Caratteristiche
- Calibro:
25 Calibro (.257)
- Peso della spedizione: 0.005kg
- Larghezza di spedizione: 83mm
- Lunghezza di spedizione: 146mm
Prezzi comprensivi di IVA più spedizione
N. prodotto: 749001036
Produciamo piloti per il nostro strumento per fori di accensione e il nostro calibro per spessore/varianza del collo. I nostri piloti sono realizzati con precisione in acciaio inossidabile su centri di tornitura CNC per adattarsi correttamente ai colli di cartucce nuove e non sparate. Disponibili per cartucce di fucile e pistola da 22 a 45 calibro. Non adatti per l'uso su .50 BMG. Il diametro del foro di accensione del 50 BMG è più grande.Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Prezzi comprensivi di IVA più spedizione
Presentiamo i SINCLAIR STAINLESS STEEL PILOTS, progettati per garantire risultati ottimali nella lavorazione delle munizioni. Questi piloti sono realizzati in acciaio inossidabile di alta qualità, offrendo durata e affidabilità.
Produciamo piloti per il nostro flash hole tool e il nostro Neck Thickness/Variance Gauge. I nostri piloti sono fresati con precisione in acciaio inossidabile su centri di tornitura CNC per adattarsi correttamente ai colli di cartucce nuove e non sparate. Sono disponibili per cartucce di fucile e pistola da 22 a 45 calibro. Non sono adatti per l'uso su .50 BMG, poiché il diametro del flash hole per il .50 BMG è maggiore.
Affidati a SINCLAIR INTERNATIONAL per strumenti di alta precisione e migliora la tua esperienza di ricarica.
25 Calibro (.257)
Nice but worthless 12.02.2018
As the description reads, they're for checking neck runout on new case necks. But who checks even new brass neck runout without expanding to ensure any factory deviations are pushed out and the inside of neck is consistent. Even Sinclair's reloading procedure recommends it. However, Sinclair's smallest expander measures .2815" and #26284 pilot stop measures .2735, an .008" difference leaving a lot of slop. Review also applies to the 223 pilot and the review there by another is pretty much valid!
Way Undersize pilot 19.01.2015
The 22 cal pilot I received measured .212. Tech support said they were designed to be .007 undersized. If you assume the 22 cal intended was .224, then .007 undersize should have been .217 and not the measured ,212. This leaves so much slop when the neck is placed over the pilot that when rotating the case for a measurement, results are erratic.The same pilot issue occured with the 30 cal pilot. I sent the whole thing back tool and pilots and purchased a Redding. The Redding pilots are .004 below caliber which is perfect. Sinclair would have a very competitive product if their pilots were sized correctly.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.