EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Minor modification may be neccessary for Rock Islands. EGW products should be installed and checked by a qualified and competent gunsmith. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits (including but not limited to): Sig Sauer 1911 Stainless Super Target* Sig Sauer 1911 Match Elite* Sig Sauer 1911 Target Full Size* Sig Sauer 1911 Max Full Size* STI with adjustable rear sights STI Trojan STI DVC 3 Gun STI DVC Limited STI DVC Classic Springfield Range Officer Springfield Range Officer Elite Target Springfield Loaded Target Rock Island TCM Rock Target FS HC Combo 22TCM / 9MM Rock Island Pro Match ULtra 5” - 45 ACP Rock Island Pro Match Tac Ultra 6” - 45 ACP Rock Island Pro Match Ultra HC - 40S&W Rock Island Pro Match Ultra 6” - 10MM Rock Island Pro Match ULtra 6” HC - 10MM Iver Johnson Eagle XL-SS10 Iver Johnson Eagle SS-10 Iver Johnson Eagle O.D. Green Iver Johnson Eagle Coyote Tan Iver Johnson Eagle XL-10 Ported Iver Johnson Eagle XL-10 Iver Johnson Eagle XL-45 Ported Iver Johnson Eagle XL-45acp Iver Johnson Eagle LR
Montaggio di alta qualità per il tuo Vortex Viper/Venom
Il LPA SIGHT VORTEX VIPER/VENOM SIGHT MOUNT è progettato per offrire una soluzione robusta e affidabile per il montaggio di ottiche red dot. Questo supporto è compatibile con diversi modelli di pistole 1911 e permette un'installazione semplice e veloce.
Descrizione del prodotto
I mirini red dot EGW sono progettati per essere installati da sinistra a destra (con la bocca rivolta in avanti). La guida presenta un cono progressivo per facilitare l'installazione. Rimuovi semplicemente il mirino posteriore della tua arma e sostituiscilo con il supporto EGW per montare il tuo Vortex Viper/Venom, Burris FastFire o Docter red-dot sight. Puoi rimuovere il supporto e ripristinare il tuo mirino posteriore in qualsiasi momento.
Il kit di montaggio include hardware per l'installazione. Potrebbero essere necessarie piccole modifiche per i modelli Rock Island. I prodotti EGW devono essere installati e controllati da un gunsmith qualificato e competente.
Istruzioni di installazione
- Rimuovere il mirino posteriore*
- Installare il supporto EGW nella guida
- Serrare la vite di fissaggio (se applicabile)
- Posizionare il red dot sight sul supporto EGW (posizionare un piccolo pezzo di carta tra il red dot sight e il supporto faciliterà la rimozione e impedirà il contatto del Loctite con il red dot sight)
- Applicare Loctite blu alle viti di montaggio fornite
- Serrare le viti di montaggio a 15in/lbs
Il supporto include:
- 2 viti a testa a bottone - fornite per i mirini Vortex Viper e Venom
- 2 viti a testa piatta - fornite per i mirini Burris FastFire e Docter
Le viti incluse richiedono una chiave a brugola da 5/64'' per l'installazione. La modifica della tua arma potrebbe annullare la garanzia del produttore. Questo prodotto deve essere installato e controllato da un gunsmith qualificato. Non si assumono responsabilità per danni o infortuni che potrebbero derivare da un'installazione o un uso improprio di questo prodotto.
Compatibilità
Questo supporto si adatta a (inclusi ma non limitati a):
- Sig Sauer 1911 Stainless Super Target*
- Sig Sauer 1911 Match Elite*
- Sig Sauer 1911 Target Full Size*
- Sig Sauer 1911 Max Full Size*
- STI con mirini posteriori regolabili
- STI Trojan
- STI DVC 3 Gun
- STI DVC Limited
- STI DVC Classic
- Springfield Range Officer
- Springfield Range Officer Elite Target
- Springfield Loaded Target
- Rock Island TCM Rock Target FS HC Combo 22TCM / 9MM
- Rock Island Pro Match Ultra 5” - 45 ACP
- Rock Island Pro Match Tac Ultra 6” - 45 ACP
- Rock Island Pro Match Ultra HC - 40S&W
- Rock Island Pro Match Ultra 6” - 10MM
- Rock Island Pro Match Ultra 6” HC - 10MM
- Iver Johnson Eagle XL-SS10
- Iver Johnson Eagle SS-10
- Iver Johnson Eagle O.D. Green
- Iver Johnson Eagle Coyote Tan
- Iver Johnson Eagle XL-10 Ported
- Iver Johnson Eagle XL-10
- Iver Johnson Eagle XL-45 Ported
- Iver Johnson Eagle XL-45acp
- Iver Johnson Eagle LR