Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

D&H INDUSTRIES
AR 308 MAGAZINES

850012639183 100023925

SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.

Altro...

SR25 modello 308 Magazine camerata in calibro. 308. Il rivista corpo è realizzato in acciaio e disponibili in 10 (Orange seguace) o 20 (Green seguace) Arrotonda.

Altro...

Punteggi dei clienti per D&H INDUSTRIES SR25 PATTERN 308 STEEL MAGAZINE 20RD BLACK

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3.8

Works fine in my PA-10 gen2 (28.12.2017)

Bought one to give it a go in my newest toy (Palmeto State Armory gen 2 PA-10). So far zero issues, boring like its suppose to be in other words. It drops free and the bolt holds open on last round. Finish is actually rather nice. Who knows how it holds up long term but so far so good. The thing seems solid in a brick like fashion. The only draw back for me is that it is noticeably heavier than say, a 20 round Pmag while at the same time taking up way less vertical space.

Bottom line.... Good looking, functional mag that seems tough, while weighing a couple ounces more than the biggest plastic competitor. Ya, I'm buying more for my PA-10.

works in Galil ACE and PSA G2 in 7.62x51 (17.03.2018)

If you want steel feed lips the D&H 20rd mag is 7 oz and Lancer LWM 20rd is 6 oz.

D&H has functioned fine and is half the cost of a Lancer mag.

awesome mags ! (09.04.2018)

These mags are burly , they DO hold 20 and they DO load on a closed bolt when loaded with 20 rounds. Orange follower is easy to see in the dark recesses of the upper receiver . Just shy of 9 ounces.....labeled viewing holes cut in the body of the mag ...10,15 and 20........what is not to like ?

<img width="500" src='/userdocs/reviewimages/d7fe7d87-b073-4fac-8f04-ca75eac8b326.jpg' alt=''>

Great but with a hitch (25.04.2018)

This magazines issue isn't the magazines fault, I have an Armalite AR-10A and the magazines are TIGHT in the mag well, as in non-dropfree tight. Again, not the fault of the magazine, just the variation of different rifle manufacturers.

Does Not Fit DPMS RFLR G2B24 (28.04.2018)

I have a DPMS RFLR G2B24. I bought one of these to evaluate since the ones with the light green follower are no longer available; those fit the rifle without any problems. This one requires too much force to insert it into the magazine well; itâs just too tight. Removal is very difficult; it does not fall free.

I should mention that I bought one of the 10 round versions of the magazine and that one fits the rifle without any problems. It inserts easily and falls free when the magazine release is pressed.

The overall construction is excellent. It has an orange, anti-tilt follower and holes to view the approximate number of cartridges. The magazine is 3/8â longer than the previous model with the light green follower. Unfortunately, the magazine I received is missing the right forward follower stop, i.e. broken off. The stop is about half the size of the model with the light green follower and may be an indication of a design flaw that makes it too fragile and subject to failure.

Returned for credit.

They fall out (07.10.2018)

I bought 3 of these mags FOR AN AR-10. My advice...DON'T BUY THEM!!!

Your wasting your money. When the rifle is fired they just fall out. Happens every time I pull the trigger. Then I found that I can just pull them out of the weapon without pressing the release button. At first I thought just one had the problem but after testing all 3 they all pull out with only slight effort. They all seat and the catch settles into the retaining hole but with a little pull and a wiggle they just come right out. I thought that the mag retainer had a problem so I tested all my PMAGS. Not one of them failed.

DON'T PURCHASE THEM!!!!

Solid Construction (15.02.2017)

I love this solid steel construction!!!

Satisfied (07.08.2018)

Fits great in my anodize Noreen lower. Freely drops out when called to do so. Holds bolt back on last round fires. When filled to capacity, I can push it in on a closed bolt. Good bench shooting mag. Dependable so far.

Leggi più recensioni su brownells.com

37.9 39.9 2 CHF

N. prodotto: 100023925
D&H INDUSTRIES SR25 PATTERN 308 STEEL MAGAZINE 20RD BLACK
Parti Fabbricante: DHT-11848-RT 850012639183 SR25 modello 308 Magazine camerata in calibro. 308. Il rivista corpo è realizzato in acciaio e disponibili in 10 (Orange seguace) o 20 (Green seguace) Arrotonda.

