These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
6.5 PRC
270 WSM
7 RSAUM
300 WSM
The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).
Scopri il caricatore MDT in metallo per prestazioni superiori!
I caricatori MDT sono progettati con un'unica transizione Double Stack to Single Feed (DSSF) per una riduzione dell'altezza complessiva rispetto allo standard del settore.
I caricatori in metallo di tipo AICS MDT sono realizzati in acciaio ad alta resistenza, nitrurati e rifiniti all'interno e all'esterno con Cerakote Elite per una durabilità ottimale, resistenza alla corrosione e riduzione dell'attrito.
Compatibilità dei Calibri
- 6.5 PRC
- 270 WSM
- 7 RSAUM
- 300 WSM
I caricatori senza piastre di legatura frontale consentono una lunghezza massima della cartuccia di 2.960”. Questi sono compatibili con tutti i sistemi di metallo inferiore e chassis di tipo AICS, ma le azioni più comuni come Remington 700 e Savage 10/11 richiederanno modifiche al ricevitore (ad esempio, la rimozione del fondo della rampa di alimentazione) per evitare che le punte dei proiettili si incastrino sul fondo della rampa di alimentazione (vedi foto qui sotto).