inclut le tube de tampon, plaque de verrouillage, écrou crénelé, tampon et butoir ressort.
Plus...
Évaluations client de BROWNELLS M4 MIL-SPEC BUFFER TUBE ASSEMBLY
Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 4.7
Pretty Good Product(17.06.2013)
Very easy product to install.
Good Quality(19.06.2013)
Easy installation. Good Product
Excellent fit and finish(10.08.2013)
The buffer tube has a very clean flat black finish was perfect with no defects. The receiver lock plate and castle nut have a good finish also. Comes with 3 oz carbine buffer and carbine buffer spring. Good quality product.
Exactly what I needed.(29.11.2013)
Excelent finish, no marks or blemishes, fits perfect. Not much more to say.
Good Fit(07.02.2014)
Went together very easy with no issues. I used it with the Magpul FCS fixed carbine stock when converting from A2 stock
Amazing Value(31.05.2015)
The fit was absolutely perfect, and the finish is flawless. Truly amazing quality for the price.
Okay product(26.06.2016)
The product is a basic mil spec kit which is what I wanted but my only concerns are four of the position holes have I small hole all the way through instead of a blind hole. Granted they are small holes that get covered by the stock but of all the kits I've done this is the first. Also the end plate does not fit flush to the receiver, I tried my fathers novinski to verify it wasn't my lower out of spec but it is definitely the plate. Again I don't think it will be a problem and I plan to switch it out later anyway. All in all, doesn't seem to be as good fit and finish as others but when on sale, the price out weighs the cons.
Can't complain, exactly what I needed(22.05.2017)
Not really much to say, does it's job and doesn't break the bank. Worth getting.
It's 6061 Not Mil Spec(13.06.2017)
I didn't know that it was 6061, and bought it without reading. When I installed it, end plate, ruined the threads; when I went to twist the buffer tube on. That was my fault for holding the end plate, but I torqued the castle nut on, and didn't feel any wobble. However the worst thing about this, was the part that covers the buffer retainer wore away. When I opened my AR one day, the retainer popped up into my face. Now the Rifle isn't safe to shoot, and I've replaced it with an actual Milspec 7075 buffer tube.
I needed one of these kits to finish up assembling an ar15 lower. The fit in finish was perfect for my stripped Ruger lower and I had no problems with the installation and functionality. The Magpul Mil-spec stock I already had fit perfectly with no extra play or slop. I would buy another one of these kits.