A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail. Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.
SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.
Robuste Optik-Montage für dein AK-47
Der AK SCOUT MOUNT MODE M1-B von ULTIMAK ist die perfekte Lösung, um deine Premium-Optiken auf deinem AK-47 zu montieren. Mit der steigenden Beliebtheit von AK-basierten Gewehren in 3-Gun-Wettbewerben ist der Bedarf an einem handlichen, leichten und absolut zuverlässigen Sichtsystem gewachsen.
Produktbeschreibung
Der UltiMAK M1-B Optik-Mount bietet eine Picatinny-Schiene, die gut unter der Achse der Kimme positioniert ist, was ihn zur niedrigsten Optik-Montage für das AK macht. Mit einer tief montierten, tubularen Optik kannst du dein Visier ohne einen Wangenauflage nutzen und behältst dennoch deine gewohnte Halteweise. Das System ermöglicht Co-Witnessing, also die Verwendung deiner Kimme direkt durch ein 1x Visier als Backup-Sichtsystem, wenn es mit einer tubulären Reflex-Optik verwendet wird.
Dieser robuste Mount ersetzt das originale Stahl-Gasrohr und den oberen Handschutz, sodass er weniger als ein Unze zum Gewicht des Gewehrs hinzufügt. Damit ist er die leichteste Optik-Montageinstallation der Welt. Die vordere Positionierung der Optik ermöglicht dir schnelleres, einfacheres und natürlicheres Zielen, während du dein gesamtes Sichtfeld behältst. Mehrfache Ziel- oder bewegliche Ziel-Engagements mit beiden Augen offen werden zur zweiten Natur.
Der UltiMAK AK Optik-Mount muss selten entfernt werden, um das Gewehr zu reinigen, sodass du dir keine Sorgen um den Verlust der Nullstellung machen musst. Da der Mount am Lauf befestigt ist und nicht zwischen dem Gasblock und dem Kimmenblock eingeklemmt ist wie das originale Gasrohr, haben mehrere UltiMAK-Nutzer von einer Verbesserung der inhärenten Genauigkeit ihrer AKs berichtet.
Technische Spezifikationen
- Material: 6061-T6 Aluminium, schwarz, matt
- Länge: 6-7/8" (17.5 cm)
- Gewicht: 6.7 oz. (189 g)
- Kompatibel mit allen 7.62x39 Kaliber-Gewehren, die originale Gasrohre ohne seitliche Gasportlöcher haben
- Installation kann geringfügige Anpassungen am Handschutz erfordern
Der UltiMAK Optics Mount wird mit 4140 Stahlklammern, Schrauben, einem Innensechskantschlüssel und einer Anleitung geliefert. Es sind keine Büchsenmacherarbeiten erforderlich!