Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

PEARCE GRIP
GRIP FRAME INSERT FOR GLOCK®

605849200019 092000011

Fills The Opening In Glock Frame For Smoother Reloading

Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glock® models 26/27/33/39. Other inserts fit the Glock® models indicated in the price lines below. Does not add extra rounds.

SPECS: Impact-resistant plastic, black. One per pack.

Plus...

Remplit l'ouverture dans le cadre de Glock pour rechargement plus lisse

Bouchon en plastique s'installe dans la cavité arrière inférieure du cadre pour combler l'ouverture dans les pistolets Glock ®. Formes de « Lèvre » avant un lien serré, affleurant au puits mag afin de s'assurer que le mag va là où il devrait, en douceur. Empêche la saleté et les débris de trouver son chemin à l'intérieur du pistolet et donne un aspect propre et lisse. Utilise le trou longe de maintien pour fixer fermement en place. Glock ® Plus zéro corresponde modèles 17 au 25, 31, 32, 34, 35, 37 et 38. GEN 4 poignée châssis insère autorise l'utilisation de la colliers interchangeables de l'usine. Modèle complet & Mid GEN 4 s'adapte génération 4 Glock ® modèles 17/18/19/22/23/24/25/31/32/34/35/37/38. GEN 4 sous-compacte modèle s'intègre les modèles de génération 4 Glock ® 26/27/33/39. Autres insertions ajustement les modèles de Glock ® indiquées dans les lignes de prix ci-dessous. N'ajoute pas de tours supplémentaires.

« GLOCK » est une marque déposée par le gouvernement fédéral de Glock, Inc. et est l'une des nombreuses marques de Glock, Inc. ou Glock Ges.m.b.H. Brownells est un revendeur indépendant de pièces et accessoires pour les pistolets Glock ® et n'est pas affilié à ou approuvés par Glock, Inc. ou Glock Ges.m.b.H. l'utilisation de Glock sur cette page ne sert qu'à annoncer la vente de pièces de Glock ou composants. comme il est indiqué dans les descriptions de produit , pas toutes les pièces et accessoires sur ce site sont des produits officiels de Glock.

SPECS : plastique résistant aux chocs, noir. Une par paquet.

Plus...

Évaluations client de PEARCE GRIP SUBCOMPACT GRIP FRAME INSERT, MODEL 26/27/33/39

Nombre d'évaluations: 19
De brownells.com: 19
Note moyenne: 4.1

Perfect (28.10.2015)

Fits perfectly, tight, flush, nice color match. Gives a nice clean finished look..

Perfect fit in the 43. (15.04.2016)

Perfect fit in my 43. Brownells' needs to update indicating this is made to fit the 42 and 43.

Quality product (24.03.2012)

Perfect fit in my Gen 4 G34. Very impressed, matches the stock dimensions VERY well.

Perfect! (29.05.2012)

Perfect fit on my G17 Gen 4 and able to use the back straps. Glad I went with this and not the others I was looking at.

Made to fit (02.11.2013)

It fits so well you can't find the seam with your fingernail. Smooth mag well fit. Best four bucks you can spend on a Glock.

A Good Purchase (08.04.2015)

Given its low price, I'd recommend this insert to anyone who wants to plug that cavity (which likely is more of an aesthetic decision than a practical or tactical one) and still be able to employ the back straps. I use the large back strap along with this Pearce insert in my 17, and I'm very pleased with the overall results.

Best Grip Plug for you Gen 4 Glock (19.12.2016)

I have looked at different plugs for my Gen 4 Glock. This one is all in one. Meaning you can use different size grips. Most of the grips I have looked at you need to decide, small, medium or large. The Pearce Grip Plug is easy to install, looks good, one piece, and you can use it for all of the grips. Best plug for your buck.

Idiot proof (06.08.2010)

Slips in easy yet firm. Completes the look of the frame. No idea why Glock didnt do this in the first place!

Save your money (18.07.2013)

The only way to secure it in the grip of my 20sf would be super glue or a screw. There is no nub on the plug to click into the grip hole...so non secured it will just fall out. Poor product design.

G21SF plug falls out (12.09.2015)

The idea is good but . . .

This looked good and tight when installed but fell out on the third shot fired. reinserting it lasted only one more shot making this useless. The ones I've installed in my 19 and 26 work as advertised. However, without gluing as stated in the other review, it will not stay in the gun. That is just not acceptable.

Works great! (04.05.2016)

Not sure why some people are having issues with fitment or why this has a bad review rating. I have a Gen 3 Glock 21 SF and this insert fits nice and snug.

Great Piece Great Price (23.01.2010)

It does exactly what it says it will do. I cannot ask for much more.

Simple but effective (18.05.2011)

EASY to install and works as advertised, keeping dust, lint and debris out. Only down side would be that it prevents use of the lanyard hole, if you happen to need that...

Different from Picture (30.06.2011)

This specific one that's made for subcompact glock is friction fit, which means there's no tab to hold it in place like the one shown in the picture. (since there's no lanyard hole to begin with on this model of glock.) Further more, since it's friction fit, after a few shoots fired, it begins to slip out of it's socket. It's a unnecessary distraction especially in self defense situation. Product not recommended.

Insert for G-26 does not stay put. (29.12.2015)

I agree with the other 1 star comment that this insert does not stay in place for the subcompacts. I've lost a couple at the range and the last one bought only took five shots to come lose and drop off. I've reinstalled it with a few dabs of medium strength locktite and, maybe this will help keep it in place and still be removable when needed. We'll see.

