Il Carrello è vuoto.

Carrello

0917309915

BROWNELLS
SHOTGUN BUTTSTOCK BOLT BITS

080187201

No Wedge Bits For 3/8" Drive Tools; For Remington 870 & 1100

Self-guiding, sleeved bits fit Remington 870 and 1100 buttstocks perfectly; can't wedge between stock bolt and wood. Use with 6" long 3/8" drive extension and T-handle listed below.

SPECS: 870 is ¾" (19.0mm) diameter x 1½" (3.8cm) long. 1100 is 7/8" (22.2mm) diameter x 1-5/8" (4.1cm) long.

Altro...

Nessun bit di Cuneo per 3/8" auto strumenti; Per Remington 870 & 1100

Auto-guida, a maniche corte punte perfettamente Remington 870 e buttstocks 1100; non è possibile a cuneo tra legno e bullone dipinga. Utilizzare con 6" lungo 3/8" unità di estensione e T-handle elencati di seguito.

Specifiche: 870 è ¾"(19,0 mm) diametro x 1½" (3,8 cm) lungh. 1100 è 7/8"(22,2 mm) di diametro x 1-5/8" (4.1 cm) lungh.

Altro...

Punteggi dei clienti per BROWNELLS 1100 BUTTSTOCK BOLT BIT

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 5

Worth the money (22.10.2016)

I wanted to replace the stock on my 870. To remove the stock bolt I tried screwdrivers, WD40, penetrating oil all to no avail. Bought this bit and the stock bolt came loose in moments. Still required significant effort, but it came loose. just to be sure the bolt bit was the right tool, I tried the screwdriver again before using the bolt bit and the bolt wouldn't budge. Buying this bit actually was a net cost savings to me because the only other option was to cut the stock off and even then there is no guarantee that the remainder of the bolt would have been easy to remove. Buy this bit and simplify your life.

Built tough great tool (30.09.2009)

Had a rusted up Remington 1100 that had broken two other wrenches of less quality, was running through all my normal methods of removing the rusted nut when I spotted this wrench in the catalog so I ordered it up, [...] took it out of the box, put it on a breaker bar and "POP" off came the nut! Great tool!

A "No Brainer" Purchase (02.12.2009)

I was wrestling with various screwdrivers and other Heath Robinson-esque devices to try to get my stuck 11-87 bolt off with zero success. I eventually caved and bought this. The stock was off within 5 seconds of unwrapping the parcel from Brownells. Just get it.

Just Buy It (30.04.2010)

So Here's the story: I have a 1980 model 1100 with a weak and noisy action spring. Additionally the butt stock was loose, could be just that or broken. Sought advise as to the best way to remove the nut and was told about the many different tools to get the job done. Ranging from a wide blade screwdriver to a wood boring bit.

Two things you must have to remove the stock safely and properly: 1. The ability to apply the proper amount of torque, both tightening and loosening. 2. The ability to keep the tool from slipping out of the slot stripping the nut and/or breaking the stock. This tool does both; in fact it is the only tool that does both.

Turns out the stock was just loose and the spring was kinked and worn out. The weekend after fixing my gun, a club buddy asked if I bought this bit. He wanted to borrow it because he had used a screwdriver on his, slipped and took a huge chunk out of the inside of his stock.

" Fantastic piece of equipment " (02.07.2012)

I used this tool to remove an old stubborn disfigured stock nut from my 1100. Proved to be fast, safe and left my stock damage free, I highly suggest this tool as the price for the outcome is " priceless "!

Excellent tool (07.05.2013)

If you own or work on Remington 1100's you must have this tool. Don't risk punching a hole through the stock for the small price of this excellent product. You will never get the bolt tight enough with a screwdriver and the stock will continue to come loose, usually in the middle of a hunting trip or a day shooting clays. Just buy it, it is worth every penny.

Socket Really Works (20.12.2013)

Have been trying all things I have read online to remove bolt. Screw Driver, Lug Wrench PB Blaster. Tried all with no success. Ordered the bit and tried it today. Had a rusted bolt probably from 30 years ago. Put the bit on and had the bolt off in a minute flat. No fuss no problems. If you can turn it with a big screw driver you don't need this. If you can't I would buy this bit. It is cheaper than a gun smith and you have it from now on. Is a bit pricy but have you checked other tool prices lately.
This was for a 70's model 1100 magnum that has been babtized numerous times especially on New Years for the past two years in a row.

