Ihr Warenkorb ist leer.

Warenkorb

BRAVO COMPANY
AR-15 BCMGUNFIGHTER™ PNT TRIGGER

812526020451 100018632

The BCM® PNT™ Trigger and Hammer are built to surpass Mil-Spec standards without compromising the reliability of the USGI TDP(Technical Data Package). Each PNT Trigger and Hammer is heat treated in a three step process and hardened for optimal grain structure alignment, surpassing commercial "equivalents" in both durability and performance. To create a perfect alignment and smooth trigger pull, the BCM PNT Trigger and Hammer bores are honed to perfection and the impact resistant trigger and hammer pins are centerless ground to a fine finish with superior tolerances. The BCM Disconnector is stamped from 1070 material and fine blanked for cleaner edges and double disc ground to precise size to ensure consistent and reliable operation. Hand polished sear engagement surfaces reduce friction an additional 300% beyond the Mil-Spec. An electroless nickel finish reduces felt creep and cleans up the grittiness commonly associated with the press in a Mil-Spec trigger. Teflon particles embedded in the nickel, further reduce friction in the interface and double down on a finish that is corrosion, rust and oxidation resistant.

Will not work with Colt Large Pin Hammer & Trigger Hole Lower.

Mehr...

Der BCM® PNT ™ -Trigger und -Hammer wurden so konstruiert, dass sie die Mil-Spec-Standards übertreffen, ohne die Zuverlässigkeit des USGI TDP (Technical Data Package) zu beeinträchtigen. Jeder PNT-Auslöser und Hammer wird in einem dreistufigen Prozess wärmebehandelt und für eine optimale Ausrichtung der Kornstruktur gehärtet. Dies übertrifft die kommerziellen "Äquivalente" in Bezug auf Haltbarkeit und Leistung. Um eine perfekte Ausrichtung und einen gleichmässigen Abzug zu erzielen, werden die BCM PNT-Abzugs- und Hammerbohrungen bis zur Perfektion geschliffen und die stossfesten Abzugs- und Hammerstifte werden spitzenlos geschliffen, um ein feines Finish mit überlegenen Toleranzen zu erzielen. Der BCM-Trennschalter ist aus 1070-Material gestanzt und für sauberere Kanten und Doppelscheibenschliff auf eine präzise Grösse feingeschliffen, um einen gleichmässigen und zuverlässigen Betrieb zu gewährleisten. Handpolierte Sear-Eingriffsflächen reduzieren die Reibung zusätzlich um 300% über die Mil-Spec hinaus. Ein chemisch Nickel-Finish reduziert das Kriechen des Filzes und beseitigt die bei einem Mil-Spec-Abzug häufig auftretenden Verschmutzungen. In das Nickel eingebettete Teflonpartikel verringern die Reibung an der Grenzfläche und verdoppeln sich auf einer Oberfläche, die korrosions-, rost- und oxidationsbeständig ist.

Funktioniert nicht mit Colt Large Pin Hammer & Trigger Hole Lower.

Mehr...

Kundenbewertungen zu BRAVO COMPANY PNT TRIGGER

Anzahl der Bewertungen: 15
Von brownells.com: 15
Durchschnittliche Bewertung: 4.8

Good value for the money (19.01.2016)

Noticeably smoother pull and crisper break than standard MIL Spec trigger for only a few more dollars. This is a great way to upgrade for a low cost or to put in your build.

Excellent product! (20.01.2016)

Great option from budget to dream gun. Slick nickel surface for easy cleaning and corrosion protection. Clean break with zero creep. Great trigger at a great price!

Serviceable trigger for duty use (04.02.2016)

Real nice trigger for the money. Way better than milspec with a clean 6lb brake and very positive reset. BCM trigger replaced the nasty stock trigger in my Sig 516 patrol rifle.

Best dollar value AR trigger (07.04.2016)

For non-competitors, this is the perfect trigger upgrade. After only 40 or 50 hammer block dry fires, the pull is smooth as glass, then breaks crisply. With just a touch of Brownell's Action Magic on all contact surfaces, pull is consistent 5 lb. Geissele's BG2S-E has been my 'best value upgrade' 'til now, but this PNT gives me at least 80% of the BG2S-E's improvement (over a stock GI trigger) for a third the cost.

better than any i have tried (06.05.2016)

just couldn't pay the money for a decent 2 stage so I took a shot in the dark and ordered this bravo trigger group instead. 5 minutes to install and the shot breaks like glass. no pull gauge but estimate well below 5#.

could be due to the super fine finish on the mating surface. will be ordering the same unit for my next build.

Worth the money. (11.09.2016)

Really good trigger for the money. Trigger pull gauge shows around 5 1/2 pounds, with no creep or grittiness.

