For Convenient Mounting Of Auxiliary Optics, Lights & Other Accessories
Lightweight, low-profile, rail clamps to handguard side rail to allow easy off-axis mounting of red dot sights in the 1:00 or 11:00 position. Lets operator transition almost instantly from long-range primary optic to non-magnified CQB sight without breaking cheekweld. Viewing tunnel through the mount helps minimize obstruction of operator’s view of area around the target. Plenty of other uses, too; clamps to any MIL-STD 1913 Picatinny rail. Install on underside of handguard to position a laser or weaponlight close to vertical forend grip for easy operation of controls with support hand. Precision machined from 6061-T6 aluminum billet, then mil-spec Type III hardcoat anodized for added strength. The 1 O'Clock Offset Rail now utilizes the Daniel Defense patented Rock and Lock™ one piece mounting system, creating an even more robust and streamlined mounting surface as well as simplified installation on any MIL-STD-1913 picatinny rail.
Pour le montage pratique d'auxiliaires optiques, feux & autres accessoires
Rail léger, peu encombrant, pinces à rail latéral handguard pour permettre un montage facile hors-axe des viseurs point rouge en position 01:00 ou de 11:00. Permet de transition opérateur presque instantanément à partir de longue portée optique primaire à la vue CQB non-amplifié sans rupture de cheekweld. Regarde un tunnel traversant la montagne permet de minimiser l’obstruction de vue de l’opérateur de la zone entourant la cible. Beaucoup d’autres utilisations, aussi ; pinces à n’importe quel rail Picatinny MIL-STD 1913. Installer sur le dessous du garde-main pour positionner un laser ou un weaponlight à proximité de la poignée verticale de têtière pour une utilisation facile des contrôles avec prise en charge main. Précision usinées à partir de billettes d’aluminium 6061-T6, puis mil-spec Type III hardcoat anodisé pour ajouté la force. Le 01:00 Offset Rail utilise maintenant la Daniel défense brevetée Rock et Lock™ une pièce système de montage, la création d’une surface de montage encore plus robuste et simplifiée, mais aussi une installation simplifiée sur n’importe quel rail de picatinny MIL-STD-1913.
Évaluations client de DANIEL DEFENSE ONE O'CLOCK OFFSET RAIL
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 5
Perfect red dot mount with scope.(30.12.2009)
Perfect mount for my Burris Fastfire on my 18" SPR. Easy transition from scope at top center, over to red dot at 1:00 and back without changing cheek weld. Works better than having to raise your eye upward from the scope. Best product I have found for this application. Very good design. A winner.
Great product(06.03.2010)
Mounts solid places the sight at the proper place in reference to the scope. how could you ask for more.
Perfect mount(20.01.2013)
I've tried a couple different mounts, this super lite, very rigid mount places the RMR in exactly the right location on my AR15 and AR308 rifles. Fast transition from long glass to red dot and back to long glass again. Great job Daniel Defense!
Great buy!(05.04.2013)
I love these add-ons! Great for my backup sights and I can't wait to sight these iron sights in. They look great, fit great, and seem very durable. Great buy!
Référence: 100003943 DANIEL DEFENSE ONE O'CLOCK OFFSET RAIL Ref Fabricant: 03-029-13017852548002189 Rail léger, peu encombrant, pinces à rail latéral handguard pour permettre un montage facile hors-axe des viseurs point rouge en position 01:00 ou de 11:00. Permet de transition opérateur presque instantanément à partir de longue portée optique primaire à la vue CQB non-amplifié sans rupture de cheekweld. Regarde un tunnel traversant la montagne permet de minimiser l’obstruction de vue de l’opérateur de la zone entourant la cible. Beaucoup d’autres utilisations, aussi ; pinces à n’importe quel rail Picatinny MIL-STD 1913. Installer sur le dessous du garde-main pour positionner un laser ou un weaponlight à proximité de la poignée verticale de têtière pour une utilisation facile des contrôles avec prise en charge main. Précision usinées à partir de billettes d’aluminium 6061-T6, puis mil-spec Type III hardcoat anodisé pour ajouté la force. Le 01:00 Offset Rail utilise maintenant la Daniel défense brevetée Rock et Lock™ une pièce système de montage, la création d’une surface de montage encore plus robuste et simplifiée, mais aussi une installation simplifiée sur n’importe quel rail de picatinny MIL-STD-1913.
79.9CHF7CHF 79.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
For Convenient Mounting Of Auxiliary Optics, Lights & Other Accessories
Lightweight, low-profile, rail clamps to handguard side rail to allow easy off-axis mounting of red dot sights in the 1:00 or 11:00 position. Lets operator transition almost instantly from long-range primary optic to non-magnified CQB sight without breaking cheekweld. Viewing tunnel through the mount helps minimize obstruction of operator’s view of area around the target. Plenty of other uses, too; clamps to any MIL-STD 1913 Picatinny rail. Install on underside of handguard to position a laser or weaponlight close to vertical forend grip for easy operation of controls with support hand. Precision machined from 6061-T6 aluminum billet, then mil-spec Type III hardcoat anodized for added strength. The 1 O'Clock Offset Rail now utilizes the Daniel Defense patented Rock and Lock™ one piece mounting system, creating an even more robust and streamlined mounting surface as well as simplified installation on any MIL-STD-1913 picatinny rail.
Pour le montage pratique d'auxiliaires optiques, feux & autres accessoires
Rail léger, peu encombrant, pinces à rail latéral handguard pour permettre un montage facile hors-axe des viseurs point rouge en position 01:00 ou de 11:00. Permet de transition opérateur presque instantanément à partir de longue portée optique primaire à la vue CQB non-amplifié sans rupture de cheekweld. Regarde un tunnel traversant la montagne permet de minimiser l’obstruction de vue de l’opérateur de la zone entourant la cible. Beaucoup d’autres utilisations, aussi ; pinces à n’importe quel rail Picatinny MIL-STD 1913. Installer sur le dessous du garde-main pour positionner un laser ou un weaponlight à proximité de la poignée verticale de têtière pour une utilisation facile des contrôles avec prise en charge main. Précision usinées à partir de billettes d’aluminium 6061-T6, puis mil-spec Type III hardcoat anodisé pour ajouté la force. Le 01:00 Offset Rail utilise maintenant la Daniel défense brevetée Rock et Lock™ une pièce système de montage, la création d’une surface de montage encore plus robuste et simplifiée, mais aussi une installation simplifiée sur n’importe quel rail de picatinny MIL-STD-1913.
Évaluations client de DANIEL DEFENSE ONE O'CLOCK OFFSET RAIL
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 5
Perfect red dot mount with scope.(30.12.2009)
Perfect mount for my Burris Fastfire on my 18" SPR. Easy transition from scope at top center, over to red dot at 1:00 and back without changing cheek weld. Works better than having to raise your eye upward from the scope. Best product I have found for this application. Very good design. A winner.
Great product(06.03.2010)
Mounts solid places the sight at the proper place in reference to the scope. how could you ask for more.
Perfect mount(20.01.2013)
I've tried a couple different mounts, this super lite, very rigid mount places the RMR in exactly the right location on my AR15 and AR308 rifles. Fast transition from long glass to red dot and back to long glass again. Great job Daniel Defense!
Great buy!(05.04.2013)
I love these add-ons! Great for my backup sights and I can't wait to sight these iron sights in. They look great, fit great, and seem very durable. Great buy!