Offsets Add-On Tactical Accessories For Unobstructed Use Of Primary Sights
Low-profile, add-on rail lets you mount a flashlight, laser, red dot sight, or other tactical accessory at a 45° angle, so it s close to the rifle s center line without obstructing your primary sight system. Precision-machined aluminum body uses a full-length steel clamping bar and thr ee hardened steel socket head bolts to anchor the mount securely to any Picatinny rail with minimal weight increase to your weapon. Five cross-slots; accepts Picatinny and Weaver-style accessories.
SPECS: Aluminum, anodized, matte black finish. 2-1⁄8 (5.4cm) long, 1-7⁄8 (4.8cm) wide, 11⁄16 (1.8cm) high. 2.3 oz. (66g) wt.
Plus...
Décale le module tactique accessoires pour une utilisation libre des principaux sites touristiques
Profil bas, rail le module vous permet de monter une lampe de poche, laser, viseur point rouge ou autre accessoire tactique à un angle de 45°, donc il s près de la ligne de centre s fusil sans empêcher votre système de vue primaire. Corps en aluminium usinées avec précision utilise une barre pleine longueur de serrage en acier et thr ee durci les boulons à tête Douille acier pour ancrer la monture solidement à n'importe quel rail Picatinny avec augmentation de la masse minimale à votre arme. Cinq croix-fentes ; accepte accessoires Picatinny et Weaver-style.
Évaluations client de DOUBLE STAR 45 DEGREE DOVETAIL ANGLE MOUNT
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4
Good First Impression(16.11.2009)
I received this item today and mounted it to the single rail that is on top of the gas block on my DPMS 223 16" SS Bull BBL flat top upper. I was concerned that item such as lights mounted on this gas block would interfere with the 3 x 9 Burris scope I have mounted in low rings on the flat top upper. With my Surefire light mounted at the 45 degree angle this item provides there is no interference with the scopes field of view. The fit and finish of the 45 degree angle mount seems quite good and it took all of 30 seconds to mount. I would make sure you have enough rail and grooves for all three screws to each have a slot of their own.
Rock Solid(19.01.2012)
You can hang off your gun by it!
not suitable for sights(25.02.2012)
beautifully made, but contrary to writeup, not suitable for a sight unless used only at one distance. The centerline of the angle is not in line with an AR barrel. Consequently, if you sight in at a particular range, the paralax error will put the sight significantly off at any other range. Compare it to the "designed for AR" angled backup iron sights and you will see that the sights are much lower on the side of the rifle and a perpendicular line from the center of the sight pad will intersect the center of the barrel. This angle mount would be teriffic for a light and is very well made and compact--just isn't good for mounting a sight.
Great product(14.03.2013)
I purchased 2 of these to mount magpul sights on a AR-15 as back up sights. They work great and are just the right length to provide protection for the sights. Good solid product.
Référence: 100003301 DOUBLE STAR 45 DEGREE DOVETAIL ANGLE MOUNT Ref Fabricant: DS785841348104483 Profil bas, rail le module vous permet de monter une lampe de poche, laser, viseur point rouge ou autre accessoire tactique à un angle de 45°, donc il s près de la ligne de centre s fusil sans empêcher votre système de vue primaire. Corps en aluminium usinées avec précision utilise une barre pleine longueur de serrage en acier et thr ee durci les boulons à tête Douille acier pour ancrer la monture solidement à n'importe quel rail Picatinny avec augmentation de la masse minimale à votre arme. Cinq croix-fentes ; accepte accessoires Picatinny et Weaver-style.
43.9CHF0CHF 43.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Offsets Add-On Tactical Accessories For Unobstructed Use Of Primary Sights
Low-profile, add-on rail lets you mount a flashlight, laser, red dot sight, or other tactical accessory at a 45° angle, so it s close to the rifle s center line without obstructing your primary sight system. Precision-machined aluminum body uses a full-length steel clamping bar and thr ee hardened steel socket head bolts to anchor the mount securely to any Picatinny rail with minimal weight increase to your weapon. Five cross-slots; accepts Picatinny and Weaver-style accessories.
SPECS: Aluminum, anodized, matte black finish. 2-1⁄8 (5.4cm) long, 1-7⁄8 (4.8cm) wide, 11⁄16 (1.8cm) high. 2.3 oz. (66g) wt.
Plus...
Décale le module tactique accessoires pour une utilisation libre des principaux sites touristiques
Profil bas, rail le module vous permet de monter une lampe de poche, laser, viseur point rouge ou autre accessoire tactique à un angle de 45°, donc il s près de la ligne de centre s fusil sans empêcher votre système de vue primaire. Corps en aluminium usinées avec précision utilise une barre pleine longueur de serrage en acier et thr ee durci les boulons à tête Douille acier pour ancrer la monture solidement à n'importe quel rail Picatinny avec augmentation de la masse minimale à votre arme. Cinq croix-fentes ; accepte accessoires Picatinny et Weaver-style.
Évaluations client de DOUBLE STAR 45 DEGREE DOVETAIL ANGLE MOUNT
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4
Good First Impression(16.11.2009)
I received this item today and mounted it to the single rail that is on top of the gas block on my DPMS 223 16" SS Bull BBL flat top upper. I was concerned that item such as lights mounted on this gas block would interfere with the 3 x 9 Burris scope I have mounted in low rings on the flat top upper. With my Surefire light mounted at the 45 degree angle this item provides there is no interference with the scopes field of view. The fit and finish of the 45 degree angle mount seems quite good and it took all of 30 seconds to mount. I would make sure you have enough rail and grooves for all three screws to each have a slot of their own.
Rock Solid(19.01.2012)
You can hang off your gun by it!
not suitable for sights(25.02.2012)
beautifully made, but contrary to writeup, not suitable for a sight unless used only at one distance. The centerline of the angle is not in line with an AR barrel. Consequently, if you sight in at a particular range, the paralax error will put the sight significantly off at any other range. Compare it to the "designed for AR" angled backup iron sights and you will see that the sights are much lower on the side of the rifle and a perpendicular line from the center of the sight pad will intersect the center of the barrel. This angle mount would be teriffic for a light and is very well made and compact--just isn't good for mounting a sight.
Great product(14.03.2013)
I purchased 2 of these to mount magpul sights on a AR-15 as back up sights. They work great and are just the right length to provide protection for the sights. Good solid product.