Works like a charm! (20.08.2015)

I recently purchased this bit to change the buttstock on my 11-87 LC High Gloss. Ordering was a breeze, customer service was very helpful, and the bit arrived 4 business days after I placed the order. Once the bit arrived, it functioned exactly as expected. I was able to remove the old stock and install the new one with no problems at all. I'd definitely recommend this to anyone who needs to remove the buttstock on a Remington 11-87, and based on this experience, I won't hesitate to order from Brownell's in the future.

Right tool for the job (09.12.2015)

Made short work of removing the butt retaining bolt without fear of damaging my expensive Monte Carlo buttstock. The right tool for job which could save you a lot of money in the long run. Get it and throw it in your maintance kit. You'll need it again if your a regular 1100 shooter.

Buy this tool. (07.05.2018)

Great tool. the only method that worked.

Leggi più recensioni su brownells.com

48.9 54.9 2 CHF

N. prodotto: 080187201
BROWNELLS 1100 BUTTSTOCK BOLT BIT Auto-guida, a maniche corte punte perfettamente Remington 870 e buttstocks 1100; non è possibile a cuneo tra legno e bullone dipinga. Utilizzare con 6" lungo 3/8" unità di estensione e T-handle elencati di seguito.

48.9 CHF 35 CHF 48.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Remington Modello: 1100

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Remington Modello: 1100 Peso della spedizione: 0.068kg Altezza di spedizione: 30mm Larghezza di spedizione: 50mm Lunghezza di spedizione: 60mm

Dettagli dell'elemento

Made in Usa

N. prodotto: 080870201
BROWNELLS REMINGTON 870 BUTTSTOCK BOLT BIT
Parti Fabbricante: 870STOCKBIT Auto-guida, a maniche corte punte perfettamente Remington 870 e buttstocks 1100; non è possibile a cuneo tra legno e bullone dipinga. Utilizzare con 6" lungo 3/8" unità di estensione e T-handle elencati di seguito.

54.9 CHF 0 CHF 54.90 *

In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Remington Modello: 870

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

No Wedge Bits For 3/8" Drive Tools; For Remington 870 & 1100

Self-guiding, sleeved bits fit Remington 870 and 1100 buttstocks perfectly; can't wedge between stock bolt and wood. Use with 6" long 3/8" drive extension and T-handle listed below.

SPECS: 870 is ¾" (19.0mm) diameter x 1½" (3.8cm) long. 1100 is 7/8" (22.2mm) diameter x 1-5/8" (4.1cm) long.

Altro...

Nessun bit di Cuneo per 3/8" auto strumenti; Per Remington 870 & 1100

Specifiche: 870 è ¾"(19,0 mm) diametro x 1½" (3,8 cm) lungh. 1100 è 7/8"(22,2 mm) di diametro x 1-5/8" (4.1 cm) lungh.

Altro...

Punteggi dei clienti per BROWNELLS 1100 BUTTSTOCK BOLT BIT

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 5

Worth the money (22.10.2016)

Built tough great tool (30.09.2009)

A "No Brainer" Purchase (02.12.2009)

Just Buy It (30.04.2010)

" Fantastic piece of equipment " (02.07.2012)

Excellent tool (07.05.2013)

Socket Really Works (20.12.2013)

Works like a charm! (20.08.2015)

Right tool for the job (09.12.2015)

Buy this tool. (07.05.2018)

Great tool. the only method that worked.

Leggi più recensioni su brownells.com

Scelti da altri clientie

MAGTECH AMMUNITION 12 GAUGE BRASS SHOTSHELLS 25/BOX
SHOTSHELL BRASS

MAGTECH AMMUNITION

Riordinato

CHF 49.90 *

Bossoli per canna liscia

MAGPUL AR-15 PMAG GEN M3 MAGAZINE 223/5.56 10RD POLYMER BLACK
AR-15 10RD PMAG GEN M3 MAGAZINE 223/5.56

MAGPUL

In magazzino

CHF 26.90 *

Caricatori | Magazines

4.1

STARLINE 358 WINCHESTER BRASS 100/BAG
358 WINCHESTER BRASS

STARLINE

Riordinato

CHF 99.90 *

Bossoli per carabina

WILSON COMBAT REMINGTON 870 EXTENSION TUBE 2-SHOT 12GA
REMINGTON 870 EXTENSION TUBE 2-SHOT 12GA

WILSON COMBAT

Riordinato

CHF 84.90 *

BROWNELLS MOSSBERG 500 FOREND WRENCH 12 GAUGE
REMINGTON/MOSSBERG FOREND WRENCH

BROWNELLS

In magazzino

CHF 59.90 * CHF 43.90 - CHF 59.90*

Chiavi astina

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.