Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Mount per Trijicon RMR per H&K USP - Precision e Affidabilità
Scopri il montaggio EGW per il tuo Trijicon RMR, progettato per offrire una soluzione sicura e semplice per il tuo H&K USP.
Descrizione del Prodotto
- Materiale: Alluminio 7075
- Rivestimento: Hardcoat Nero Opaco
- Dimensioni:
- Lunghezza Totale: 1.780"
- Larghezza Totale: 1.1"
- Hardware di Montaggio:
- (2) Viti a Testa Piatta 6-32
- (1) Vite di Blocco 6-32 X 3/16
- Compatibilità:
- Adatto per: Baby Desert Eagle (Post 2006), EAA Witness Elite Match
- Non compatibile con: Rock Island 1911s
Per installare il tuo punto rosso Trijicon RMR, rimuovi semplicemente il mirino posteriore della tua arma e sostituiscilo con il nostro montaggio. Non sono necessarie modifiche e puoi rimuovere il montaggio in qualsiasi momento per ripristinare il tuo mirino originale. L'hardware di montaggio è incluso.
Istruzioni per l'Installazione
- Rimuovi il mirino posteriore*
- Installa il montaggio EGW nel dovetail
- Serra la vite di bloccaggio (se applicabile)
- Posiziona il punto rosso sul montaggio EGW (mettere un piccolo pezzo di carta tra il punto rosso e il montaggio faciliterà la rimozione e impedirà al Loctite di contaminare il punto rosso).
- Applica Loctite blu sulle viti di montaggio fornite
- Serra le viti di montaggio a 15in/lbs
Nota: Le viti incluse con questo montaggio richiedono una chiave a brugola 5/64'' per l'installazione.