Gives Your AK The Adjustability & Convenience Of An M4 Stock
Aluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware.
SPECS: Aluminum, hardcoat anodized, matte black finish. 8 (cm) overall length. Fits most AK-47/AKM/AKS rifles with stamped receivers, except the Yugo RPK and Iraqi Tabuk. Accepts Colt and other mil-spec collapsible buttstocks that fit a 1.14 dia. buffer tube. Kit includes stock extension, end cap, mounting bolts, nut, (3) dust plates, and installation instructions.
Altro...
Dà il tuo AK la regolabilità & la comodità di un magazzino di M4
Estensione del ricevitore in alluminio sostituisce il buttstock standard, fisso il tuo AK-47 per farvi installare un calcio pieghevole M4 sul vostro fucile. Fornisce cinque posizioni di bloccaggio; corrispondenti numeri di indice di bianchi sono visibili attraverso il foro di accesso pin comunicato trovato su molti buttstocks. Prese vicino-ricevitore su ogni lato dell'estensione accettano scollegamento rapido, gli snodi pulsante per singolo punto fionda attaccamento. Un vano interno è accessibile rimuovendo il cappuccio a vite dalla parte posteriore dell'estensione. Include il supporto di montaggio.
Specifiche: alluminio, hardcoat anodizzato, finitura nera opaca. 8 (cm) lunghezza complessiva. Si inserisce la maggior parte dei fucili AK-47/AKM/AKS con ricevitori timbrati, tranne la Yugo RPK e Tabuk iracheno. Accetta Colt e altre buttstocks pieghevoli mil-spec che montare un tubo di tampone ø 1,14. Il kit include il prolungamento, tappo, viteria, dado, piastre di polvere (3) e le istruzioni di installazione.
Altro...
Punteggi dei clienti per VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 5
VLTOR simply makes great products(22.02.2010)
Extremely well made, solid, and super easy to install. One of the best upgrades I have ever been able to simply bolt onto a gun. With the newly adjusted LOP on an AK platform, coupled with the Ultimak rail system, I am able to fully utilize a stubby vertical foregrip without any compromise to easy mag changes or a good solid shooting stance.
AWESOME!(08.03.2010)
Quick, easy and SOLID install! Best part about it...IT'S METAL! None of this polymer junk that will break if you ever have to use the butt of your weapon instead.
AWESOME!(08.03.2010)
Quick, easy and SOLID installation and the best part about it... IT'S METAL! None of this polymer junk that will break if you need to use the butt of your weapon instead.
Drop in on Saiga 12(18.09.2010)
Excellent quality, perfect fit on my Saiga 12 shotgun. O-ring on rear cap seals storage area. Magpul MOE fits very well.
WASR 10/63(07.03.2011)
The most sturdy stock system available for an ak47 platform. Really improves feel of the rifle! Would recommend to anyone looking to get an ak to compete with the functionality of the ar15.
Absolutely Outstanding(24.06.2011)
Pleased with this product is an understatement! The hardest part of the install was getting the old stock off! Seriously well made, looks good, and looks like it will last a very long time. I used a Mag pul MOE stock. The rifle looks great. At first I thought I was spending too much money but not anymore. It's well worth the price.
Great Product(25.03.2012)
Just arrived and it took me about 5 minutes to put this on my Mac 90, perfect fit, it took me longer to take off the original stock, strong and looks great, beats a plastic one any day, I will buy more.
Excellent accessory addition to AK(31.08.2013)
Installed easily. Fit perfect, no play like that of a folding stock. Adjustable for pull length. When combined with a Magpul Butt Stock (MIL-SPEC) you made a new AMERICAN FURNITURE version of the AK.
Mak90(15.09.2013)
I put this on a Mak90 (stamped) it fit great easy install . I shoot allot have many AK's Norinco is a bit hard to find parts that work well do to the heavy receiver and berral but this product works well . I like how stought the butt stock is and allows for AR type stock which most of us are use to allows for close combat or distance unlike what was on their.
A must for every tactical rigged AK.(06.06.2015)
Already have one on my WASR-10(also has an eotech exps 3-4). Transition from clearing rooms to engaging longer range targets in seconds. This will be my second VLTOR AK buffer tube. This one is going on my Saiga 12.
N. prodotto: 100003177 VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER Parti Fabbricante: RE47 Estensione del ricevitore in alluminio sostituisce il buttstock standard, fisso il tuo AK-47 per farvi installare un calcio pieghevole M4 sul vostro fucile. Fornisce cinque posizioni di bloccaggio; corrispondenti numeri di indice di bianchi sono visibili attraverso il foro di accesso pin comunicato trovato su molti buttstocks. Prese vicino-ricevitore su ogni lato dell'estensione accettano scollegamento rapido, gli snodi pulsante per singolo punto fionda attaccamento. Un vano interno è accessibile rimuovendo il cappuccio a vite dalla parte posteriore dell'estensione. Include il supporto di montaggio.
