Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
050806000148 430106222
The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
89.9 89.9 1 CHF
Référence: 430106222
BROWNELLS BRN-4 BARREL NUT WRENCH
Ref Fabricant: BRN-4-BNW 050806000148
89.9 CHF 12 CHF 89.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: Brownells Modèle: BRN-4

Caractéristiques

Manufacture: Brownells Modèle: BRN-4 Poids du colis: 0.454kg Hauteur d'expédition: 25mm Largeur d'expédition: 76mm Longueur d'expédition: 64mm

Détails de l'article

Fabriqué au USA



The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
Newsletter