Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
657780250011 943000047
Standard Power Rifle Length Buffer Spring.The Green spring is for use in A1 / A2 fixed stock rifle length receiver extensions (buffer tubes) with rifle length buffers. It is also extremely popular in intermediate depth (7.75 “ deep) VLTOR A5 buffer tubes with 4” A5 buffers. The spring design loads of the Green spring are those of a BRAND NEW mil-spec buffer spring. While the Green spring is primarily for use with lesser calibers such as .223, 5.56. 6.8 SPC, 6.5 Grendel, 7.62 X 39, etc. in A2 rifle length tubes, it may sometimes be appropriate for use in long BBL (20”+) rifle length gas BBL’s in heavier calibers such as .308 and 6.5 CM, .260 Rem, etc.. (May not be effective for unsuppressed 7.62 X 51) In the latter scenario, an H2 or H3 carbine buffer has been used successfully in rifle length tubes with the Green spring. Over gassed heavier caliber guns with rifle length tubes may be addressed with our Red or Orange carbine springs and standard length 3.25” carbine buffers along with a spacer to yield the appropriate tube depth for the longer BCG’s.
35.9 38.9 3 CHF
Référence: 943000047
SPRINCO USA M16 RIFLE CS BUFFER SPRING STAND-ALONE
Ref Fabricant: 25001 657780250011
35.9 CHF 51 CHF 35.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.086kg Hauteur d'expédition: 25mm Largeur d'expédition: 25mm Longueur d'expédition: 337mm

Détails de l'article

Fabriqué au USA



Référence: 943000046
SPRINCO USA SPRING KIT STD BUFFER SPRING&ENHANCED 4COIL EXTRACT SPRING
Ref Fabricant: 25042 657780250424
38.9 CHF 7 CHF 38.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 943000045
SPRINCO USA SPRING KIT STD BUFFER SPRING & HD 5-COIL EXTRACTOR SPRING
Ref Fabricant: 25002 657780250028
38.9 CHF 21 CHF 38.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Standard Power Rifle Length Buffer Spring.The Green spring is for use in A1 / A2 fixed stock rifle length receiver extensions (buffer tubes) with rifle length buffers. It is also extremely popular in intermediate depth (7.75 “ deep) VLTOR A5 buffer tubes with 4” A5 buffers. The spring design loads of the Green spring are those of a BRAND NEW mil-spec buffer spring. While the Green spring is primarily for use with lesser calibers such as .223, 5.56. 6.8 SPC, 6.5 Grendel, 7.62 X 39, etc. in A2 rifle length tubes, it may sometimes be appropriate for use in long BBL (20”+) rifle length gas BBL’s in heavier calibers such as .308 and 6.5 CM, .260 Rem, etc.. (May not be effective for unsuppressed 7.62 X 51) In the latter scenario, an H2 or H3 carbine buffer has been used successfully in rifle length tubes with the Green spring. Over gassed heavier caliber guns with rifle length tubes may be addressed with our Red or Orange carbine springs and standard length 3.25” carbine buffers along with a spacer to yield the appropriate tube depth for the longer BCG’s.
Newsletter