Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tube. Precision machined from high-quality steel, then Parkerized dark gray for wear resistance and a close match to factory rifle finishes.
SPECS: Steel, black, matte, Parkerized finish.
Altro...
Ultra-basso profilo, senza intoppo Design
Piastra adattatrice di profilo minimal fionda fornisce un attaccamento sicuro, ambidestro per singolo punto tattici brache su carabine o fucili convertiti con M4 buttstocks pieghevoli. Il ciclo di attaccamento centri sotto il ricevitore estensione dado, fuori strada, dove non è possibile intoppo su abbigliamento, attrezzi, pennello o fionda e non interferisce con l'accesso alla leva del selettore. Aiuta arma appendere piatta contro il vostro corpo quando viene rilasciato, ancora permette anche veloce, positivo ri-presa quando necessario. Accetta la maggior parte dei ganci di fionda, inclusi ganci MASH, H & K connettori e fermagli ZM-stile. Si inserisce il stock pieghevole M4-tipo con tubi tampone mil-spec e commerciale, comprese le conversioni di fucile che utilizzano il tubo M4. Precisione lavorata da acciaio di alta qualità, finiture poi Parkerized grigio scuro per la resistenza all'usura e una partita vicino al fucile di fabbrica.
Punteggi dei clienti per CROSSTAC SINGLE-POINT SLING ADAPTER
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.5
Minimul bulk, and gets the job done.(05.09.2009)
This thing is great. You don't have the bulk of loops sticking out near the charging handle and it's completely ambidextrous.
May not be able to use all 6 positions(06.09.2009)
I just built another carbine using this item with a 6-position mil-spec tube and Magpul MOE mil-spec stock. After install was done, I found the stock wouldn't go all the way forward as it hits against the sling connection point. I tried backing the tube out but it was already at the proper depth in order to engage the buffer retainer. 5 out of 6 positions on the stock isn't a huge deal for me personally but somebody else may feel shorted. I would only recommend this to another user if they are aware of the above limitations on stock positions. Does it work for a single point sling attachment? Yes.
Great No-snag design(25.11.2010)
Installed this on 2 of my 5 ARs and it beats most other designs for single point sling attachment. The ones with eyelets off to the side get hung up on your vest and clothing and ruin the sleek lines of your rifle. The only modification you need to make to your stock is remove a very small ammount of material if you wish to use the shortest setting on your 6 position stock. Very unnoticable.
Like it(16.02.2011)
With the exception already mentioned of not being able to collaspe the stock all the way I like this better. You're not stuck with the sling being on one side of the rifle. I switched shoulders on occasion this allow me to do that much easier.
Good design(14.05.2011)
Great product. Works as specified, well design. Product fits out of the way and does not catch on clothing. Works well for both left and right handed shooters.
GREAT PRODUCT(27.06.2011)
Installed this on my AR and it beats most other designs for single point sling attachment. Dose not get hungup on clothing & Tactical Vest & other equipment when making forced entries (Yes I Am A Police Officer). The only modification you need to make to your stock is remove a small ammount of material where the adaptor rest against the stock if you wish to use the shortest setting on your 6 position stock. This I did with a Dremmil Tool In About 15 Secounds Very unnoticable. I recomend this item to all Law Enforcement Officers.
Strong sling mount, made in USA.(07.02.2012)
Very well built sling mount. Solid high strength steel, made in USA. Non-protrusive sling mount, nothing sticking out of the footprint of the gun. Accepts any sling hook or pin adapter. I use a mash hook and single point Viper sling. Very comfortable after hours of use. Works for lefties too. Highly recommended.
Works great, no snags(07.03.2012)
Does exactly what I needed without being noisy like the Magpul ASAP, and without messing with the lines of the rifle or snagging on clothing.
Low Profile Sling Adapter(13.07.2016)
This sling adapter works very well on my S&W M&P15 carbine. I bought it because other adapters or the sling would interfere with the back of my firing hand. This is low profile and is a good fit for my single-point sling.
Works perfect with B5 Bravo Stock(19.11.2017)
This is a rock solid single point sling adaptor end plate.
Both anti rotation areas which stabilize the buffer tube and the end plate itself are not added on, they are solid extensions of the plate.
Dimensions and tolerances are perfect.
As it is already stated, most of the buttstocks will not go down to the castle nut and lock to the first notch on the buffer tube, but the shorter buttstocks such as B5 Bravo buttstock work perfect with the loop. This con is the only reason keeping me giving five stars to this product.
And yes, I recommend it to whom are looking for a low profile, minimalist single point sling adaptor.
N. prodotto: 100003181 CROSSTAC SINGLE-POINT SLING ADAPTER Parti Fabbricante: 135020BLK852741000685 Piastra adattatrice di profilo minimal fionda fornisce un attaccamento sicuro, ambidestro per singolo punto tattici brache su carabine o fucili convertiti con M4 buttstocks pieghevoli. Il ciclo di attaccamento centri sotto il ricevitore estensione dado, fuori strada, dove non è possibile intoppo su abbigliamento, attrezzi, pennello o fionda e non interferisce con l'accesso alla leva del selettore. Aiuta arma appendere piatta contro il vostro corpo quando viene rilasciato, ancora permette anche veloce, positivo ri-presa quando necessario. Accetta la maggior parte dei ganci di fionda, inclusi ganci MASH, H & K connettori e fermagli ZM-stile. Si inserisce il stock pieghevole M4-tipo con tubi tampone mil-spec e commerciale, comprese le conversioni di fucile che utilizzano il tubo M4. Precisione lavorata da acciaio di alta qualità, finiture poi Parkerized grigio scuro per la resistenza all'usura e una partita vicino al fucile di fabbrica.
