Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz
080800902
Extra Surface Area Gives Tremendous Power To Clamp Hold & Even The Tightest Barrel
To compliment our "Ring-Of-Steel" Action Wrench System, we've developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for increased durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive, four cap screw system and the extra-wide design generates so much holding force, Brownells Barrel Vise must be firmly bolted to the stoutest bench or immovable base to fully realize its greatest potential. Aluminum, split barrel bushings come in eight different hole sizes and one, special, pre-machined bushing to make this universal Barrel Vise system the very first choice of professional gunsmit hs. Steel Bushings provide years of service, plus have the necessary clamping power to break loose the tightest barrels. Aluminium Bushings give exceptional holding ability without marking your barrel. Allen Head Bolt Kit - ½"-20 tpi x 2" long. Used to hold Top and Bottom Blocks together. Kit includes four bolts and the correct, 3⁄8" Allen wrench for these bolts.

SPECS: Blocks - Steel, blued. Top Block; 4½" (11.4cm) x 3" (7.6cm) x 1½" (3.8cm). Bottom Block; 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish. 6160 aluminum, natural finish. #4, 7, 8, 9, 10 and 11 are in a range of I.D.'s to closely match the shank diameters of most rifle barrels. #5 Bushing; fits military Mauser 98 barrels. #6 Bushing tapered to fit Remington Factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy barrels on M1A/M14's and M1 Garand's. All bushings 3" long, 1¾" diameter. Barrel Vise Set comes complete with seven bushings (#5, 12 & 13 NOT included).

16.9 16.9 1 CHF
Artikel-Nr.: 080800902
BROWNELLS BARREL VISE ALLEN HEAD BOLT KIT Als Ergänzung zu unserem "Ring-Of-Steel" -Aktionsschlüssel-System haben wir den einzigen Laufschraubstock in Profiqualität entwickelt, der selbst den engsten Lauf beim Entfernen sicher klemmt und daran hindert, sich zu drehen. Gefertigt aus massivem Stahl für eine längere Haltbarkeit, um die Montage- und Demontageanforderungen jedes Büchsenmachers über Jahre hinweg zu erfüllen. Unser exklusives Vierkopfschraubensystem und das extrabreite Design erzeugen so viel Haltekraft, dass der Brownells-Schraubstock fest mit der stabilsten Bank oder der unbeweglichen Basis verschraubt werden muss, um sein grösstes Potenzial voll auszuschöpfen. Geteilte Aluminium-Laufbuchsen sind in acht verschiedenen Lochgrössen und einer speziellen, vorbearbeiteten Buchse erhältlich, um dieses universelle Laufschraubsystem zur ersten Wahl für professionelle Geschütze zu machen. Stahlbuchsen bieten jahrelange Lebensdauer und verfügen über die erforderliche Spannkraft, um die engsten Läufe zu lösen. Aluminiumbuchsen bieten aussergewöhnliche Halteeigenschaften, ohne dass Ihr Lauf beschädigt wird. Inbusschraubensatz - ½ "-20 tpi x 2" lang. Dient zum Zusammenhalten der oberen und unteren Blöcke. Das Kit enthält vier Schrauben und den richtigen 3⁄8 "Inbusschlüssel für diese Schrauben.
16.9 CHF 1 CHF 16.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften

Versandgewicht: 0.295kg Versandhöhe: 25mm Versandbreite: 81mm Versandlänge: 137mm




Extra Surface Area Gives Tremendous Power To Clamp Hold & Even The Tightest Barrel
To compliment our "Ring-Of-Steel" Action Wrench System, we've developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for increased durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive, four cap screw system and the extra-wide design generates so much holding force, Brownells Barrel Vise must be firmly bolted to the stoutest bench or immovable base to fully realize its greatest potential. Aluminum, split barrel bushings come in eight different hole sizes and one, special, pre-machined bushing to make this universal Barrel Vise system the very first choice of professional gunsmit hs. Steel Bushings provide years of service, plus have the necessary clamping power to break loose the tightest barrels. Aluminium Bushings give exceptional holding ability without marking your barrel. Allen Head Bolt Kit - ½"-20 tpi x 2" long. Used to hold Top and Bottom Blocks together. Kit includes four bolts and the correct, 3⁄8" Allen wrench for these bolts.

SPECS: Blocks - Steel, blued. Top Block; 4½" (11.4cm) x 3" (7.6cm) x 1½" (3.8cm). Bottom Block; 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish. 6160 aluminum, natural finish. #4, 7, 8, 9, 10 and 11 are in a range of I.D.'s to closely match the shank diameters of most rifle barrels. #5 Bushing; fits military Mauser 98 barrels. #6 Bushing tapered to fit Remington Factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy barrels on M1A/M14's and M1 Garand's. All bushings 3" long, 1¾" diameter. Barrel Vise Set comes complete with seven bushings (#5, 12 & 13 NOT included).

Newsletter