Impressive (07.10.2016)

My comments here are basically on installation. It was a breeze. I pulled the trigger pin out of the trigger and disconnector and by hand inserted the trigger, disconnector, and pushed the pin through the lower receiver. No tools, hammer, etc. On the hammer I did insert a punch pin from the right side to hold the hammer in place. I then used hand pressure and jiggling to push the hammer pin through the hammer and the lower receiver. Only about 1/8" of the pin stuck out and I used a plastic marker pen and brass hammer to set it flush. No scratch marks on the LR. Using a dummy round I tested the trigger pull and it feels smooth. I was impressed with the quality. All springs are pre-assembled and in place. The trigger and hammer pins are inserted as in the picture.

Excellent AR Trigger (09.11.2016)

I used this trigger in my AR-15 300 Blackout build. Fantastic trigger, great function and solid. While a drop-in trigger would have been nice, this one is smooth, clean, and breaks well. If you are building a mil-spec rifle this is a great trigger.

You will be very pleased and then some. (29.11.2016)

I've bought several of these for my builds and you can't go wrong. A fantastic trigger for the price and don't shy away because of that. No cons to this trigger at all.

My wife prefers this to the G2S! (16.05.2017)

Trigger is impressive, think of it as a step up from a ALG Defense ACT halfway between that and the Geissele 2 stage. The BCM PNT is very clean, very crisp, and has a 5-6 lb pull. I was blown away at how good it is for the cost, minimal first stage that is barely noticeable, then a nice break. Crisp hard reset. Would definitely buy again.

Great Combat Trigger (27.05.2017)

I don't want to carry a carbine with too light a trigger. Just in case the shooting goes to court.

What I want is a trigger that is breaks clean and has no creep or grittiness.

And this BCM offers all that.

Was easy to install.

Love this trigger (04.07.2017)

Love this trigger. Everything about it is SMOOTH. Every build from now on will have this.

Good for the money, otherwise just ok (30.08.2017)

I own four BCMs that came with this trigger, partially thanks to Brownells and there 10% off sales that compelled me to buy some of them. I swapped every trigger for Geissele SSAs. It's not that this isn't a fine OEM trigger, but it's still too heavy and creepy for my tastes. Caveat: I'm not a tactical guy. I shoot for the love of guns and joy of shooting...but my home defense BCM ELW has a Geissele 2-stage. Again, it's a fine trigger, and easy to sell to help defray the cost of the Geissele, and if you like a quality, heavy trigger that's a cut above MILSPEC, this is a good one.

A good trigger (16.06.2018)

If you want the Executive Summary, this is a 5 Star GI Trigger that is a 3 Star Value at its price.

I bought a Colt 6920 and it had such a terrible trigger, it was hard to shoot decent groups. I donât have the spare cash right now for a Geissele SSA and really a M4 type rifle doesnât need one anyway. This trigger had the best reviews of the Enhanced GI triggers and the cost were all similar among the various ALG and the BCM so I felt most comfortable with this option.

I donât have a trigger pull gauge, but this is a good single stage GI trigger that transformed my rifle and it is now easy to shoot acceptable groups at the range. My only problem with all these triggers is that they should probably all sell for about $30. The last two lowers I built using DPMS and an old Stag LPK both have very acceptable triggers. The BCM is a little better, but it cost more than either LPK for just the trigger.

Iâve heard good things about PSAâs $30 EPT Trigger and will pick one up the next time I see one on sale to compare the two.

Best for the money (22.09.2018)

Trigger is built well and machine work is high quality. Zero issues with fit or finish. Trigger pull is heavier than I like and this isn't a >$100 trigger so I was prepared for that. Trigger reset is basically the full length trigger pull, no advantages here. Pull is steady & smooth - no grit - crisp break. Better by far when compared to unpolished, coated, mil-spec. Great mid-tier trigger that works as it should and will last.

Lesen Sie 15 weitere Bewertungen bei brownells.com

104.9 104.9 1 CHF

Artikel-Nr.: 100018632
BRAVO COMPANY PNT TRIGGER
Herstellerproduktnummer: BCMPNTTA1 812526020451 Der BCM® PNT ™ -Trigger und -Hammer wurden so konstruiert, dass sie die Mil-Spec-Standards übertreffen, ohne die Zuverlässigkeit des USGI TDP (Technical Data Package) zu beeinträchtigen. Jeder PNT-Auslöser und Hammer wird in einem dreistufigen Prozess wärmebehandelt und für eine optimale Ausrichtung der Kornstruktur gehärtet. Dies übertrifft die kommerziellen "Äquivalente" in Bezug auf Haltbarkeit und Leistung. Um eine perfekte Ausrichtung und einen gleichmässigen Abzug zu erzielen, werden die BCM PNT-Abzugs- und Hammerbohrungen bis zur Perfektion geschliffen und die stossfesten Abzugs- und Hammerstifte werden spitzenlos geschliffen, um ein feines Finish mit überlegenen Toleranzen zu erzielen. Der BCM-Trennschalter ist aus 1070-Material gestanzt und für sauberere Kanten und Doppelscheibenschliff auf eine präzise Grösse feingeschliffen, um einen gleichmässigen und zuverlässigen Betrieb zu gewährleisten. Handpolierte Sear-Eingriffsflächen reduzieren die Reibung zusätzlich um 300% über die Mil-Spec hinaus. Ein chemisch Nickel-Finish reduziert das Kriechen des Filzes und beseitigt die bei einem Mil-Spec-Abzug häufig auftretenden Verschmutzungen. In das Nickel eingebettete Teflonpartikel verringern die Reibung an der Grenzfläche und verdoppeln sich auf einer Oberfläche, die korrosions-, rost- und oxidationsbeständig ist.