118.9CHF3CHF 118.90
*CHF 139.90
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
AK-47
Colore:
Black
Finitura:
Opaco
Materiale:
Alluminio
Modello:
AK-47
Tipo:
Collassabile
Peso della spedizione: 0.249kgAltezza di spedizione: 33mmLarghezza di spedizione: 58mmLunghezza di spedizione: 251mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Gives Your AK The Adjustability & Convenience Of An M4 Stock
Aluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware.
SPECS: Aluminum, hardcoat anodized, matte black finish. 8 (cm) overall length. Fits most AK-47/AKM/AKS rifles with stamped receivers, except the Yugo RPK and Iraqi Tabuk. Accepts Colt and other mil-spec collapsible buttstocks that fit a 1.14 dia. buffer tube. Kit includes stock extension, end cap, mounting bolts, nut, (3) dust plates, and installation instructions.
Altro...
Dà il tuo AK la regolabilità & la comodità di un magazzino di M4
Estensione del ricevitore in alluminio sostituisce il buttstock standard, fisso il tuo AK-47 per farvi installare un calcio pieghevole M4 sul vostro fucile. Fornisce cinque posizioni di bloccaggio; corrispondenti numeri di indice di bianchi sono visibili attraverso il foro di accesso pin comunicato trovato su molti buttstocks. Prese vicino-ricevitore su ogni lato dell'estensione accettano scollegamento rapido, gli snodi pulsante per singolo punto fionda attaccamento. Un vano interno è accessibile rimuovendo il cappuccio a vite dalla parte posteriore dell'estensione. Include il supporto di montaggio.
Specifiche: alluminio, hardcoat anodizzato, finitura nera opaca. 8 (cm) lunghezza complessiva. Si inserisce la maggior parte dei fucili AK-47/AKM/AKS con ricevitori timbrati, tranne la Yugo RPK e Tabuk iracheno. Accetta Colt e altre buttstocks pieghevoli mil-spec che montare un tubo di tampone ø 1,14. Il kit include il prolungamento, tappo, viteria, dado, piastre di polvere (3) e le istruzioni di installazione.
Altro...
Punteggi dei clienti per VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 5
VLTOR simply makes great products(22.02.2010)
Extremely well made, solid, and super easy to install. One of the best upgrades I have ever been able to simply bolt onto a gun. With the newly adjusted LOP on an AK platform, coupled with the Ultimak rail system, I am able to fully utilize a stubby vertical foregrip without any compromise to easy mag changes or a good solid shooting stance.
AWESOME!(08.03.2010)
Quick, easy and SOLID install! Best part about it...IT'S METAL! None of this polymer junk that will break if you ever have to use the butt of your weapon instead.
AWESOME!(08.03.2010)
Quick, easy and SOLID installation and the best part about it... IT'S METAL! None of this polymer junk that will break if you need to use the butt of your weapon instead.
Drop in on Saiga 12(18.09.2010)
Excellent quality, perfect fit on my Saiga 12 shotgun. O-ring on rear cap seals storage area. Magpul MOE fits very well.
WASR 10/63(07.03.2011)
The most sturdy stock system available for an ak47 platform. Really improves feel of the rifle! Would recommend to anyone looking to get an ak to compete with the functionality of the ar15.
Absolutely Outstanding(24.06.2011)
Pleased with this product is an understatement! The hardest part of the install was getting the old stock off! Seriously well made, looks good, and looks like it will last a very long time. I used a Mag pul MOE stock. The rifle looks great. At first I thought I was spending too much money but not anymore. It's well worth the price.
Great Product(25.03.2012)
Just arrived and it took me about 5 minutes to put this on my Mac 90, perfect fit, it took me longer to take off the original stock, strong and looks great, beats a plastic one any day, I will buy more.
Excellent accessory addition to AK(31.08.2013)
Installed easily. Fit perfect, no play like that of a folding stock. Adjustable for pull length. When combined with a Magpul Butt Stock (MIL-SPEC) you made a new AMERICAN FURNITURE version of the AK.
Mak90(15.09.2013)
I put this on a Mak90 (stamped) it fit great easy install . I shoot allot have many AK's Norinco is a bit hard to find parts that work well do to the heavy receiver and berral but this product works well . I like how stought the butt stock is and allows for AR type stock which most of us are use to allows for close combat or distance unlike what was on their.
A must for every tactical rigged AK.(06.06.2015)
Already have one on my WASR-10(also has an eotech exps 3-4). Transition from clearing rooms to engaging longer range targets in seconds. This will be my second VLTOR AK buffer tube. This one is going on my Saiga 12.