Caratteristiche
- Peso della spedizione: 0.045kg
- Altezza di spedizione: 10mm
- Larghezza di spedizione: 79mm
- Lunghezza di spedizione: 155mm
- UPC: 050806023246
Prezzi comprensivi di IVA più spedizione
N. prodotto: 587036967
050806023246 Originariamente progettato per i lavoratori del metallo e i meccanici per rimuovere bulloni bloccati, questi estrattori pesanti afferrano il metallo per una trazione extra, consentendoti di applicare la forza necessaria per rimuovere un choke che si rifiuta di muoversi con strumenti ordinari. Disponibile per 12 e 20 gauge. Istruzioni complete incluse. Attenzione: possono verificarsi danni alla volata se utilizzato in modo scorretto.In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Prezzi comprensivi di IVA più spedizione
Progettato inizialmente per i lavoratori del metallo e i meccanici, il STUCK CHOKE REMOVAL TOOL è un estrattore robusto che permette di rimuovere i choke bloccati. Questi estrattori pesanti afferrano il metallo per una maggiore aderenza, consentendo di applicare la forza necessaria per rimuovere un choke che non si muove con gli strumenti ordinari.
Disponibile per calibri 12 e 20. Istruzioni complete incluse. Attenzione: danni alla volata possono verificarsi se utilizzato in modo scorretto.
Didn't work 12.08.2014
I tried to remove a stuck choke tube from a Bennelli shotgun with no luck at all. I had previously talked with a Brownell's consultant and was told to follow the written instructions that came with the tool. I did that to the letter. The cutting edges of the tool were softer than the choke tube metal and merely broke away as I tried to twist the tool.
I finally had to try another method of removal which I found on Youtube. I used JB Weld to glue in a deep well socket that was about 1/8 of an inch smaller in diameter than the choke tube. After letting it set up for 24 hours I used a ratchet to remove the socket which bonded to the choke tube.
I would return the tool to Brownells except that postage would cost as much as the tool.
Worked well 02.04.2014
I had an inventor DS choke tube stuck in an A5 thats about a year old. Tried everything to get the choke out to the point where wrenches wore the notches on the tube.
I bought this tool as a hail mary before relenting and going to a gunsmith. It took a couple tries and tapping the tool in harder, but with a crescent wrench and a couple sharp raps with a hammer to the tool was finally able to get the tube out. No damage to barrel, choke was not any more messed than before, junking it though.
You might have drive the tool in a little harder than you think.
Good price shipping was good, fedex is always good.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.