Give greater versatility to your shotgun or rifle with up to 1" vertical drop, 22° left or right tilt, and 5/16" horizontal offset of the recoil pad or buttstock position. Ultra-thin, multi-position stock plates add only ¼, yet provide fast, easy, vertical, horizontal, and diagonal adjustments of buttstock position to match changes in shooting style, clothing, or shooting conditions. Machined steel thread inserts give fast recoil pad changes. Completely pre-drilled, threaded, and made from easy-to-grind aluminum. Browning (B) model is pre-shaped and contoured to fit the Browning Citori Plus and BT99 Plus
SPECS: Machined 6061T6 aluminum, anodized, black. Includes mounting hardware and Allen wrenches.Browning Adjuster - 5.06” (12.85cm) long, 1.835” (4.66cm) wide, .295” (7.5mm) thick, with slotted lower screw hole for c-to-c spacing of 3.14” to 3.48” (7.97cm to 8.84cm) on the stock side and 3.12” (7.92cm) on the pad side. Fits Citori Plus and BT-99. Will not fit 525 Sporting Clays models.
Plus...
Donner une plus grande polyvalence à votre fusil ou la carabine avec jusqu'à 1" vertical drop, 22° à gauche ou à droite incliner et 5/16" décalage horizontal de la position de recul pad ou de la crosse. Ultra-mince, positions multiples plaques stocks ajouter seulement ¼, fourni encore rapide, facile, vertical, horizontal et diagonales ajustements de crosse du poste en fonction des changements de style de tir, vêtements, ou des conditions de tir. Inserts filetés en acier usiné donnent recul rapide changements pad. Complètement pré-percés, filetée et fabriqué à partir d'aluminium de facile-à-grind. Modèle Browning (B) est préformé et profilée pour s'adapter à la Browning Citori Plus et BT99 Plus
SPECS : usiné 6061 en aluminium, anodisé, noir. Comprend le matériel de montage et clés hexagonales. Browning ajusteur-5,06"(12,85 cm) de long, 1,835" (4.66 cm) de large,. 295"(7,5 mm) d'épaisseur, avec des vis inférieure fendue trou pour espacement c-à-c de 3,14" à 3,48"(7,97 à 8,84 cm) sur le côté stock et 3,12" (7.92 cm) du côté de la touche. Convient pour Citori Plus et BT-99. Ne correspondra pas 525 modèles argiles sportifs.
Plus...
Évaluations client de JONES CITORI BUTT PLATE STOCK ADJUSTER BLACK ALUMINUM
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 5
Jones Stock Adjuster(10.01.2015)
I purchased this for a Browning Citori Lightning. Even though the description stated it was for a BT-99 or Citori Plus, it fit a regular Citori Lightning very well. It is only slightly oversized (~1/32") and I am debating as to whether I should even sand it down to have it fit "perfectly." I paired it with a Kick-Eez dual action recoil pad. You will need two flat head screws (not included) to mount the base plate to the stock. I am very pleased with the set-up and would recommend it to any target shooter looking to customize their gun mount.
Référence: 763100001 JONES CITORI BUTT PLATE STOCK ADJUSTER BLACK ALUMINUM Ref Fabricant: BR + EZ Donner une plus grande polyvalence à votre fusil ou la carabine avec jusqu'à 1" vertical drop, 22° à gauche ou à droite incliner et 5/16" décalage horizontal de la position de recul pad ou de la crosse. Ultra-mince, positions multiples plaques stocks ajouter seulement ¼, fourni encore rapide, facile, vertical, horizontal et diagonales ajustements de crosse du poste en fonction des changements de style de tir, vêtements, ou des conditions de tir. Inserts filetés en acier usiné donnent recul rapide changements pad. Complètement pré-percés, filetée et fabriqué à partir d'aluminium de facile-à-grind. Modèle Browning (B) est préformé et profilée pour s'adapter à la Browning Citori Plus et BT99 Plus
124.9CHF8CHF 124.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Give greater versatility to your shotgun or rifle with up to 1" vertical drop, 22° left or right tilt, and 5/16" horizontal offset of the recoil pad or buttstock position. Ultra-thin, multi-position stock plates add only ¼, yet provide fast, easy, vertical, horizontal, and diagonal adjustments of buttstock position to match changes in shooting style, clothing, or shooting conditions. Machined steel thread inserts give fast recoil pad changes. Completely pre-drilled, threaded, and made from easy-to-grind aluminum. Browning (B) model is pre-shaped and contoured to fit the Browning Citori Plus and BT99 Plus
SPECS: Machined 6061T6 aluminum, anodized, black. Includes mounting hardware and Allen wrenches.Browning Adjuster - 5.06” (12.85cm) long, 1.835” (4.66cm) wide, .295” (7.5mm) thick, with slotted lower screw hole for c-to-c spacing of 3.14” to 3.48” (7.97cm to 8.84cm) on the stock side and 3.12” (7.92cm) on the pad side. Fits Citori Plus and BT-99. Will not fit 525 Sporting Clays models.
Plus...
Donner une plus grande polyvalence à votre fusil ou la carabine avec jusqu'à 1" vertical drop, 22° à gauche ou à droite incliner et 5/16" décalage horizontal de la position de recul pad ou de la crosse. Ultra-mince, positions multiples plaques stocks ajouter seulement ¼, fourni encore rapide, facile, vertical, horizontal et diagonales ajustements de crosse du poste en fonction des changements de style de tir, vêtements, ou des conditions de tir. Inserts filetés en acier usiné donnent recul rapide changements pad. Complètement pré-percés, filetée et fabriqué à partir d'aluminium de facile-à-grind. Modèle Browning (B) est préformé et profilée pour s'adapter à la Browning Citori Plus et BT99 Plus
SPECS : usiné 6061 en aluminium, anodisé, noir. Comprend le matériel de montage et clés hexagonales. Browning ajusteur-5,06"(12,85 cm) de long, 1,835" (4.66 cm) de large,. 295"(7,5 mm) d'épaisseur, avec des vis inférieure fendue trou pour espacement c-à-c de 3,14" à 3,48"(7,97 à 8,84 cm) sur le côté stock et 3,12" (7.92 cm) du côté de la touche. Convient pour Citori Plus et BT-99. Ne correspondra pas 525 modèles argiles sportifs.
Plus...
Évaluations client de JONES CITORI BUTT PLATE STOCK ADJUSTER BLACK ALUMINUM
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 5
Jones Stock Adjuster(10.01.2015)
I purchased this for a Browning Citori Lightning. Even though the description stated it was for a BT-99 or Citori Plus, it fit a regular Citori Lightning very well. It is only slightly oversized (~1/32") and I am debating as to whether I should even sand it down to have it fit "perfectly." I paired it with a Kick-Eez dual action recoil pad. You will need two flat head screws (not included) to mount the base plate to the stock. I am very pleased with the set-up and would recommend it to any target shooter looking to customize their gun mount.