Caractéristiques
- Couleur: Noir
- Finition: Noir
- Matériaux: Rubber
- Type d'arme: Universel Carabine
- Poids du colis: 0.068kg
- Hauteur d'expédition: 8mm
- Largeur d'expédition: 145mm
- Longueur d'expédition: 229mm
- UPC: 730412000564
Le prix inclut la TVA mais pas la livraison .
Référence: 440703140
N° fabr.: 703-140
730412000564 Détache et colle sur n'importe quelle joue et mets fin à la sensation de douleur et de fatigue le lendemain du tir. Caoutchouc absorbant de recul Sorbothane® authentique, pré-découpé avec un dos adhésif pour s'adapter rapidement aux fusils de chasse ou aux carabines à fort recul. Trois épaisseurs permettent des ajustements rapides de la hauteur de la crosse.Simple, effective solution 12.01.2015
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
Must Have... 11.10.2013
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em.
The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock.
To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad.
I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important.
Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink.
My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.