37.9CHF34CHF 37.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
AR-15
Colore:
Black
Materiale:
Acciaio
Tipo:
Rifle Sling Adapter
Peso della spedizione: 0.005kgAltezza di spedizione: 25mmLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tube. Precision machined from high-quality steel, then Parkerized dark gray for wear resistance and a close match to factory rifle finishes.
SPECS: Steel, black, matte, Parkerized finish.
Altro...
Ultra-basso profilo, senza intoppo Design
Piastra adattatrice di profilo minimal fionda fornisce un attaccamento sicuro, ambidestro per singolo punto tattici brache su carabine o fucili convertiti con M4 buttstocks pieghevoli. Il ciclo di attaccamento centri sotto il ricevitore estensione dado, fuori strada, dove non è possibile intoppo su abbigliamento, attrezzi, pennello o fionda e non interferisce con l'accesso alla leva del selettore. Aiuta arma appendere piatta contro il vostro corpo quando viene rilasciato, ancora permette anche veloce, positivo ri-presa quando necessario. Accetta la maggior parte dei ganci di fionda, inclusi ganci MASH, H & K connettori e fermagli ZM-stile. Si inserisce il stock pieghevole M4-tipo con tubi tampone mil-spec e commerciale, comprese le conversioni di fucile che utilizzano il tubo M4. Precisione lavorata da acciaio di alta qualità, finiture poi Parkerized grigio scuro per la resistenza all'usura e una partita vicino al fucile di fabbrica.
Punteggi dei clienti per CROSSTAC SINGLE-POINT SLING ADAPTER
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.5
Minimul bulk, and gets the job done.(05.09.2009)
This thing is great. You don't have the bulk of loops sticking out near the charging handle and it's completely ambidextrous.
May not be able to use all 6 positions(06.09.2009)
I just built another carbine using this item with a 6-position mil-spec tube and Magpul MOE mil-spec stock. After install was done, I found the stock wouldn't go all the way forward as it hits against the sling connection point. I tried backing the tube out but it was already at the proper depth in order to engage the buffer retainer. 5 out of 6 positions on the stock isn't a huge deal for me personally but somebody else may feel shorted. I would only recommend this to another user if they are aware of the above limitations on stock positions. Does it work for a single point sling attachment? Yes.
Great No-snag design(25.11.2010)
Installed this on 2 of my 5 ARs and it beats most other designs for single point sling attachment. The ones with eyelets off to the side get hung up on your vest and clothing and ruin the sleek lines of your rifle. The only modification you need to make to your stock is remove a very small ammount of material if you wish to use the shortest setting on your 6 position stock. Very unnoticable.
Like it(16.02.2011)
With the exception already mentioned of not being able to collaspe the stock all the way I like this better. You're not stuck with the sling being on one side of the rifle. I switched shoulders on occasion this allow me to do that much easier.
Good design(14.05.2011)
Great product. Works as specified, well design. Product fits out of the way and does not catch on clothing. Works well for both left and right handed shooters.
GREAT PRODUCT(27.06.2011)
Installed this on my AR and it beats most other designs for single point sling attachment. Dose not get hungup on clothing & Tactical Vest & other equipment when making forced entries (Yes I Am A Police Officer). The only modification you need to make to your stock is remove a small ammount of material where the adaptor rest against the stock if you wish to use the shortest setting on your 6 position stock. This I did with a Dremmil Tool In About 15 Secounds Very unnoticable. I recomend this item to all Law Enforcement Officers.
Strong sling mount, made in USA.(07.02.2012)
Very well built sling mount. Solid high strength steel, made in USA. Non-protrusive sling mount, nothing sticking out of the footprint of the gun. Accepts any sling hook or pin adapter. I use a mash hook and single point Viper sling. Very comfortable after hours of use. Works for lefties too. Highly recommended.
Works great, no snags(07.03.2012)
Does exactly what I needed without being noisy like the Magpul ASAP, and without messing with the lines of the rifle or snagging on clothing.
Low Profile Sling Adapter(13.07.2016)
This sling adapter works very well on my S&W M&P15 carbine. I bought it because other adapters or the sling would interfere with the back of my firing hand. This is low profile and is a good fit for my single-point sling.
Works perfect with B5 Bravo Stock(19.11.2017)
This is a rock solid single point sling adaptor end plate.
Both anti rotation areas which stabilize the buffer tube and the end plate itself are not added on, they are solid extensions of the plate.
Dimensions and tolerances are perfect.
As it is already stated, most of the buttstocks will not go down to the castle nut and lock to the first notch on the buffer tube, but the shorter buttstocks such as B5 Bravo buttstock work perfect with the loop. This con is the only reason keeping me giving five stars to this product.
And yes, I recommend it to whom are looking for a low profile, minimalist single point sling adaptor.