RBF (Reinforced Buffer retainer, Forward Controls) is a strengthened AR buffer retainer machined with Swiss machines from 17-4 stainless steel bar stock, and heat treated to H900 hardness. RBF features a reinforced tip that is 10% larger (0.102) than TDP spec (0.093). FCD didn’t want RBF to be timed (as the case with a rectangular tip), so RBF retains the TDP buffer retainer's versatile round tip and is installed per TM instructions. 10% is as much as we could increase before encountering receiver extension timing incompatibilities. RBF is compatible with AR15/M16 mil-spec rifle and carbine receiver extensions, as well as Vltor A5 system receiver extensions. 17-4 stainless steel Heat treated AR15 and 308 AR compatible buffer retainer 10% larger diameter tip NOTE: Always wear eye protection while handling springs under pressure, spring loaded pins and detents. RBF isn't a fix for out of spec lowers with incorrectly positioned buffer retainer hole. If you detect excessive wear marks on the buffer's front face, it's advisable to warranty exchange your lower receiver. Receiver extensions (REs) timing on the receiver can vary. While the an RE can rotate past dead center (with the RE covering and retaining the buffer retainer) by 45 degrees or more on one receiver, it might only be able to do 15 degrees or less on another. Also, different REs have different timing values.
Rafforza la tua esperienza di tiro con il Buffer Retainer in Acciaio Inossidabile AR-15
Il RBF (Reinforced Buffer retainer, Forward Controls) è un buffer retainer AR rinforzato, lavorato con macchine svizzere da barre in acciaio inossidabile 17-4 e trattato termicamente per raggiungere una durezza H900. Questo prodotto è progettato per offrire una maggiore resistenza e durata.
Caratteristiche principali:
- Tip rinforzato: Il RBF presenta una punta rinforzata che è il 10% più grande (0.102) rispetto alle specifiche TDP (0.093).
- Compatibilità: Compatibile con le estensioni ricevitore AR15/M16 mil-spec e con le estensioni del sistema Vltor A5.
- Materiale: Acciaio inossidabile 17-4 di alta qualità, trattato termicamente.
- Installazione: Installato secondo le istruzioni TM, mantenendo la punta rotonda versatile del buffer retainer TDP.
Nota: Indossa sempre protezioni oculari durante la manipolazione di molle sotto pressione, pin e detent caricati a molla. Il RBF non è una soluzione per lower fuori specifica con il foro del buffer retainer posizionato in modo errato. Se noti segni di usura eccessiva sulla faccia frontale del buffer, è consigliabile richiedere la sostituzione in garanzia del tuo lower receiver.
Le tempistiche delle estensioni del ricevitore (RE) possono variare. Mentre un RE può ruotare oltre il punto morto (con il RE che copre e trattiene il buffer retainer) di 45 gradi o più su un ricevitore, potrebbe riuscire a farlo solo di 15 gradi o meno su un altro. Inoltre, diversi RE hanno valori di tempistica differenti.