Votre panier est vide.

Panier

VIPER BENCH REST
BARREL VISE

700358214011 100013367

The Viper Barrel Vise is constructed of 6061 aluminum. The bottom half is 1” thick, for added strength, when mounting to your work bench. All four hardened, threaded bolts have a support spring. These springs keep the top half from moving around during barrel insertion and removal. Each spring is fully captured on each end for stability.

SPECS: Base is 7" x 3" with 5 3/4" c-t-c hole spacing for mounting; top plate is 3" square; four 1/2" bolts for clamping; and will accommodate 0.750" to 1" OD barrels.

Plus...

L'étau de baril de Viper est construit en aluminium 6061. Bas 1" d'épais, pour la moitié est ajouté la force, lors du montage de votre banc de travail. Tous les quatre boulons durcies, filetées ont une source de soutien. Ces ressorts maintiennent le dessus la moitié de se déplacer au cours de baril d'insertion et de suppression. Chaque ressort est entièrement capturé à chaque extrémité pour la stabilité.

Spécifications : Base est 7 « x 3 » avec 5 3/4" espacement de trou de c-t-c pour le montage ; plaque supérieure est 3" carrés ; quatre boulons 1/2" pour la volonté et de bridage ; accommodement 0,750 « à 1" OD barils.

Plus...

Évaluations client de VIPER BENCH REST BARREL VISE

Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 5

Great product (13.12.2014)

I have two of these one in the shop and one on a trailer hitch just in case it is needed at the range. Rugged powder coated finish.

Strong and heavy (29.12.2014)

This barrel vise is built strong and heavy. I used it to install a new barrel on a Rem 700 action. The barrel had a taper and I was worried about "shimming" the new barrel in the vise. I didn't have to. The way it is built with the springs and the over-sized holes, it conformed to the taper of the barrel with no problem. I had freshly parkerized the barrel so I wrapped it with a thick piece of paper from a charcoal bag, although, with the soft powder coat that is on this vise, it probably wasn't necessary. I tend to overdo my projects and this is my kind of tool. It is extremely strong and very heavy. Did I mention that it is strong and heavy?

TOP SHELF VICE (30.01.2015)

Bought this after looking at about a dozen vices. Price was no object but I didn't want to use wooden blocks like some other vices recommended. This is a very well made piece of equipment. I have multiple benchrest rifles and dozens of barrels and I wanted a vice that was easy to use, portable, and I wanted a vice that would not mar my barrels. I couldn't be happier with it.

Vipr Vise Review (16.02.2015)

I bought this vise on a lark so to speak as it was 60 bucks, but looked well built for the money. After receiving it I realized it and was more for the shooter who has a custom rifle and removes his barrel on a regular basis. I, on the other hand, work primarily on older military rifles so I had doubts this vise would remove an older milsurp barrel. I decided to try this vise removing a 30-40 Krag barrel off an old 1898 Springfield. I stripped the rifle down and had the barrel off in less than 30 mins!! No fooling around with vise bushings and stuff, just installed the receiver/barrel in the vise tightened the nuts. First attempt the barrel just slightly turned so I thought OK give it some more. I tightened the vise nuts some more and "viola" the receiver came off like a charm. Hopefully it will work the same when I install the new barrel. For right now I am impressed with this $60.00 vise. I didn't have to use any rosin as the powder coating seemed to grip the barrel well enough on its own. Great item for the money....so far.

Rick H.

Used to build a Mauser sporter... (03.09.2015)

Had a Yugo K98 I needed rebarreling. I got one of the cheap 30-06 Brownell's large ring barrels and went to town. My biggest mistake was buying the pull-through reamer from a competitor. It doesn't seem as good as the one's Brownell's sells. Recommend mounting this a bit off the bench (not directly on) to have clearance for pull through reamer handle or whatever.

No scuffs or marks on barrel. Great product. Manufacturer says not to put anything between barrel and vise... Powder coating is enough.

Excellent Barrel Vise (06.07.2016)

I have only used the vise three times so far, but it has worked flawlessly every time. The vise did not twist or marr the finish on any of the barrels. I could not find any recommendations on how many ft. lbs. of torque to put on the nuts of the vise, so I started at 45 ft lbs and that was all it took. I probably could have gone down to 35 ft lbs, but 45 worked so I am sticking with it. One of the guns I was working on was an Ruger Precision Rifle. I read that the barrel nuts could be tough to release, but with this vise it was no problem.

Excellent (31.12.2016)

Used this to remove a barrel on a late model stainless 700 action. Ran the nuts down with a Dewalt then finished with a box wrench on a straighter section of the barrel. I had no slipping problems once I realized I should tighten it way up. I'm now using it all the time for rifle work just to have a stable platform. Working an action out of the stock was always a pain.

Fabulous (13.06.2017)

Right tool for the right job. I used the BV to remove the barrel nut on a Ruger Precision .308, The BV held the barrel in place with no marring, the barrel nut "hard nut to crack, so they say" came off with ease. The stock barrel was replaces with a carbon fiber barrel with no marring during the torquing process. I am totally delighted with the BV.

