38,000 PSI;Flows At 650\ F. Highest Silver-Bearing Content Available In A Non-Zinc Solder
Higher tensile strength for a stronger bond on joints that are subject to a high degree of stress or vibration. Contains 95% Cadmium and 5% Silver that flows free at 640° to 650° F. (maximum temp. 740° F.). Bonds quickly to all types of steel including stainless steel. Not affected by hot, caustic bluing solutions or by baking after spray-finish applications. Use with Copper Bond Flux and adequate ventilation.
SPECS: Wire - 1/16" (1.6mm) diameter.
Mehr...
38.000 PSI; Durchflüsse bei 650 \ F. Höchster Silbergehalt, der in einem Nicht-Zink-Lötmittel verfügbar ist
Höhere Zugfestigkeit für eine stärkere Verbindung an Verbindungen, die starken Beanspruchungen oder Vibrationen ausgesetzt sind. Enthält 95% Cadmium und 5% Silber, das bei 640 bis 650 ° F (maximale Temperatur 740 ° F) frei fliesst. Haftet schnell auf allen Stahlsorten, einschliesslich Edelstahl. Keine Beeinträchtigung durch heisse, ätzende Bläulösungen oder durch Backen nach Spritzapplikationen. Mit Copper Bond Flux und ausreichender Belüftung verwenden.
SPEZIFIKATIONEN: Draht - 1,6 mm Durchmesser.
Mehr...
Kundenbewertungen zu BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1OZ WIRE
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 1
Can anyone get this to work?(18.05.2011)
I've used Force 44 for many years. And I also use higher temp silver solders. But for the life of me, I can't get this stuff to adhere to anything, especially stainlesses. And the Copper Bond Flux is being used. Originally it was purchased to reattach a shotgun rib. This is a tedious process (for me) anyway. I thought the complications of that job were the problem. But since, I've tried a dozen times to attach sight ramps and such with it, and always remove all and start over with a solder that works for me. If anyone gets it to work, I'm missing something not in the instructions.
Not for stainless(23.07.2012)
I tried to use this to install a front sight onto a stainless steel Ruger Blackhawk. I've been soldering, brazing, and welding since I was a teenager (a very long time ago). If your working on stainless, this is NOT for you.
Artikel-Nr.: 080649501 BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1OZ WIRE Höhere Zugfestigkeit für eine stärkere Verbindung an Verbindungen, die starken Beanspruchungen oder Vibrationen ausgesetzt sind. Enthält 95% Cadmium und 5% Silber, das bei 640 bis 650 ° F (maximale Temperatur 740 ° F) frei fliesst. Haftet schnell auf allen Stahlsorten, einschliesslich Edelstahl. Keine Beeinträchtigung durch heisse, ätzende Bläulösungen oder durch Backen nach Spritzapplikationen. Mit Copper Bond Flux und ausreichender Belüftung verwenden.
19.9CHF0CHF 19.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Gewicht:
1.0 oz
Versandgewicht: 0.023kgVersandhöhe: 8mmVersandbreite: 104mmVersandlänge: 175mm
Artikeldetails
Made in USA
Artikel-Nr.: 080649590 BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1LB WIRE Höhere Zugfestigkeit für eine stärkere Verbindung an Verbindungen, die starken Beanspruchungen oder Vibrationen ausgesetzt sind. Enthält 95% Cadmium und 5% Silber, das bei 640 bis 650 ° F (maximale Temperatur 740 ° F) frei fliesst. Haftet schnell auf allen Stahlsorten, einschliesslich Edelstahl. Keine Beeinträchtigung durch heisse, ätzende Bläulösungen oder durch Backen nach Spritzapplikationen. Mit Copper Bond Flux und ausreichender Belüftung verwenden.
Artikel-Nr.: 080649525 BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1/4LB WIRE Höhere Zugfestigkeit für eine stärkere Verbindung an Verbindungen, die starken Beanspruchungen oder Vibrationen ausgesetzt sind. Enthält 95% Cadmium und 5% Silber, das bei 640 bis 650 ° F (maximale Temperatur 740 ° F) frei fliesst. Haftet schnell auf allen Stahlsorten, einschliesslich Edelstahl. Keine Beeinträchtigung durch heisse, ätzende Bläulösungen oder durch Backen nach Spritzapplikationen. Mit Copper Bond Flux und ausreichender Belüftung verwenden.
49.9CHF0CHF 49.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
38,000 PSI;Flows At 650\ F. Highest Silver-Bearing Content Available In A Non-Zinc Solder
Higher tensile strength for a stronger bond on joints that are subject to a high degree of stress or vibration. Contains 95% Cadmium and 5% Silver that flows free at 640° to 650° F. (maximum temp. 740° F.). Bonds quickly to all types of steel including stainless steel. Not affected by hot, caustic bluing solutions or by baking after spray-finish applications. Use with Copper Bond Flux and adequate ventilation.
SPECS: Wire - 1/16" (1.6mm) diameter.
Mehr...
38.000 PSI; Durchflüsse bei 650 \ F. Höchster Silbergehalt, der in einem Nicht-Zink-Lötmittel verfügbar ist
Höhere Zugfestigkeit für eine stärkere Verbindung an Verbindungen, die starken Beanspruchungen oder Vibrationen ausgesetzt sind. Enthält 95% Cadmium und 5% Silber, das bei 640 bis 650 ° F (maximale Temperatur 740 ° F) frei fliesst. Haftet schnell auf allen Stahlsorten, einschliesslich Edelstahl. Keine Beeinträchtigung durch heisse, ätzende Bläulösungen oder durch Backen nach Spritzapplikationen. Mit Copper Bond Flux und ausreichender Belüftung verwenden.
SPEZIFIKATIONEN: Draht - 1,6 mm Durchmesser.
Mehr...
Kundenbewertungen zu BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1OZ WIRE
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 1
Can anyone get this to work?(18.05.2011)
I've used Force 44 for many years. And I also use higher temp silver solders. But for the life of me, I can't get this stuff to adhere to anything, especially stainlesses. And the Copper Bond Flux is being used. Originally it was purchased to reattach a shotgun rib. This is a tedious process (for me) anyway. I thought the complications of that job were the problem. But since, I've tried a dozen times to attach sight ramps and such with it, and always remove all and start over with a solder that works for me. If anyone gets it to work, I'm missing something not in the instructions.
Not for stainless(23.07.2012)
I tried to use this to install a front sight onto a stainless steel Ruger Blackhawk. I've been soldering, brazing, and welding since I was a teenager (a very long time ago). If your working on stainless, this is NOT for you.