The SOCOM II M1A Rifle is a compact, powerful close quarter combat battle rifle. However its "Cluster Rail" system makes it difficult to mount a conventional low powered scope. You have to install an additional receiver mounted scope base to the SOCOM II along with a set of scope rings that are tall enough so that the objective lens clears the top rail. If you want Quick Detach capability, you need to mount your scope on top of the receiver mounted scope base with some type of QD mount and ring combo. We think that's a PIA and has too many interface points that could negatively affect the zero retention of your scope. The New Products Team at GG&G has come up with an innovative solution---The SOCOM II Accucam Quick Detach Scope Mount With 30mm Integral Rings: The Accucam Quick Detach System provides quick and easy on-off transitions while maintaining 1/2 MOA accuracy. Accucam QD System is fully adjustable to fit worn or out of spec dovetails. The SOCOM II Accucam Quick Detach Scope Mount has dual recoil lugs that interface with the recoil slots of the top dovetail rail to provide secure recoil resistance. The scope mount has 30mm integral rings with four cap screws per ring. Each cap screw threads into stainless steel helicoils. The cantilever feature of the SOCOM II Scope Base overhangs 3" to allow for additional forward/rearward adjustment for scopes with different eye reliefs. The underside of the SOCOM II QD Scope Mount is relief cut for unimpeded cartridge ejection.
SPECS: 2.5" measurement inside ring face to inside ring face allows for forward/rearward adjustment of different eye releif scopes. 1.260" from top of the rail to center of 30mm integral rings, provides lower scope mounting while still clearing the objective lens of most scopes up to 50mm. Manufactured from 6061-T6 Billet Aluminum. Type III Hard Anodized. All Steel components are 4140 Ordnance Steel. length: 6". Weighs 7.7 oz.
Montaggio rapido per il fucile M1A SOCOM II
Il fucile SOCOM II M1A è un'arma compatta e potente per il combattimento a distanza ravvicinata. Tuttavia, il suo sistema "Cluster Rail" rende difficile il montaggio di un'ottica convenzionale a bassa potenza. È necessario installare una base per ottica montata sul ricevitore insieme a un set di anelli per ottica sufficientemente alti affinché l'obiettivo possa superare il rail superiore.
Se desiderate la funzionalità di sgancio rapido, dovete montare l'ottica sulla base per ottica montata sul ricevitore utilizzando un tipo di combinazione di montaggio e anello QD. Riteniamo che questo sia complicato e abbia troppi punti di interfaccia che potrebbero influire negativamente sulla ritenzione dello zero dell'ottica.
Il team dei nuovi prodotti di GG&G ha sviluppato una soluzione innovativa: il Montaggio per Ottica Accucam Quick Detach SOCOM II con Anelli Integrali da 30mm. Il sistema Accucam Quick Detach offre transizioni rapide e facili, mantenendo un'accuratezza di 1/2 MOA. Il sistema Accucam QD è completamente regolabile per adattarsi a guide usurate o fuori specifica.
Il montaggio per ottica SOCOM II Accucam Quick Detach ha doppi lugs di rinculo che si interfacciano con le fessure di rinculo del rail superiore per fornire una resistenza sicura al rinculo. Il montaggio per ottica è dotato di anelli integrali da 30mm con quattro viti per cappuccio per anello. Ogni vite si avvita in elicoili in acciaio inossidabile.
La caratteristica cantilever della base per ottica SOCOM II sporge di 3" per consentire un ulteriore aggiustamento in avanti/indietro per ottiche con diversi rilievi oculari. La parte inferiore del montaggio per ottica SOCOM II QD è tagliata per consentire un'espulsione delle cartucce senza ostacoli.
SPECIFICHE:
- Misura di 2.5" dall'interno del faccia dell'anello all'interno dell'anello per consentire un aggiustamento in avanti/indietro di ottiche con diversi rilievi oculari.
- 1.260" dalla parte superiore del rail al centro degli anelli integrali da 30mm, fornisce un montaggio più basso dell'ottica pur mantenendo l'obiettivo libero per la maggior parte delle ottiche fino a 50mm.
- Realizzato in alluminio Billet 6061-T6.
- Tipo III anodizzato duro.
- Tutti i componenti in acciaio sono in acciaio ordnance 4140.
- Lunghezza: 6".
- Peso: 7.7 oz.