Great ,Great,Great Vise for the Money! (19.02.2018)

I Dont bother mounting this Vise to my Bench I mount it in one of my Vises mounted to my bench that way if I'm not mounting a barrel its out of the way, also it has never failed me on any barrel removal job its a strong vise once that barrels mounted in it its not going anywhere but on or off that reciever ,I have not found a barrel yet I could not use it on do yourself a favor and toss all the barrel vises with inserts etc or ones that will only take certain barrels off junk them and buy this one for 60 bucks it takes them all off.

It Just Works!!! (03.09.2018)

I needed a barrel vise to install a new Seekins handguard on my Ruger Precision rifle. After looking at several, I settled on this one based on all the reviews and I'm glad I did. Made of steel and iron, it should last a long time. Held the barrel solid as a rock . I was a bit concerned about damaging the finish on the barrel so I wrapped it in a piece of chamois cloth I had laying around and it still held solid. Torqued the bolts to 30 ft lbs and went to work. The red block will jam up on the bolts if you don't loosen the nuts evenly but other than that, it worked like a charm. Love it to pieces!!!

Brilliant design (30.09.2018)

With just some pieces of cardboard box cutouts to prevent scratches, this thing holds on to the barrel like there's no tomorrow.

You don't even need a workbench. I bought two set of 5" long 1/2" nuts, bolts, and washers, and mounted it directly onto a piece of 4x4 lumber.

Using a breaker bar while either standing or sitting on the 4x4, I could remove the most stubbornly installed muzzle brake with ease.

No need for bushings or any of that nonsense, either.

Lire 11 plus d'avis sur brownells.com

124.9 124.9 1 CHF

Référence: 100013367
VIPER BENCH REST BARREL VISE
Ref Fabricant: BV 700358214011 L'étau de baril de Viper est construit en aluminium 6061. Bas 1" d'épais, pour la moitié est ajouté la force, lors du montage de votre banc de travail. Tous les quatre boulons durcies, filetées ont une source de soutien. Ces ressorts maintiennent le dessus la moitié de se déplacer au cours de baril d'insertion et de suppression. Chaque ressort est entièrement capturé à chaque extrémité pour la stabilité.

124.9 CHF 57 CHF 124.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Matériaux: Aluminum

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Matériaux: Aluminum Poids du colis: 1.52kg Hauteur d'expédition: 106mm Largeur d'expédition: 112mm Longueur d'expédition: 220mm

Détails de l'article

Fabriqué au USA

SPECS: Base is 7" x 3" with 5 3/4" c-t-c hole spacing for mounting; top plate is 3" square; four 1/2" bolts for clamping; and will accommodate 0.750" to 1" OD barrels.

Plus...

Évaluations client de VIPER BENCH REST BARREL VISE

Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 5

Great product (13.12.2014)

I have two of these one in the shop and one on a trailer hitch just in case it is needed at the range. Rugged powder coated finish.

Strong and heavy (29.12.2014)

TOP SHELF VICE (30.01.2015)

Vipr Vise Review (16.02.2015)

Used to build a Mauser sporter... (03.09.2015)

Excellent Barrel Vise (06.07.2016)

Excellent (31.12.2016)

Fabulous (13.06.2017)

Great ,Great,Great Vise for the Money! (19.02.2018)

It Just Works!!! (03.09.2018)

Brilliant design (30.09.2018)

Lire 11 plus d'avis sur brownells.com

Poursuivre vos achats

YANKEE HILL MACHINE CO., INC. .725 STANDARD THREAD PROTECTIR 5/8-24 STAINLESS STEEL
.720 STANDARD THREAD PROTECTOR 5/8-24

YANKEE HILL MACHINE CO., INC.

En stock

CHF 25.90 *

Protecteurs Filetage

GHOST EVO ELITE CONNECTOR
EVO ELITE CONNECTOR

GHOST

En stock

CHF 54.90 *

Pièces Connecteur

4.7

LANCER SYSTEMS VIPER BRAKE 6.5 CALIBER 5/8-24 BLACK
VIPER BRAKE 6.5 CALIBER

LANCER SYSTEMS

En stock

CHF 244.90 *

Compensateurs & Freins de Bouche

BERETTA USA 308 WINCHESTER 10 ROUND MAGAZINE
T3X TAC A1/CTR MAGAZINE 308 WIN/6.5 CREEDMOOR/260 REM

BERETTA USA

Récommandé

CHF 139.90 *

Chargeurs | Magazines

INTERNATIONAL BARRELS 6MM CREEDMOOR 1-8" TWIST 26" BARREL
SAVAGE SMALL SHANK PREFIT PRECISION BARRELS

INTERNATIONAL BARRELS

Récommandé

CHF 729.90 * CHF 689.90 - CHF 929.90*

Canons Carabine

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile