Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

SINCLAIR INTERNATIONAL
AR-15/M16 SINGLE SHOT MAGAZINE FOLLOWER

749002692
If you are using the longer, heavier bullets in your AR-15, then you need a Sinclair AR-15 Single Shot Follower. The longer, heavier bullets are normally loaded longer than magazine length. The Sinclair AR-15 Single Shot Follower positions the 223 Remington cartridge loaded with longer bullets correctly for smooth feeding into the chamber. Once a round is fired, the bolt retracts and locks behind the follower in the empty/loading position. No need to take your magazine apart! It takes only a few seconds to install the Sinclair Follower on top of the existing follower. It can be removed just as quickly. This follower addresses many of the problems with existing single shot followers on the market. The satin finished anodized aluminum wears better than the plastic followers and is easily noticeable in the magazine. Works perfectly in GI metal magazines and Brownell magazines. Will not work in any of the inexpensive, plastic magazines we tested. Will work with 450 SOCOM and 450 Bushmaster.
24.9 24.9 1 CHF
N. prodotto: 749002692
SINCLAIR INTERNATIONAL AR-15 ALUMINUM SINGLE SHOT FOLLOWER
Parti Fabbricante: 141300 Se si utilizza i proiettili più lunghi, più pesanti nel vostro AR-15, allora avete bisogno di un seguace di colpo singolo Sinclair AR-15. I proiettili più lunghi, più pesanti in genere vengono caricati più di lunghezza. Il seguace di colpo singolo Sinclair AR-15 posizioni la cartuccia Remington 223 caricata con proiettili più correttamente per alimentazione liscia nella camera. Una volta che un colpo, l'otturatore si ritrae e blocca dietro il seguace in posizione di carico/vuoto. Non c'è bisogno di smontare la vostra rivista! Ci vogliono solo pochi secondi per installare il Sinclair Follower in cima il seguace esistente. Può essere rimosso altrettanto rapidamente. Questo seguace risolve molti dei problemi con dei genitori single shot seguaci sul mercato. L'alluminio anodizzato finito raso indossa meglio che i seguaci di plastica ed è facilmente visibile nella rivista. Funziona perfettamente in riviste metallo GI e Brownell. Non funzionerà in qualsiasi delle riviste poco costoso, plastica che abbiamo testato. Funzionerà con 450 SOCOM e 450 Bushmaster.
24.9 CHF 2 CHF 24.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR-15 Quantità: 1

Caratteristiche

Adatto per: AR-15 Peso della spedizione: 0.023kg Altezza di spedizione: 5mm Larghezza di spedizione: 142mm Lunghezza di spedizione: 180mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x



If you are using the longer, heavier bullets in your AR-15, then you need a Sinclair AR-15 Single Shot Follower. The longer, heavier bullets are normally loaded longer than magazine length. The Sinclair AR-15 Single Shot Follower positions the 223 Remington cartridge loaded with longer bullets correctly for smooth feeding into the chamber. Once a round is fired, the bolt retracts and locks behind the follower in the empty/loading position. No need to take your magazine apart! It takes only a few seconds to install the Sinclair Follower on top of the existing follower. It can be removed just as quickly. This follower addresses many of the problems with existing single shot followers on the market. The satin finished anodized aluminum wears better than the plastic followers and is easily noticeable in the magazine. Works perfectly in GI metal magazines and Brownell magazines. Will not work in any of the inexpensive, plastic magazines we tested. Will work with 450 SOCOM and 450 Bushmaster.
Newsletter