Convenient “Go/No-Go” gauge lets you quickly and accurately check for correct feed lip gap. Helps ensure reliable feeding and prevent weapon failure caused by feed problems. Simply slip over the back of a suspect magazine and lightly press gauge between magazine feed lips. If the gauge passes through feed lips, either discard that magazine or use the Brownells Magazine Feed Lip Tool (available separately) to bring them back into specs and restore reliable feeds. If the gauge won’t pass through the lips, the gap is too narrow and must be widened. Machined from 4140 chrome-moly steel heat hardened to Rc 50-55 for dimensional stability, plus resistance to wear and corrosion.
SPECS: 4140 chrome-moly heat treated steel, in-the-white. Rc 52-60. Go: .454" No-Go: .476". For use on standard .223/5.56mm magazines only.
Plus...
Assurer la bonne fiche pour l'alimentation des munitions fiable
Commode "Go/No-Go" jauge permet de que vous vérifiez rapidement et avec précision pour écart de lèvre alimentation correcte. Aide à assurer une alimentation fiable et prévenir une arme défaillance causée par des problèmes de l'alimentation. Simplement glisser sur le dos d'un suspect magazine et légèrement la jauge de presse entre la bouche d'alimentation magazine. Si la jauge passe dans la bouche d'alimentation, soit ignorer que le magazine ou utilisez l'outil de le lèvre Feed Brownells Magazine (disponible séparément) pour les ramener dans la fiche et restaurer RSS fiables. Si la jauge ne passera pas à travers les lèvres, l'écart est trop restrictive et doit être élargi. Usiné à partir du chrome-moly 4140 chaleur en acier durci à Rc 50-55 pour la stabilité dimensionnelle, plus la résistance à l'usure et la corrosion.
SPECS : chrome-moly 4140 thermotraité acier, dans-le-blanc. RC 52-60. Aller:. 454" no-Go:. 476". Pour une utilisation sur les magazines.223/5.56mm standard seulement.
Plus...
Évaluations client de BROWNELLS AR-15 MAGAZINE LIP GAUGE
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 4
Easy to use field gauge for STANAG magaz(14.07.2012)
This feedlip gauge is based on the gauge developed by the US Army. The drawing and dimensions for the gauge are available online so you could make your own using the right machine shop. The gauge essentially starts with a large dimension (marked NO GO) which tapers down to a smaller dimension (marked GO). If the smaller dimension (GO) fits through the feedlips but stops before the larger dimension slips through, this magazine is good. If the larger dimension fits right through the feed lips, the lips need to be adjusted down to tighten that clearance.
I had two Bravo Company Teflon coated magazines give me issues at the range. They were difficult to load using the MagLula and often did not want to feed the first round into the chamber. The cartridges felt very tight in the magazine. I gauged these mags and found the feedlips to barely allow the GO gauge to slip through. The best magazines I own are a set of dry-film D&H Industries magazines and their feedlips barely allowed the NO GO portion to fit through, so the lips were essentially getting close to being loose.
Overall: 4/5 stars, kind of pricey but it is an easy way to check the feed lips on your magazines. I was able to identify the tight magazines and fix them using the Brownells feed lip tool.
Référence: 080000744 BROWNELLS AR-15 MAGAZINE LIP GAUGE050806109902 Commode "Go/No-Go" jauge permet de que vous vérifiez rapidement et avec précision pour écart de lèvre alimentation correcte. Aide à assurer une alimentation fiable et prévenir une arme défaillance causée par des problèmes de l'alimentation. Simplement glisser sur le dos d'un suspect magazine et légèrement la jauge de presse entre la bouche d'alimentation magazine. Si la jauge passe dans la bouche d'alimentation, soit ignorer que le magazine ou utilisez l'outil de le lèvre Feed Brownells Magazine (disponible séparément) pour les ramener dans la fiche et restaurer RSS fiables. Si la jauge ne passera pas à travers les lèvres, l'écart est trop restrictive et doit être élargi. Usiné à partir du chrome-moly 4140 chaleur en acier durci à Rc 50-55 pour la stabilité dimensionnelle, plus la résistance à l'usure et la corrosion.
84.9CHF4CHF 84.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Convenient “Go/No-Go” gauge lets you quickly and accurately check for correct feed lip gap. Helps ensure reliable feeding and prevent weapon failure caused by feed problems. Simply slip over the back of a suspect magazine and lightly press gauge between magazine feed lips. If the gauge passes through feed lips, either discard that magazine or use the Brownells Magazine Feed Lip Tool (available separately) to bring them back into specs and restore reliable feeds. If the gauge won’t pass through the lips, the gap is too narrow and must be widened. Machined from 4140 chrome-moly steel heat hardened to Rc 50-55 for dimensional stability, plus resistance to wear and corrosion.
SPECS: 4140 chrome-moly heat treated steel, in-the-white. Rc 52-60. Go: .454" No-Go: .476". For use on standard .223/5.56mm magazines only.
Plus...
Assurer la bonne fiche pour l'alimentation des munitions fiable
Commode "Go/No-Go" jauge permet de que vous vérifiez rapidement et avec précision pour écart de lèvre alimentation correcte. Aide à assurer une alimentation fiable et prévenir une arme défaillance causée par des problèmes de l'alimentation. Simplement glisser sur le dos d'un suspect magazine et légèrement la jauge de presse entre la bouche d'alimentation magazine. Si la jauge passe dans la bouche d'alimentation, soit ignorer que le magazine ou utilisez l'outil de le lèvre Feed Brownells Magazine (disponible séparément) pour les ramener dans la fiche et restaurer RSS fiables. Si la jauge ne passera pas à travers les lèvres, l'écart est trop restrictive et doit être élargi. Usiné à partir du chrome-moly 4140 chaleur en acier durci à Rc 50-55 pour la stabilité dimensionnelle, plus la résistance à l'usure et la corrosion.
SPECS : chrome-moly 4140 thermotraité acier, dans-le-blanc. RC 52-60. Aller:. 454" no-Go:. 476". Pour une utilisation sur les magazines.223/5.56mm standard seulement.
Plus...
Évaluations client de BROWNELLS AR-15 MAGAZINE LIP GAUGE
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 4
Easy to use field gauge for STANAG magaz(14.07.2012)
This feedlip gauge is based on the gauge developed by the US Army. The drawing and dimensions for the gauge are available online so you could make your own using the right machine shop. The gauge essentially starts with a large dimension (marked NO GO) which tapers down to a smaller dimension (marked GO). If the smaller dimension (GO) fits through the feedlips but stops before the larger dimension slips through, this magazine is good. If the larger dimension fits right through the feed lips, the lips need to be adjusted down to tighten that clearance.
I had two Bravo Company Teflon coated magazines give me issues at the range. They were difficult to load using the MagLula and often did not want to feed the first round into the chamber. The cartridges felt very tight in the magazine. I gauged these mags and found the feedlips to barely allow the GO gauge to slip through. The best magazines I own are a set of dry-film D&H Industries magazines and their feedlips barely allowed the NO GO portion to fit through, so the lips were essentially getting close to being loose.
Overall: 4/5 stars, kind of pricey but it is an easy way to check the feed lips on your magazines. I was able to identify the tight magazines and fix them using the Brownells feed lip tool.