104.9 CHF 71 CHF 104.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Art: Single-Stage Hersteller/Modell: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Art: Single-Stage Hersteller/Modell: AR-15 Versandgewicht: 0.045kg Versandhöhe: 38mm Versandbreite: 108mm Versandlänge: 178mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.c

Will not work with Colt Large Pin Hammer & Trigger Hole Lower.

Mehr...

Funktioniert nicht mit Colt Large Pin Hammer & Trigger Hole Lower.

Mehr...

Kundenbewertungen zu BRAVO COMPANY PNT TRIGGER

Anzahl der Bewertungen: 15
Von brownells.com: 15
Durchschnittliche Bewertung: 4.8

Good value for the money (19.01.2016)

Noticeably smoother pull and crisper break than standard MIL Spec trigger for only a few more dollars. This is a great way to upgrade for a low cost or to put in your build.

Excellent product! (20.01.2016)

Great option from budget to dream gun. Slick nickel surface for easy cleaning and corrosion protection. Clean break with zero creep. Great trigger at a great price!

Serviceable trigger for duty use (04.02.2016)

Real nice trigger for the money. Way better than milspec with a clean 6lb brake and very positive reset. BCM trigger replaced the nasty stock trigger in my Sig 516 patrol rifle.

Best dollar value AR trigger (07.04.2016)

better than any i have tried (06.05.2016)

Worth the money. (11.09.2016)

Really good trigger for the money. Trigger pull gauge shows around 5 1/2 pounds, with no creep or grittiness.

Impressive (07.10.2016)

Excellent AR Trigger (09.11.2016)

You will be very pleased and then some. (29.11.2016)

I've bought several of these for my builds and you can't go wrong. A fantastic trigger for the price and don't shy away because of that. No cons to this trigger at all.

My wife prefers this to the G2S! (16.05.2017)

Great Combat Trigger (27.05.2017)

Love this trigger (04.07.2017)

Love this trigger. Everything about it is SMOOTH. Every build from now on will have this.

Good for the money, otherwise just ok (30.08.2017)

A good trigger (16.06.2018)

Best for the money (22.09.2018)

Lesen Sie 15 weitere Bewertungen bei brownells.com

Kunden kauften auch

MAGPUL MOE K2 GRIP POLYMER BLACK
AR-15 MOE K2 GRIP

MAGPUL

Auf Lager

CHF 29.90 *

Pistolengriffe

4.5

RADIAN WEAPONS AR-15 RAPTOR-LT AMBIDEXTROUS CHARGING HANDLE BLACK
AR-15 RAPTOR-LT CHARGING HANDLE 5.56

RADIAN WEAPONS

Auf Lager

CHF 114.90 * CHF 114.90 - CHF 134.90*

Ladehebel

SPIKES TACTICAL AR-15 GAS TUBE MELONITE MID-LENGTH
AR-15 GAS TUBE MELONITE

SPIKES TACTICAL

Nachbestellt

CHF 29.90 * CHF 29.90 - CHF 36.90*

Gaszylinder

4.1

MAGPUL AR-15 CTR STOCK COLLAPSIBLE MIL-SPEC BLK
AR-15 CTR STOCK COLLAPSIBLE MIL-SPEC

MAGPUL

Auf Lager

CHF 89.90 *

Hinterschäfte

4.8

MAGPUL AR-15 PMAG GEN M2 MOE MAG 223/5.56 30RD POLYMER BLACK
AR-15 30RD PMAG GEN M2 MOE MAGAZINE 223/5.56

MAGPUL

Auf Lager

CHF 23.90 * CHF 23.90 - CHF 1'599.90*

Magazine | Magazines

4.8

Anmeldung

Kennwort vergessen?
Registrieren

SOCIAL MEDIA

Facebook

BROWNELLS.CH

PRODUKTKATEGORIEN

BESTELLEN

Kundenservice

Willkommen!

Willkommen bei brownells.ch, dem führenden Händler von Waffenteilen, Zubehör, Accessoires und Werkzeugen für Waffen in der Svizzera!

Unsere Serviceleistungen

Wenn Sie Schiessen und das Arbeiten mit Waffen mögen, ganz gleich ob als Hobby oder beruflich oder einfach nur ein Waffenbesitzer sind, bei uns sind Sie richtig!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Bastler, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertige Waffenteilen und dem Zubehör von Brownells Svizzera. Sie finden bei uns mehr als 50.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchensenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Aufrüstung Ihrer Waffen.