Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
513030740
Alter Choke Constriction Without Changing The Choke
High-quality reamer made by Dave Manson. Lets you easily add some choke constriction to a shortened or standard length barrel without threading or altering the actual choke. Just stop reaming 2" to 3" short of the muzzle and the difference in diameter between the bore and the muzzle is the degree of choke. Tightens chokes on barrels that are too thin for screw-in tubes. Plus, full-length back boring can restore the interior surface of rusted and pitted barrels to "like new" far more quickly than polishing or stoning.

SPECS: M7 high speed steel. 5" (12.7cm) long with eight straight flutes. 12 gauge only.

234.9 234.9 1 CHF
Référence: 513030740
MANSON PRECISION .740" 12 GA. REAMER
Ref Fabricant: BR12GA740 Alésoir de qualité faite par Dave Manson. Vous permet de qu'aisément ajouter certains Starter constriction d'un canon de longueur raccourcie ou standard sans filetage ou altérant le starter réel. Arrêt juste Ebavurage 2 « à 3" court le museau et la différence de diamètre entre l'alésage et le museau est le degré de l'artichaut. Resserre les selfs sur barils qui sont trop minces pour visser les tubes. De plus, pleine longueur dos ennuyeux peut restaurer la surface intérieure des fûts rouillés et piquées « comme neuf » beaucoup plus rapidement que le polissage ou la lapidation.
234.9 CHF 0 CHF 234.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Calibre: 12 Gauge Style: Réduction de Calibre

Caractéristiques

Calibre: 12 Gauge Style: Réduction de Calibre Poids du colis: 0.159kg Hauteur d'expédition: 28mm Largeur d'expédition: 28mm Longueur d'expédition: 155mm

Détails de l'article

Fabriqué au USA



Alter Choke Constriction Without Changing The Choke
High-quality reamer made by Dave Manson. Lets you easily add some choke constriction to a shortened or standard length barrel without threading or altering the actual choke. Just stop reaming 2" to 3" short of the muzzle and the difference in diameter between the bore and the muzzle is the degree of choke. Tightens chokes on barrels that are too thin for screw-in tubes. Plus, full-length back boring can restore the interior surface of rusted and pitted barrels to "like new" far more quickly than polishing or stoning.

SPECS: M7 high speed steel. 5" (12.7cm) long with eight straight flutes. 12 gauge only.

Newsletter