Why not? (16.12.2009)

It's cheap, and is a good cosmetic enhancement, but not much else.

Works Awesome (13.06.2011)

Works as advertised.

Works Great (21.03.2015)

It snapped right into my Glock 22. Fills in that ugly hole in the frame. Keeps the dust out.

Will buy another for my Glock 20.

Pearce Grip Frame Insert (05.01.2016)

I always wondered why Glocks have that hole in the grip. This item filled the ugly hole in the grip and will help keep dust, dirt, and debris from getting into the gun.

Lire 19 plus d'avis sur brownells.com

7.53 7.53 1 CHF

Sale

Référence: 092000011
PEARCE GRIP SUBCOMPACT GRIP FRAME INSERT, MODEL 26/27/33/39
Ref Fabricant: PGGFISC 605849200019 Bouchon en plastique s'installe dans la cavité arrière inférieure du cadre pour combler l'ouverture dans les pistolets Glock ®. Formes de « Lèvre » avant un lien serré, affleurant au puits mag afin de s'assurer que le mag va là où il devrait, en douceur. Empêche la saleté et les débris de trouver son chemin à l'intérieur du pistolet et donne un aspect propre et lisse. Utilise le trou longe de maintien pour fixer fermement en place. Glock ® Plus zéro corresponde modèles 17 au 25, 31, 32, 34, 35, 37 et 38. GEN 4 poignée châssis insère autorise l'utilisation de la colliers interchangeables de l'usine. Modèle complet & Mid GEN 4 s'adapte génération 4 Glock ® modèles 17/18/19/22/23/24/25/31/32/34/35/37/38. GEN 4 sous-compacte modèle s'intègre les modèles de génération 4 Glock ® 26/27/33/39. Autres insertions ajustement les modèles de Glock ® indiquées dans les lignes de prix ci-dessous. N'ajoute pas de tours supplémentaires.

7.53 CHF 100 CHF 7.53 * CHF 9.90

Délai de livraison environ 2-4 jours à partir de l'entrepôt local.

Caractéristiques: Manufacture: Glock Modèle: 39, 26, 27, 33

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: Glock Modèle: 26,27,33,39 Poids du colis: 0.005kg Hauteur d'expédition: 33mm Largeur d'expédition: 69mm Longueur d'expédition: 89mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.y.1

Fills The Opening In Glock Frame For Smoother Reloading

SPECS: Impact-resistant plastic, black. One per pack.

Plus...

Remplit l'ouverture dans le cadre de Glock pour rechargement plus lisse

SPECS : plastique résistant aux chocs, noir. Une par paquet.

Plus...

Évaluations client de PEARCE GRIP SUBCOMPACT GRIP FRAME INSERT, MODEL 26/27/33/39

Nombre d'évaluations: 19
De brownells.com: 19
Note moyenne: 4.1

Perfect (28.10.2015)

Fits perfectly, tight, flush, nice color match. Gives a nice clean finished look..

Perfect fit in the 43. (15.04.2016)

Perfect fit in my 43. Brownells' needs to update indicating this is made to fit the 42 and 43.

Quality product (24.03.2012)

Perfect fit in my Gen 4 G34. Very impressed, matches the stock dimensions VERY well.

Perfect! (29.05.2012)

Perfect fit on my G17 Gen 4 and able to use the back straps. Glad I went with this and not the others I was looking at.

Made to fit (02.11.2013)

It fits so well you can't find the seam with your fingernail. Smooth mag well fit. Best four bucks you can spend on a Glock.

A Good Purchase (08.04.2015)

Best Grip Plug for you Gen 4 Glock (19.12.2016)

Idiot proof (06.08.2010)

Slips in easy yet firm. Completes the look of the frame. No idea why Glock didnt do this in the first place!

Save your money (18.07.2013)

The only way to secure it in the grip of my 20sf would be super glue or a screw. There is no nub on the plug to click into the grip hole...so non secured it will just fall out. Poor product design.

G21SF plug falls out (12.09.2015)

Works great! (04.05.2016)

Not sure why some people are having issues with fitment or why this has a bad review rating. I have a Gen 3 Glock 21 SF and this insert fits nice and snug.

Great Piece Great Price (23.01.2010)

It does exactly what it says it will do. I cannot ask for much more.

Simple but effective (18.05.2011)

EASY to install and works as advertised, keeping dust, lint and debris out. Only down side would be that it prevents use of the lanyard hole, if you happen to need that...

Different from Picture (30.06.2011)

Insert for G-26 does not stay put. (29.12.2015)

Why not? (16.12.2009)

It's cheap, and is a good cosmetic enhancement, but not much else.

Works Awesome (13.06.2011)

Works as advertised.

Works Great (21.03.2015)

It snapped right into my Glock 22. Fills in that ugly hole in the frame. Keeps the dust out.

Will buy another for my Glock 20.

Pearce Grip Frame Insert (05.01.2016)

I always wondered why Glocks have that hole in the grip. This item filled the ugly hole in the grip and will help keep dust, dirt, and debris from getting into the gun.

Lire 19 plus d'avis sur brownells.com

Poursuivre vos achats

Sale

MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3
GL ENHANCED MAGAZINE WELLS FOR GLOCK® 17

MAGPUL

En stock

CHF 33.10 *

Ancien prix CHF 38.90

2.8

BROWNELLS COTTON TIPPED APPLICATORS 1,000/PACK
COTTON TIPPED APPLICATORS

BROWNELLS

En stock

CHF 119.90 * CHF 19.90 - CHF 119.90*

Tampons de Nettoayge

4.8

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.