Non-Marring, Precision-Machined To Fit Common Pin Sizes
For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch Set includes 8 flathead, long shaft punches for driving pins completely out.
Non guastare, precisione-lavorati per adattare le dimensioni comuni di Pin
Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
Punteggi dei clienti per GRACE USA 5/16" (7.9MM) BRASS PIN PUNCH
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4
Excellent Value(16.11.2009)
These are super. I have several sets of the cheaper imported brass punches. The quality of these "Made in USA" punches blew me away. Not only are they nicely finished, they are a joy to use. Also included is a nice pouch so they don't end up scattered in your tool box or on the bench. I would buy these again and would recommend them to a friend.
Much nicer than the "plastic box" sets(27.12.2009)
These are great for gentle removal of pins from historic or surface critical items. The brass is still pretty soft, and bending is possible without care, but the punch is tapered from full diameter down to the pin punch size. The pin punch size is not the full length of the punch, which is good to add strength since the punch is the strike end length for much of the punch, but if it's a long pin, you might have to resort to another punch/method to fully drive the pin all the way the length of the pin.
Comments on the PSA-8 Grass Brass Punch(06.12.2012)
It didn't take long after receiving this items to know I had ordered a very professional punch set and not some piece of junk that would probably fall apart after first use. Having the different sizes which are tailored for hand guns and rifles roll pins would give anyone the capabilities to take down your weapons with ease. Having eight different sizes will definitely afford not having to order a special individual punch. I have already used this item and I can attest to it's usefulness in it's ability to push out roll pins. Each punch is clearly marked to its size and the roll-up kit that holds each in a separate slot. If you're in the market for a good punch set then look no further.
Bends easily, VERY soft(26.03.2013)
I bought these to replace an existing set of brass punches that have had years of use. Upon first use, I bent 2 of these punches with a light blow of a 6 oz nylon hammer to remove handgun pins. Couldn't believe how easy it was to bend them. Even the larger brass punches easily flair and bend at the head.
Good Punch Set(04.09.2014)
I have installed and/or adjusted several dovetailed sights with these and also installed a Majestic Arms quick strip kit and they will continue to get new tasks. Of course they're not as tough as steel punches, but they're my choice for preserving metal while still transferring plenty of a blow; just be careful on the smaller punches (not that steel doesn't bend too). Since they're brass they're also pretty easy to re-shape or cut if the tip does become damaged. The little plastic roll is handy, but sometimes the small punch on the end tries to escape; just watch them if you're working outdoors.
N. prodotto: 354100312 GRACE USA 5/16" (7.9MM) BRASS PIN PUNCH Parti Fabbricante: 516BPP731940225160 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
18.9CHF11CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Dimensioni:
5/16 pollici
Materiale:
Brass
Tipo:
Grace
Peso della spedizione: 0.036kgAltezza di spedizione: 1mmLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 354100000 GRACE USA BRASS PIN PUNCH SET, 8 PC Parti Fabbricante: PS-8731940123800 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
64.9CHF30CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354100062 GRACE USA 1/16" (1.6MM) BRASS PIN PUNCH Parti Fabbricante: 116BPP731940221162 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
16.9CHF4CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354100093 GRACE USA 3/32" (2.4MM) BRASS PIN PUNCH Parti Fabbricante: 332BPP731940223326 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
16.9CHF7CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354100125 GRACE USA 1/8" (3.2MM) BRASS PIN PUNCH Parti Fabbricante: 18BPP731940223180 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
16.9CHF4CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354100156 GRACE USA 5/32" (4MM) BRASS PIN PUNCH Parti Fabbricante: 532BPP731940225320 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
18.9CHF7CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354100187 GRACE USA 3/16" (4.8MM) BRASS PIN PUNCH Parti Fabbricante: 316BPP731940223166 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
18.9CHF8CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354100218 GRACE USA 7/32" (5.3MM) BRASS PIN PUNCH Parti Fabbricante: 732BPP731940227324 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
18.9CHF2CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 354100250 GRACE USA 1/4" (6.4MM) BRASS PIN PUNCH Parti Fabbricante: 14BPP731940223142 Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
17.9CHF10CHF 17.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Non-Marring, Precision-Machined To Fit Common Pin Sizes
For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch Set includes 8 flathead, long shaft punches for driving pins completely out.
Non guastare, precisione-lavorati per adattare le dimensioni comuni di Pin
Per una deriva attrazioni, perni di guida o di parti di marcatura o graffiare la superficie di montaggio può significare la differenza tra un lavoro ben fatto e il disastro. Lavorate da hex premium, ottone. Punch Set comprende 8 a testa piatta, albero lungo i pugni per perni di guida completamente fuori.
Punteggi dei clienti per GRACE USA 5/16" (7.9MM) BRASS PIN PUNCH
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4
Excellent Value(16.11.2009)
These are super. I have several sets of the cheaper imported brass punches. The quality of these "Made in USA" punches blew me away. Not only are they nicely finished, they are a joy to use. Also included is a nice pouch so they don't end up scattered in your tool box or on the bench. I would buy these again and would recommend them to a friend.
Much nicer than the "plastic box" sets(27.12.2009)
These are great for gentle removal of pins from historic or surface critical items. The brass is still pretty soft, and bending is possible without care, but the punch is tapered from full diameter down to the pin punch size. The pin punch size is not the full length of the punch, which is good to add strength since the punch is the strike end length for much of the punch, but if it's a long pin, you might have to resort to another punch/method to fully drive the pin all the way the length of the pin.
Comments on the PSA-8 Grass Brass Punch(06.12.2012)
It didn't take long after receiving this items to know I had ordered a very professional punch set and not some piece of junk that would probably fall apart after first use. Having the different sizes which are tailored for hand guns and rifles roll pins would give anyone the capabilities to take down your weapons with ease. Having eight different sizes will definitely afford not having to order a special individual punch. I have already used this item and I can attest to it's usefulness in it's ability to push out roll pins. Each punch is clearly marked to its size and the roll-up kit that holds each in a separate slot. If you're in the market for a good punch set then look no further.
Bends easily, VERY soft(26.03.2013)
I bought these to replace an existing set of brass punches that have had years of use. Upon first use, I bent 2 of these punches with a light blow of a 6 oz nylon hammer to remove handgun pins. Couldn't believe how easy it was to bend them. Even the larger brass punches easily flair and bend at the head.
Good Punch Set(04.09.2014)
I have installed and/or adjusted several dovetailed sights with these and also installed a Majestic Arms quick strip kit and they will continue to get new tasks. Of course they're not as tough as steel punches, but they're my choice for preserving metal while still transferring plenty of a blow; just be careful on the smaller punches (not that steel doesn't bend too). Since they're brass they're also pretty easy to re-shape or cut if the tip does become damaged. The little plastic roll is handy, but sometimes the small punch on the end tries to escape; just watch them if you're working outdoors.