Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.
Porta cartucce SURESHELL POLYMER: la scelta ideale per i professionisti!
Il SURESHELL POLYMER SHOTSHELL CARRIER di MESA TACTICAL PRODUCTS offre una soluzione economica e di alta qualità per trasportare munizioni pronte all'uso. Questo porta cartucce in polimero è progettato per operatori professionisti che non vogliono compromettere qualità, prestazioni e durata.
Descrizione del prodotto
I porta cartucce SureShell® sono realizzati in polimero resistente agli urti e disponibili in una configurazione da sei cartucce. I portacartucce sono stampati a iniezione in polimero rinforzato con vetro e sono fissati al ricevitore tramite una leggera piastra posteriore in alluminio con inserti filettati in ottone. Questo sistema include anche un innovativo sistema di attrito a doppio gommino che tiene le cartucce in posizione in modo affidabile.
Alcuni modelli di SureShell includono guarnizioni in gomma tagliate a misura, con adesivo resistente alle alte temperature, per proteggere la finitura del fucile ospitante. Il sistema di montaggio SureShell per i fucili Remington 870, 1100 e 11-87 utilizza una combinazione di fissaggi in acciaio filettati in un perno in acciaio (posteriormente) e viti Chicago accoppiate (anteriormente) per un attacco più sicuro senza il rischio di schiacciare il ricevitore.
La piastra di montaggio presenta anche una finestra sopra la posizione del numero di serie del fucile, facilitando l'inventario delle armi per gli armieri. I modelli sono disponibili con e senza guide Picatinny integrate per il montaggio di ottiche. Come tutti i porta cartucce SureShell, i nuovi porta cartucce in polimero funzionano bene in tutti i climi e ambienti e sono progettati per resistere all'uso e all'abuso quotidiano a cui sono comunemente sottoposte le armi d'arsenale.
Specifiche
- Realizzato in polimero rinforzato con vetro, piastra posteriore in alluminio leggera, colore nero opaco.
- Per calibro 12 ga solo.
- Tutti i modelli includono hardware di montaggio, guarnizione in gomma e istruzioni per l'installazione.
- Modelli per mano destra solamente.
- Il montaggio laterale Remington si adatta ai modelli 870/1100/11-87 (può richiedere modifiche al fucile).
- Montaggio laterale Rem 6-Round: 6¼” (15.8cm) di lunghezza x 1½” di altezza. Peso: 5.4 oz. (152g).
- Montaggio laterale Rem 8-Round: 7¾” (19.7cm) di lunghezza x 1½” di altezza. Peso: 7 oz. (200g).
- Picatinny Remington si adatta ai modelli 870/1100/11-87 (può richiedere modifiche al fucile). Dimensioni: 7” (15.8cm) di lunghezza x 2½” (6.3cm) di altezza. Peso: 7.6 oz. (215g).
- Mossberg si adatta ai modelli 500/590. Solo 6 colpi. Dimensioni: 6-3/8" (16.2cm) di lunghezza x 1-3/8" (3.5cm) di altezza. Peso: 5.2 oz. (147g).
- Montaggio laterale Benelli si adatta a M1/M2/M3. Montaggio laterale Benelli 6-Round: 6” (15.2cm) di lunghezza x 2½” di altezza. Peso: 6.3 oz. (179g).
- Picatinny Benelli disponibile per M2 (richiede foratura e filettatura del ricevitore per adattarsi a M1), M4/M1014 e Supernova. Picatinny M2 6-Round: 6” di lunghezza x 2” (5.1cm) di altezza. Peso: 7.4 oz. (210g).
- Picatinny M4/M1014 6-Round: 6” di lunghezza x 2” (5.1cm) di altezza. Peso: 7.5 oz. (213g).
- * Richiede l'uso di un forend più corto su Rem 870.
- + Richiede piccole modifiche al forend per adattarsi a Rem 1100/11-87.
- ** Richiede foratura/filettatura del ricevitore per adattarsi a M1.