Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

ULTIMAK
AK SCOUT MOUNT MODE M1-B

100000497
Low Mount Lets You Use Optics Or Iron Sights
A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail.  Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.

SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.

159.9 159.9 1 CHF
N. prodotto: 100000497
ULTIMAK AK-47 SCOPE MOUNT
Parti Fabbricante: M1B Una piattaforma solida per il vostro premio ottica. Con la crescente popolarità dei fucili AK basato in tre gare di pistola, la necessità di un pratico, leggero e completamente affidabile ad alta velocità sistema di avvistamento ha provocato l'attacco ottica UltiMAK M1-B. Sua guida di Picatinny stile è posizionato ben di sotto dell'asse di vista di ferro, rendendo il montaggio ottico minimo disponibile per l'AK. Con una vista tubolare montata in basso, sarete in grado di utilizzare il vostro ottico senza un montante di pettine e ancora utilizzare il regolare possesso. Il sistema consente co assistendo (la possibilità di utilizzare le vostre viste di ferro proprio attraverso uno spettacolo di 1x come un sistema di backup avvistamento) quando viene utilizzato con un mirino reflex tubolare. Questo Monte pesanti sostituisce l'originale handguard tomaia e tubo di gas in acciaio, in modo che aggiunge meno di un'oncia al peso del fucile, rendendolo di gran lunga l'installazione Montaggio ottica più leggero al mondo. Il posizionamento in avanti dell'ottica ti offre più veloce, più facile e più naturale di targeting, mantenendo il vostro campo visivo completo. Più target o movimento gli impegni di destinazione, con entrambi gli occhi aperti, diventano una seconda natura. Il Monte di ottica AK UltiMAK raramente, se mai ha bisogno di essere rimosso per pulire il fucile, in modo da non dovete preoccuparti per perdita pari a zero. Poiché il Monte è fissato alla canna e non inceppato tra il gas e il blocco vista come il tubo di gas originale, diversi UltiMAK utenti hanno segnalato un miglioramento nella precisione intrinseca loro AKs. Slitta Picatinny/Weaver style. Sostituisce il tubo del gas. Morsetti direttamente per barrel per ottimale, precisione e massima stabilità foro di allineamento. Ottica di UltiMAK, il Monte è stato progettato per garantire la compatibilità con variazioni di fucile una vasta gamma di AK. Se avete un 7,62 x 39 calibro AK con barilotto di peso standard e una lunghezza standard, tubo gas rimovibile (circa sette pollici, o 17,7 centimetri nel complesso gas tubo lunghezza) il Monte dovrebbe integrarsi bene. Dobbiamo ancora trovare un fucile della descrizione di cui sopra che il nostro supporto non si adatta, fornendo che il fucile sia assemblato ragionevolmente dritto. Alcuni AKs sono blocchi di gas radicalmente disallineati rispetto al blocco di tacca di mira. In rari casi, questo può causare problemi di installazione del supporto per UltiMAK. Corpo in alluminio anodizzato 6061-T6 solido, un pezzo duro. È dotato di morsetti in acciaio 4140, viti, chiave a brugola e istruzioni. Nessun Gunsmithing.
159.9 CHF 5 CHF 159.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AK-47 Colore: Opaco Black Materiale: Alluminio Numero di basi: 1 pezzo Tipo: Basi tattiche

Caratteristiche

Adatto per: AK-47 Colore: Opaco Black Materiale: Alluminio Numero di basi: 1 pezzo Tipo: Basi tattiche Peso della spedizione: 0.204kg Altezza di spedizione: 6mm Larghezza di spedizione: 144mm Lunghezza di spedizione: 256mm

Dettagli dell'elemento

Made in Usa



Low Mount Lets You Use Optics Or Iron Sights
A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail.  Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.

SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.

Newsletter