Caratteristiche
- Cartuccia: -
- Tipo: Press Type
- Peso della spedizione: 0.032kg
- Altezza di spedizione: 20mm
- Larghezza di spedizione: 61mm
- Lunghezza di spedizione: 99mm
- UPC: 611760116995
Prezzi comprensivi di IVA più spedizione
N. prodotto: 749000250
N. fab.: 11699
611760116995 Il set di cinque shellholder di Redding è progettato per consentire di regolare il proprio headspace selezionando lo spessore appropriato dello shellholder Redding. I cinque shellholder sono più spessi di +.002", +.004", +.006", +.008" e +.010" rispetto agli shellholder normali (.125" dal fondo del taglio della testa del bossolo fino alla parte superiore dello shellholder). Ogni shellholder è chiaramente contrassegnato e ha una finitura in ossido nero per distinguerli dagli shellholder normali. Viene fornito in una scatola di stoccaggio a 6 posizioni, lasciando uno spazio vuoto per il tuo shellholder regolare. Visualizza il grafico degli shellholder Redding.Il set di supporti per cartucce Redding è composto da cinque pezzi progettati per permetterti di regolare il tuo headspace selezionando lo spessore appropriato del supporto Redding. Ogni supporto è chiaramente contrassegnato e presenta una finitura in ossido nero per distinguerlo dai supporti normali.
Scopri il Redding Shellholder Chart per ulteriori informazioni sui supporti per cartucce.
Useless Waste of Money 26.01.2017
Following the directions, and using with a Redding press and die, I was unable to bump identical brass with any consistency whatsoever. I did not find this product useful at all, and it's grossly overpriced for a set of shell holders. Should be about $20 even if they are useful to you. I love made in the USA, and Redding is a good company, but I returned this product.
Cartridge headspace made easy 25.12.2010
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.