Give greater versatility to your shotgun or rifle with up to 1" vertical drop, 22° left or right tilt, and 5/16" horizontal offset of the recoil pad or buttstock position. Ultra-thin, multi-position stock plates add only ¼, yet provide fast, easy, vertical, horizontal, and diagonal adjustments of buttstock position to match changes in shooting style, clothing, or shooting conditions. Machined steel thread inserts give fast recoil pad changes. Completely pre-drilled, threaded, and made from easy-to-grind aluminum. Browning (B) model is pre-shaped and contoured to fit the Browning Citori Plus and BT99 Plus
SPECS: Machined 6061T6 aluminum, anodized, black. Includes mounting hardware and Allen wrenches.Browning Adjuster - 5.06” (12.85cm) long, 1.835” (4.66cm) wide, .295” (7.5mm) thick, with slotted lower screw hole for c-to-c spacing of 3.14” to 3.48” (7.97cm to 8.84cm) on the stock side and 3.12” (7.92cm) on the pad side. Fits Citori Plus and BT-99. Will not fit 525 Sporting Clays models.
Altro...
Dare una maggiore versatilità al vostro fucile o carabina con fino a 1" verticale drop, 22° a sinistra o destra inclinare e 5/16" offset orizzontale della posizione recoil pad o buttstock. Ultra-sottile, multi-posizione piastre dipinga aggiungere solo ¼, fornisce ancora veloce, facile, verticale, orizzontale e diagonale regolazioni del buttstock posizionare per abbinare i cambiamenti di stile di tiro, abbigliamento, o condizioni di ripresa. Inserti filettati in acciaio lavorati a dare veloce rinculo modifiche di rilievo. Completamente pre-forati, filettati e fatto da alluminio di facile--frantumare. Modello Browning (B) è a pre- forma di e sagomato per adattarsi il Browning Citori Plus e BT99 Plus
Specifiche: lavorati 6061T6 alluminio, anodizzato, nero. Include il supporto di montaggio e chiavi esagonali. Aggiustatore di Browning-5,06 (cm 12) lunga, 1,835"(4,66 cm) largamente,. 295" (7,5 mm) spessore, con vite scanalata inferiore foro per spaziatura di c-a-c di 3,14" a 3,48" (7.97 cm a 8,84 cm) sul lato magazzino e 3,12 (cm 7,92) sul lato pad. Si inserisce Citori Plus e BT-99. Non si adatterà 525 modelli Sporting Argille.
Altro...
Punteggi dei clienti per JONES CITORI BUTT PLATE STOCK ADJUSTER BLACK ALUMINUM
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Jones Stock Adjuster(10.01.2015)
I purchased this for a Browning Citori Lightning. Even though the description stated it was for a BT-99 or Citori Plus, it fit a regular Citori Lightning very well. It is only slightly oversized (~1/32") and I am debating as to whether I should even sand it down to have it fit "perfectly." I paired it with a Kick-Eez dual action recoil pad. You will need two flat head screws (not included) to mount the base plate to the stock. I am very pleased with the set-up and would recommend it to any target shooter looking to customize their gun mount.
N. prodotto: 763100001 JONES CITORI BUTT PLATE STOCK ADJUSTER BLACK ALUMINUM Parti Fabbricante: BR + EZ Dare una maggiore versatilità al vostro fucile o carabina con fino a 1" verticale drop, 22° a sinistra o destra inclinare e 5/16" offset orizzontale della posizione recoil pad o buttstock. Ultra-sottile, multi-posizione piastre dipinga aggiungere solo ¼, fornisce ancora veloce, facile, verticale, orizzontale e diagonale regolazioni del buttstock posizionare per abbinare i cambiamenti di stile di tiro, abbigliamento, o condizioni di ripresa. Inserti filettati in acciaio lavorati a dare veloce rinculo modifiche di rilievo. Completamente pre-forati, filettati e fatto da alluminio di facile--frantumare. Modello Browning (B) è a pre- forma di e sagomato per adattarsi il Browning Citori Plus e BT99 Plus
124.9CHF8CHF 124.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Browning
Colore:
Black
Finitura:
Nero
Materiale:
Alluminio
Modello:
Ciari
Peso della spedizione: 0.091kgAltezza di spedizione: 10mmLarghezza di spedizione: 97mmLunghezza di spedizione: 147mm
Give greater versatility to your shotgun or rifle with up to 1" vertical drop, 22° left or right tilt, and 5/16" horizontal offset of the recoil pad or buttstock position. Ultra-thin, multi-position stock plates add only ¼, yet provide fast, easy, vertical, horizontal, and diagonal adjustments of buttstock position to match changes in shooting style, clothing, or shooting conditions. Machined steel thread inserts give fast recoil pad changes. Completely pre-drilled, threaded, and made from easy-to-grind aluminum. Browning (B) model is pre-shaped and contoured to fit the Browning Citori Plus and BT99 Plus
SPECS: Machined 6061T6 aluminum, anodized, black. Includes mounting hardware and Allen wrenches.Browning Adjuster - 5.06” (12.85cm) long, 1.835” (4.66cm) wide, .295” (7.5mm) thick, with slotted lower screw hole for c-to-c spacing of 3.14” to 3.48” (7.97cm to 8.84cm) on the stock side and 3.12” (7.92cm) on the pad side. Fits Citori Plus and BT-99. Will not fit 525 Sporting Clays models.
Altro...
Dare una maggiore versatilità al vostro fucile o carabina con fino a 1" verticale drop, 22° a sinistra o destra inclinare e 5/16" offset orizzontale della posizione recoil pad o buttstock. Ultra-sottile, multi-posizione piastre dipinga aggiungere solo ¼, fornisce ancora veloce, facile, verticale, orizzontale e diagonale regolazioni del buttstock posizionare per abbinare i cambiamenti di stile di tiro, abbigliamento, o condizioni di ripresa. Inserti filettati in acciaio lavorati a dare veloce rinculo modifiche di rilievo. Completamente pre-forati, filettati e fatto da alluminio di facile--frantumare. Modello Browning (B) è a pre- forma di e sagomato per adattarsi il Browning Citori Plus e BT99 Plus
Specifiche: lavorati 6061T6 alluminio, anodizzato, nero. Include il supporto di montaggio e chiavi esagonali. Aggiustatore di Browning-5,06 (cm 12) lunga, 1,835"(4,66 cm) largamente,. 295" (7,5 mm) spessore, con vite scanalata inferiore foro per spaziatura di c-a-c di 3,14" a 3,48" (7.97 cm a 8,84 cm) sul lato magazzino e 3,12 (cm 7,92) sul lato pad. Si inserisce Citori Plus e BT-99. Non si adatterà 525 modelli Sporting Argille.
Altro...
Punteggi dei clienti per JONES CITORI BUTT PLATE STOCK ADJUSTER BLACK ALUMINUM
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Jones Stock Adjuster(10.01.2015)
I purchased this for a Browning Citori Lightning. Even though the description stated it was for a BT-99 or Citori Plus, it fit a regular Citori Lightning very well. It is only slightly oversized (~1/32") and I am debating as to whether I should even sand it down to have it fit "perfectly." I paired it with a Kick-Eez dual action recoil pad. You will need two flat head screws (not included) to mount the base plate to the stock. I am very pleased with the set-up and would recommend it to any target shooter looking to customize their gun mount.