37.9 CHF 219 CHF 37.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR .308 Capacità: 20-colpi Cartuccia: 308 Winchester Finitura: Nero Materiale: Acciaio Quantità: 1

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Restrizioni

Permesso d'acquisto di caricatori ad alta capacità (Copia dell'autorizzazione eccezionale o conferma di possesso d'arma Cantonale)

Caratteristiche

Adatto per: AR .308 Capacità: 20-colpi Cartuccia: 308 Winchester Finitura: Nero Materiale: Acciaio Peso della spedizione: 0.236kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.d

N. prodotto: 100022696
D&H INDUSTRIES 6.5 CREEDMOOR/.308 MAGAZINE 10-RD STEEL BLACK
Parti Fabbricante: DHT-12132-RT 766897411304 SR25 modello 308 Magazine camerata in calibro. 308. Il rivista corpo è realizzato in acciaio e disponibili in 10 (Orange seguace) o 20 (Green seguace) Arrotonda.

39.9 CHF 28 CHF 39.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR .308 Capacità: 10-colpi Cartuccia: 308 Winchester Finitura: Nero Materiale: Acciaio Quantità: 1

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.

Altro...

SR25 modello 308 Magazine camerata in calibro. 308. Il rivista corpo è realizzato in acciaio e disponibili in 10 (Orange seguace) o 20 (Green seguace) Arrotonda.

Altro...

Punteggi dei clienti per D&H INDUSTRIES SR25 PATTERN 308 STEEL MAGAZINE 20RD BLACK

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 3.8

Works fine in my PA-10 gen2 (28.12.2017)

works in Galil ACE and PSA G2 in 7.62x51 (17.03.2018)

If you want steel feed lips the D&H 20rd mag is 7 oz and Lancer LWM 20rd is 6 oz.

D&H has functioned fine and is half the cost of a Lancer mag.

awesome mags ! (09.04.2018)

Great but with a hitch (25.04.2018)

Does Not Fit DPMS RFLR G2B24 (28.04.2018)

They fall out (07.10.2018)

Solid Construction (15.02.2017)

I love this solid steel construction!!!

Satisfied (07.08.2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie

LANCER SYSTEMS L7AWM 20RD TRANSLUCENT SMOKE
AR 308 L7AWM TRANSLUCENT SMOKE 20-RD MAGAZINES

LANCER SYSTEMS

In magazzino

CHF 74.90 * CHF 74.90 - CHF 662.30*

Caricatori | Magazines

Sale

MAGPUL AR-15 PMAG GEN M3 MAGAZINE 223/5.56 30RD POLYMER BLACK 1PK
AR-15 30RD PMAG GEN M3 MAGAZINE 223/5.56

MAGPUL

In magazzino

CHF 25.40 * CHF 28.90 - CHF 2'099.90*

(Seleziona articoli in saldo!)

Prezzo vecchio CHF 29.90

Caricatori | Magazines

4.1

Sale

MAGPUL AR .308 PMAG LR/SR GEN M3 WINDOW MAG 308 WIN 25RD BLK
AR .308 25RD PMAG LR/SR GEN M3 WINDOW MAGAZINE 308 WINCHESTER

MAGPUL

In magazzino

CHF 33.10 *

Prezzo vecchio CHF 38.90

Caricatori | Magazines

4.7

AERO PRECISION AR-15 LOW PROFILE ADJUSTABLE GAS BLOCK .750 BLACK
AR-15 LOW PROFILE ADJUSTABLE GAS BLOCKS

AERO PRECISION

Riordinato

CHF 104.90 *

Gas block

PHASE 5 TACTICAL EBRV2/308 EXTENDED BOLT RELEASE
308 AR V2 EXTENDED BOLT RELEASE

PHASE 5 TACTICAL

In magazzino

CHF 99.90 *

4.1

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.