GBRS GROUP ASSAULTER BELT SYSTEM V3 The GBRS Group Assaulter Belt utilizes a 2-belt system to create a lightweight, flexible yet rigid and stable platform to attach equipment, holsters, and accessories. This is done by using Type 13, 1-23/32” belt webbing (7000 lbs tensile strength) as the base, with a field of PALS webbing, laser cut from a semi-rigid woven thermo-polymer (patent pending). This ensures that your equipment is always secured to something rigid while allowing the belt to remain lightweight and comfortable. To round it off, we double “W” stitch the webbing to a load-rated, 1.75” AustriAlpin Cobra buckle with a D-ring for attaching helo lanyards and other equipment. The outer belt has an inner facing of “loop” style Velcro, to attach to a low profile “hook” inner belt. We did this because hooks should never be worn towards the body, especially in such a high-wear area (belt line). The inner belt system consists of a low profile “hook” inner belt with a single layer of 1.5” scuba webbing. This results in a system that doubles as a non-metallic EDC belt and is a comfortable and convenient way to cover the abrasive hook portion of the inner belt when flipped inside out. The single layer of scuba webbing allows for a rigid surface for IWB holsters to secure firmly. SPECS Outer Belt ONE-WRAP® ¾” Loop 1” & 1.5” Binding ¾” Tegris 12 Layer AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN* Webbing Type 13, 1-23/32” Inner Belt 3610 Low Profile Loop 1.5” HTH Extruded Hook 841 1.5” Scuba Webbing 1.5” Weight: Inner and Outer Belt Total Small: 12.9 oz. Medium: 13.8 oz. Large: 14.7 oz. X-Large: 16.8 oz. *BUCKLE DISCLAIMER: The Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH Regulation) protects the environment against the harmful effects of chemical substances. 2023 changes to this regulation may or may not have visually affected the buckle on our V3 belt. This minimal visual difference does not affect the functionality of the belt. COMPATIBILITY: All MOLLE weave pouches/ products Holsters with belt loops (EX: Safariland® 6075UBL) True North Modular Holster Adapters SIZING: **Measure your waistline circumference for correct measurements, do not use pants size*** Size S fits waist sizes 27”-32” Ideal fit 27”-31” 17 MOLLE spaces Size M fits waist sizes 31”-36 “ Ideal fit 31”-34” 20 MOLLE spaces Size L fits waist sizes 35”-41” Ideal fit 35”-39” 23 MOLLE spaces Size XL fits waist sizes 40”-50” Ideal fit 40”-46” 26 MOLLE spaces
Entdecke das ASSAULTER BELT SYSTEM V3 von GBRS GROUP!
Das GBRS Group Assaulter Belt System V3 ist die perfekte Lösung für alle, die eine leichte, flexible und gleichzeitig stabile Plattform für ihre Ausrüstung suchen. Mit einem innovativen 2-Gurtsystem kannst du Holster und Zubehör sicher befestigen.
Produktbeschreibung
Der Gürtel nutzt ein Type 13, 1-23/32” Gürtelgewebe mit einer Zugfestigkeit von 7000 lbs als Basis. Durch die Verwendung von PALS-Webbing, das aus einem halbsteifen, gewebten Thermo-Polymer (Patent angemeldet) laser-cut gefertigt wurde, bleibt deine Ausrüstung stets an einem stabilen Punkt befestigt, während der Gürtel gleichzeitig leicht und komfortabel bleibt.
Um die Stabilität zu gewährleisten, ist der Gürtel doppelt mit einem „W“-Stich auf einen 1.75” AustriAlpin Cobra Buckle genäht, der mit einem D-Ring zum Befestigen von Helo-Lanyards und anderem Equipment ausgestattet ist. Der äussere Gürtel hat eine innere „Schleifen“-Velcro-Oberfläche, die sich mit einem flachen „Haken“-Innengürtel verbindet. Dies ist wichtig, da Haken nicht direkt am Körper getragen werden sollten, besonders in einem stark beanspruchten Bereich wie dem Gürtelbereich.
Das Innengürtelsystem besteht aus einem flachen „Haken“-Innengürtel mit einer einzelnen Schicht aus 1.5” Scuba-Webbing. Dies ermöglicht es dir, den Gürtel auch als nicht-metallischen EDC-Gürtel zu verwenden, während es gleichzeitig eine komfortable Möglichkeit bietet, den abrasiven Hakenbereich des Innengürtels beim Wenden nach innen zu verdecken. Die einzelne Schicht aus Scuba-Webbing sorgt für eine stabile Oberfläche, damit IWB-Holster sicher befestigt werden können.
Technische Spezifikationen
- Äusserer Gürtel:
- ONE-WRAP® ¾”
- Loop 1” & 1.5”
- Binding ¾”
- Tegris 12 Layer
- AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN*
- Webbing Type 13, 1-23/32”
- Innerer Gürtel:
- 3610 Low Profile Loop 1.5”
- HTH Extruded Hook 841 1.5”
- Scuba Webbing 1.5”
Gewicht
- Klein: 12.9 oz.
- Mittel: 13.8 oz.
- Gross: 14.7 oz.
- X-Gross: 16.8 oz.
*BUCKLE-HINWEIS: Die Registrierung, Bewertung, Genehmigung und Beschränkung von Chemikalien (REACH-Verordnung) schützt die Umwelt vor den schädlichen Auswirkungen chemischer Substanzen. Änderungen an dieser Verordnung im Jahr 2023 könnten das Aussehen des Schnallensystems unseres V3-Gürtels minimal beeinflusst haben, was jedoch die Funktionalität des Gürtels nicht beeinträchtigt.
Kompatibilität
- Alle MOLLE-Webtaschen/-produkte
- Holster mit Gürtelösen (z.B. Safariland® 6075UBL)
- True North Modular Holster Adapters
Grössen
**Miss deinen Taillenumfang für die korrekten Masse, benutze keine Hosengrösse***
- Grösse S passt für Taillengrössen 27”-32” (ideale Passform 27”-31”) – 17 MOLLE Plätze
- Grösse M passt für Taillengrössen 31”-36” (ideale Passform 31”-34”) – 20 MOLLE Plätze
- Grösse L passt für Taillengrössen 35”-41” (ideale Passform 35”-39”) – 23 MOLLE Plätze
- Grösse XL passt für Taillengrössen 40”-50” (ideale Passform 40”-46”) – 26 MOLLE Plätze